Export limit exceeded: 419546 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 419546 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (28538 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-45257 | 1 Freebsd | 1 Freebsd | 2026-06-26 | 7.8 High |
| The KTLS receive path decrypted each record in place, assuming that the mbufs holding received data were anonymous and safe to modify. This assumption does not hold for data placed on a socket by sendfile(2), which can reference file-backed memory directly through non-anonymous M_EXTPG pages or EXT_SFBUF mbufs. When the sender transmits such data over a loopback connection without enabling KTLS on the transmit side, the file-backed mbufs reach the receiver's decryption path unchanged. Decrypting a record in place then overwrites the backing file's page cache instead of a private copy of the data. An unprivileged local user who can read a file can overwrite its contents with data of their choosing by sending the file over a loopback connection on which they have enabled KTLS receive. The write modifies the page cache directly, so it bypasses file flags such as schg and is written back to disk. By overwriting a setuid binary or other trusted file, a local user can escalate privileges, potentially gaining full control of the affected system. | ||||
| CVE-2026-57454 | 1 Vim | 1 Vim | 2026-06-26 | 6.1 Medium |
| Vim is an open source, command line text editor. From 9.2.0320 until 9.2.0679, a crafted undo or swap file can store a virtual-text property whose offset and length point outside the line's property data. When Vim restores or displays such a line it converts the offset into a pointer and reads the virtual text without bounds checking, causing an out-of-bounds read that can crash Vim or disclose adjacent heap memory. This vulnerability is fixed in 9.2.0679. | ||||
| CVE-2026-57880 | 1 Geovision Inc. | 1 Gv-lpclpc2011 2211 | 2026-06-26 | 9.8 Critical |
| An unauthenticated stack-based buffer overflow vulnerability exists in ssvr in GeoVision GV-LPC2011 and GV-LPC2211 V1.12 and earlier. The vulnerability is caused by insufficient bounds checking when parsing RTSP Digest authentication fields. A remote attacker may exploit this vulnerability by sending a crafted RTSP request containing overly long authentication data, resulting in memory corruption, denial of service, or potentially arbitrary code execution. | ||||
| CVE-2026-57881 | 1 Geovision Inc. | 1 Gv-lpclpc2011 2211 | 2026-06-26 | 9.8 Critical |
| An unauthenticated stack-based buffer overflow vulnerability exists in vlsvr in GeoVision GV-LPC2011 and GV-LPC2211 V1.12 and earlier. The vulnerability is caused by insufficient length validation when processing remote login data. A remote attacker may exploit this vulnerability by sending crafted login data with overly long input, resulting in memory corruption, denial of service, or potentially arbitrary code execution. | ||||
| CVE-2026-57878 | 1 Geovision Inc. | 1 Gv-lpclpc2011 2211 | 2026-06-26 | 9.8 Critical |
| An unauthenticated stack-based buffer overflow vulnerability exists in thttpd in GeoVision GV-LPC2011 and GV-LPC2211 V1.12 and earlier. The vulnerability is caused by insufficient bounds checking when processing web request parameters in a specific request path. A remote attacker may exploit this vulnerability by sending a crafted HTTP request with overly long input, resulting in memory corruption, denial of service, or potentially arbitrary code execution. | ||||
| CVE-2026-52992 | 1 Linux | 1 Linux Kernel | 2026-06-26 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: fs/adfs: validate nzones in adfs_validate_bblk() Reject ADFS disc records with a zero zone count during boot block validation, before the disc record is used. When nzones is 0, adfs_read_map() passes it to kmalloc_array(0, ...) which returns ZERO_SIZE_PTR, and adfs_map_layout() then writes to dm[-1], causing an out-of-bounds write before the allocated buffer. adfs_validate_dr0() already rejects nzones != 1 for old-format images. Add the equivalent check to adfs_validate_bblk() for new-format images so that a crafted image with nzones == 0 is rejected at probe time. Found by syzkaller. | ||||
| CVE-2026-53136 | 1 Linux | 1 Linux Kernel | 2026-06-26 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Clamp VBIOS HDMI retimer register count to array size [Why & How] The VBIOS integrated info tables (v1_11 and v2_1) contain HdmiRegNum and Hdmi6GRegNum fields that are used as loop bounds when copying retimer I2C register settings into fixed-size arrays (dp*_ext_hdmi_reg_settings[9] and dp*_ext_hdmi_6g_reg_settings[3]). These u8 fields are not validated before use, so a malformed VBIOS can specify values up to 255, causing an out-of-bounds heap write during driver probe. Clamp each register count to the destination array size using min_t() before the copy loops, in both get_integrated_info_v11() and get_integrated_info_v2_1(). (cherry picked from commit 5a7f0ef90195940c54b0f5bb85b87da55f038c69) | ||||
| CVE-2026-53241 | 1 Linux | 1 Linux Kernel | 2026-06-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: seq: dummy: fix UMP event stack overread The dummy sequencer port forwards events by copying an incoming struct snd_seq_event into a stack temporary, rewriting source and destination, and dispatching the temporary to subscribers. That legacy event storage is smaller than struct snd_seq_ump_event. When a UMP event reaches the dummy client, the copy leaves the UMP flag set but only provides legacy-sized stack storage. The subscriber delivery path then uses snd_seq_event_packet_size() and copies a UMP-sized packet from that stack object, reading past the end of the temporary. Use the existing union __snd_seq_event storage and copy the packet size reported for the incoming event before rewriting the common routing fields. This preserves the full UMP packet for UMP events while keeping legacy event handling unchanged. | ||||
| CVE-2026-53195 | 1 Linux | 1 Linux Kernel | 2026-06-26 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: USB: serial: io_ti: fix heap overflow in build_i2c_fw_hdr() build_i2c_fw_hdr() allocates a fixed-size buffer of (16*1024 - 512) + sizeof(struct ti_i2c_firmware_rec) bytes, then copies le16_to_cpu(img_header->Length) bytes into it without validating that Length fits within the available space after the firmware record header. img_header->Length is a __le16 from the firmware file and can be up to 65535. check_fw_sanity() validates the total firmware size but not img_header->Length specifically. Fix by rejecting images where img_header->Length exceeds the available destination space. | ||||
| CVE-2026-12340 | 1 Wolfssl | 1 Wolfssl | 2026-06-26 | 7.5 High |
| Out-of-bounds heap read during SM2/SM3 certificate signature verification. When parsing a certificate with an SM3wSM2 signature, the Subject Key Identifier computation reads the trailing 65 bytes of the public key without checking that the key is at least that long. A public key shorter than 65 bytes results in an out-of-bounds heap read, leading to a potential crash (denial of service); there is no out-of-bounds write. Note this only affects builds with SM2 support (--enable-sm2 or --enable-all). | ||||
| CVE-2026-6681 | 1 Wolfssl | 1 Wolfssl | 2026-06-26 | 5.3 Medium |
| The PKCS#7 decode path ignores the caller-supplied output buffer size (outputSz), allowing decoded content to be written past the bounds of the provided buffer. This affects wolfSSL 5.9.0 and earlier and was fixed in the 5.9.1 release. | ||||
| CVE-2026-52721 | 2 Gstreamer Project, Redhat | 2 Gstreamer Plugin, Enterprise Linux | 2026-06-26 | 5.3 Medium |
| Multiple out-of-bounds read vulnerabilities were found in GStreamer's pcapparse element. Malformed PCAP records can trigger reads beyond buffer boundaries during IPv4/TCP header parsing. This element is primarily used in debugging pipelines, limiting real-world exposure. A local attacker could trick a user into processing a specially crafted PCAP file, potentially leading to a crash or information disclosure. | ||||
| CVE-2025-26240 | 1 Jazzcore | 1 Python-pdfkit | 2026-06-26 | 8.4 High |
| In JazzCore python-pdfkit 1.0.0, the from_string method enables the execution of JavaScript code within the context of the server application and the exfiltration of local files. | ||||
| CVE-2026-4526 | 2 Silabs, Silicon Labs | 2 Emberznet, Emberznet | 2026-06-26 | 6.5 Medium |
| In EmberZNet v9.0.2 and earlier, malformed global ZCL messages can trigger out-of-bounds reads in framework parsing logic and terminate the process. These messages must come from a device that has already joined the network, and no information leakage back to the sender was observed. | ||||
| CVE-2026-47147 | 2 Silabs, Silicon Labs | 2 Emberznet, Emberznet | 2026-06-26 | 7.1 High |
| In EmberZNet v9.0.2 and earlier, malformed OTA requests can drive the OTA server parser into out-of-bounds reads. A limited amount of data from RAM is read back to the requester. The size and location of this data is limited. These requests must come from a device that has already joined the network. Only devices supporting the OTA Server cluster may be impacted. | ||||
| CVE-2026-47148 | 2 Silabs, Silicon Labs | 2 Emberznet, Emberznet | 2026-06-26 | 6.5 Medium |
| In EmberZNet v9.0.2 and earlier, malformed GetGroupMembership commands can trigger repeated reads past the end of the message payload and terminate the process. These messages must come from a device that has already joined the network, and no information leakage back to the sender was observed. Only devices supporting the Groups cluster may be impacted. | ||||
| CVE-2026-47149 | 2 Silabs, Silicon Labs | 2 Emberznet, Emberznet | 2026-06-26 | 6.5 Medium |
| In EmberZNet v9.0.2 and earlier, malformed or out-of-range Door Lock user identifiers can trigger out-of-bounds table reads and terminate the process. These messages must come from a device that has already joined the network, and no information leakage back to the sender was observed. Only devices supporting the Door Lock cluster may be impacted. | ||||
| CVE-2026-47154 | 2 Silabs, Silicon Labs | 2 Emberznet, Emberznet | 2026-06-26 | 6.5 Medium |
| In EmberZNet v9.0.2 and earlier, a malformed GetProfileResponse message can trigger out-of-bounds reads while iterating interval entries and terminate the process. These messages must come from a device that has already joined the network, and no information leakage back to the sender was observed. Only devices supporting the Simple Metering cluster may be impacted. | ||||
| CVE-2026-57235 | 2 Nokogiri, Sparklemotion | 2 Nokogiri, Nokogiri | 2026-06-26 | 8.2 High |
| Nokogiri is an open source XML and HTML library for the Ruby programming language. Prior to 1.19.4, Nokogiri::XML::NodeSet#[] (and its alias #slice) checked the requested index against the node set's bounds using a 32-bit-truncated copy of the index. A large negative index could pass the check and then be used at full width, reading outside the node set's storage. On CRuby this is an out-of-bounds read that typically crashes the process; on JRuby it is not memory-unsafe but returns an incorrect node. This vulnerability is fixed in 1.19.4. | ||||
| CVE-2026-57436 | 2 Nokogiri, Sparklemotion | 2 Nokogiri, Nokogiri | 2026-06-26 | 5.3 Medium |
| Nokogiri is an open source XML and HTML library for the Ruby programming language. Prior to 1.19.4, Nokogiri::XML::Document#root= validated only that the new root was a Nokogiri::XML::Node, allowing a DTD node to be set as the document root. The result is a heap use-after-free during garbage collection or finalization, leading to an invalid memory read or potentially a segfault. This vulnerability is fixed in 1.19.4. | ||||