| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In JetBrains TeamCity before 2026.1.3, 2025.11.7 XXE via Maven settings file upload was possible |
| In JetBrains TeamCity before 2026.1.3, 2025.11.7 XXE in the .NET build steps auto-discovery was possible |
| In JetBrains TeamCity before 2026.1.3, 2025.11.7 stored XSS in the Promote build dialog was possible |
| In JetBrains TeamCity before 2026.1.3, 2025.11.7 stored XSS on the Docker Container Info tab was possible |
| In JetBrains TeamCity before 2026.1.3, 2025.11.7 privilege escalation to system administrator was possible after disabling per-project permissions |
| In JetBrains TeamCity before 2026.1.3, 2025.11.7 improper authorization allowed viewing build process details via agent stacktraces |
| In JetBrains TeamCity before 2026.1.3 improper authorization allowed project viewers to change project IDs |
| In JetBrains TeamCity before 2026.1.3, 2025.11.7 stored XSS in the Shared Resources build feature was possible |
| In JetBrains TeamCity before 2026.1.3 privilege escalation was possible via Basic authentication with a restricted access token |
| In JetBrains TeamCity before 2026.2, 2026.1.4 reflected XSS in build problem details was possible |
| In JetBrains TeamCity before 2026.2, 2026.1.4, 2025.11.8 reflected XSS on the build feature parameters page was possible |
| In JetBrains TeamCity before 2026.2, 2026.1.4 reflected XSS in the build log tree view was possible |
| In JetBrains TeamCity before 2026.2 privilege escalation of project-scoped access tokens via concurrent project deletion was possible |
| In ConnectWise Automate versions prior to
2026.11, a condition in Web Control Center (WCC2) authorization handling could
allow an authenticated contact user to access information associated with other
clients on the same Automate server through API requests. This may result in
disclosure of information outside the user’s assigned access scope. The issue
is limited to information disclosure and does not extend existing modification
or command execution permissions. This issue is resolved in ConnectWise
Automate 2026.11. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: fix protected RX frame validation in decrypt path
The RX software decrypt path mishandles crafted protected frames from a
malicious AP in two ways:
1) decryptor() never checks that a protected frame is long enough to
hold the 802.11 header plus the per-cipher trailer. All of
rtw_wep_decrypt(), rtw_tkip_decrypt() and rtw_aes_decrypt() compute
length = hdr.len - hdrlen - iv_len;
and act on the result, and recvframe_chkmic() similarly computes
datalen = hdr.len - hdrlen - iv_len - icv_len - 8;
for TKIP (the 8-byte Michael MIC is not accounted for in icv_len).
A frame shorter than hdrlen + iv_len + icv_len (+ 8 for TKIP) underflows
these unsigned subtractions, turning into a ~4 GiB iteration count in
aes_decipher()/arc4_crypt()/rtw_seccalctkipmic() or a ~4 GiB crc32_le()
length, causing out-of-bounds reads/writes of up to ~4 GiB starting from
the rx skb. Reject such frames in decryptor() before touching the IV;
this covers all three ciphers and the TKIP MIC check, and also keeps the
unconditional iv[3] access within the frame.
2) validate_80211w_mgmt() keeps using the frame - two memcpys through
the stale rx_data pointer and a pkt_len update - before checking
whether decryptor() returned NULL. On decrypt failure (e.g. a unicast
protected deauth/disassoc/action frame with a bad MIC, which this path
always software-decrypts) the skb has already been freed, so this is a
use-after-free read/write, and the caller's error path frees the frame
a second time, drifting free_recvframe_cnt. Bail out immediately when
decryptor() fails, freeing the temporary mgmt_DATA buffer first.
Discovered by Atuin - Automated Vulnerability Discovery Engine. |
| In the Linux kernel, the following vulnerability has been resolved:
serial: core: shut down initialized port on removal
When a serial port configured as a console is opened and subsequently
closed, tty_port_shutdown() skips invoking port->ops->shutdown() because
port->console is true. As a result, tty_port_initialized() remains true
and the port's interrupt handler stays registered in the irq subsystem.
If the underlying device is later unbound or removed (e.g. via sysfs
driver unbind or device hot-unplug), serial_core_remove_one_port()
unregisters the console, frees uport->name via kfree(), and tears down
the port without shutting it down or freeing its IRQ. Consequently, the
irqaction descriptor remains registered in genirq with action->name
pointing to freed memory.
This triggers a use-after-free read whenever genirq accesses action->name,
such as when reading /proc/interrupts:
BUG: KASAN: slab-use-after-free in string+0x476/0x570
Call Trace:
string+0x476/0x570
vsnprintf+0x422/0x1300
seq_printf+0x...
show_interrupts+...
Fix this by acquiring port->mutex in serial_core_remove_one_port() after
console unregistration, clearing port->console under the mutex to prevent
data races with concurrent tty_port_shutdown(), and invoking
uart_shutdown(NULL, state) if the port remains initialized. This ensures
that port->ops->shutdown() is called and the IRQ is freed before
kfree(uport->name). |
| Use-after-free via repopulation of last_fatal_error_backtrace global after shutdown.
A fatal error raised while modified INI settings are restored during request shutdown can repopulate the stored fatal error backtrace after the executor has been cleaned up. The request memory is then freed, and a diagnostic emitted before executor initialization in a later request handled by the same PHP-FPM or mod_php worker can access the stale backtrace. The shutdown error requires per-path configuration of max_memory_limit, or of zlib.output_compression together with output_handler (which .user.ini can also set). The early diagnostic requires Apache per-directory configuration or, for PHP-FPM, a PHP_VALUE or PHP_ADMIN_VALUE parameter sent by the front end. This can cause memory corruption and worker crashes, and may allow remote code execution.
This issue affects PHP versions 8.5.* before 8.5.13. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: dc395x: sync the waiting_timer before freeing the host
The waiting_timer callback re-arms itself and takes the host lock.
adapter_uninit() currently stops it with timer_delete(), which does not
wait for a callback already running on another CPU. The final
scsi_host_put() that frees the host (and the host lock the callback
dereferences) runs right after adapter_uninit(), so a concurrent or just
re-armed callback can fire after the free, leaving a potential
use-after-free window.
Replace timer_delete() with timer_shutdown_sync() at the top of
adapter_uninit(), before the host-lock section: the timer is dequeued,
a running callback is waited for and rearming is blocked before the chip
is halted, so it cannot fire at all once the adapter has ceased to
function. Waiting outside the lock avoids the self-deadlock that would
result from syncing a callback blocked on the lock we still hold.
No shutdown is needed for selto_timer because it has no reachable armer
or callback.
This issue was found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
net: sched: prevent scheduling deactivated qdiscs
TAPRIO can schedule a deactivated qdisc after some_qdisc_is_busy() has
reported it idle.
Commit 47e8dbb6e763 ("net/sched: do not reset queues in graft operations")
made graft deactivation skip queue reset, leaving TAPRIO's timer armed.
A late callback schedules NET_TX softirq work, whose dequeue path can
race the unlocked child-queue reset in taprio_reset(). The same skb can
be queued for deferred freeing by RTNL and dequeued for transmission.
In the reproducer, the TAP reader frees it before __rtnl_unlock() reads
its next pointer. KASAN reports a slab-use-after-free in
__rtnl_unlock+0xa3/0xd0, with a read of size 8 from the freed skb.
Reject deactivated qdiscs in __netif_schedule(). Callers' RCU protection
lets the existing grace period join earlier scheduling calls before the
busy check. Restart nonempty transmit queues on reactivation so suppressed
scheduling does not strand packets. |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: virt-concat: unlink discarded items before freeing
mtd_virt_concat_destroy_items() frees each item without removing it
from concat_node_list. list_for_each_entry_safe() protects the
current traversal, but concat_node_list still points to the freed
items afterward.
The function also unwinds errors from mtd_virt_concat_node_create().
A later initialization can traverse a freed item in
mtd_is_part_concat(), causing a use-after-free.
Unlink each item before freeing it. |