| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A flaw was found in the QEMU Virtio PCI Bindings (hw/virtio/virtio-pci.c). An improper release and use of the irqfd for vector 0 during the boot process leads to a guest triggerable crash via vhost_net_stop(). This flaw allows a malicious guest to crash the QEMU process on the host. |
| A flaw was found in Ansible. The ansible-core `user` module can allow an unprivileged user to silently create or replace the contents of any file on any system path and take ownership of it when a privileged user executes the `user` module against the unprivileged user's home directory. If the unprivileged user has traversal permissions on the directory containing the exploited target file, they retain full control over the contents of the file as its owner. |
| Insufficient granularity of access control in UEFI firmware in some Intel(R) processors may allow a authenticated user to potentially enable denial of service via local access. |
| EDK2 contains a vulnerability when S3 sleep is activated where an Attacker may cause a Division-By-Zero due to a UNIT32 overflow via local access. A successful exploit of this vulnerability may lead to a loss of Availability. |
| Issue summary: Clients using RFC7250 Raw Public Keys (RPKs) to authenticate a
server may fail to notice that the server was not authenticated, because
handshakes don't abort as expected when the SSL_VERIFY_PEER verification mode
is set.
Impact summary: TLS and DTLS connections using raw public keys may be
vulnerable to man-in-middle attacks when server authentication failure is not
detected by clients.
RPKs are disabled by default in both TLS clients and TLS servers. The issue
only arises when TLS clients explicitly enable RPK use by the server, and the
server, likewise, enables sending of an RPK instead of an X.509 certificate
chain. The affected clients are those that then rely on the handshake to
fail when the server's RPK fails to match one of the expected public keys,
by setting the verification mode to SSL_VERIFY_PEER.
Clients that enable server-side raw public keys can still find out that raw
public key verification failed by calling SSL_get_verify_result(), and those
that do, and take appropriate action, are not affected. This issue was
introduced in the initial implementation of RPK support in OpenSSL 3.2.
The FIPS modules in 3.4, 3.3, 3.2, 3.1 and 3.0 are not affected by this issue. |
| EDK2 contains a vulnerability in the PeCoffLoaderRelocateImage(). An Attacker may cause memory corruption due to an overflow via an adjacent network. A successful exploit of this vulnerability may lead to a loss of Confidentiality, Integrity, and/or Availability. |
| PyMySQL through 1.1.0 allows SQL injection if used with untrusted JSON input because keys are not escaped by escape_dict. |
| Clients using DNS-over-HTTPS (DoH) can exhaust a DNS resolver's CPU and/or memory by flooding it with crafted valid or invalid HTTP/2 traffic.
This issue affects BIND 9 versions 9.18.0 through 9.18.32, 9.20.0 through 9.20.4, 9.21.0 through 9.21.3, and 9.18.11-S1 through 9.18.32-S1. |
| bt_sock_recvmsg in net/bluetooth/af_bluetooth.c in the Linux kernel through 6.6.8 has a use-after-free because of a bt_sock_ioctl race condition. |
| A flaw was found in the FreeIPA API audit, where it sends the whole FreeIPA command line to journalctl. As a consequence, during the FreeIPA installation process, it inadvertently leaks the administrative user credentials, including the administrator password, to the journal database. In the worst-case scenario, where the journal log is centralized, users with access to it can have improper access to the FreeIPA administrator credentials. |
| The urllib.parse.urlsplit() and urlparse() functions improperly validated bracketed hosts (`[]`), allowing hosts that weren't IPv6 or IPvFuture. This behavior was not conformant to RFC 3986 and potentially enabled SSRF if a URL is processed by more than one URL parser. |
| Starting in Python 3.12.0, the asyncio._SelectorSocketTransport.writelines()
method would not "pause" writing and signal to the Protocol to drain
the buffer to the wire once the write buffer reached the "high-water
mark". Because of this, Protocols would not periodically drain the write
buffer potentially leading to memory exhaustion.
This
vulnerability likely impacts a small number of users, you must be using
Python 3.12.0 or later, on macOS or Linux, using the asyncio module
with protocols, and using .writelines() method which had new
zero-copy-on-write behavior in Python 3.12.0 and later. If not all of
these factors are true then your usage of Python is unaffected. |
| readline.sh in socat before1.8.0.2 relies on the /tmp/$USER/stderr2 file. |
| A vulnerability has been identified in Node.js, affecting users of the experimental permission model when the --allow-fs-write flag is used.
Node.js Permission Model do not operate on file descriptors, however, operations such as fs.fchown or fs.fchmod can use a "read-only" file descriptor to change the owner and permissions of a file. |
| Having a large number of address headers (From, To, Cc, Bcc, etc.) becomes excessively CPU intensive. With 100k header lines CPU usage is already 12 seconds, and in a production environment we observed 500k header lines taking 18 minutes to parse. Since this can be triggered by external actors sending emails to a victim, this is a security issue. An external attacker can send specially crafted messages that consume target system resources and cause outage. One can implement restrictions on address headers on MTA component preceding Dovecot. No publicly available exploits are known. |
| Due to an incomplete fix to CVE-2022-31629 https://github.com/advisories/GHSA-c43m-486j-j32p , network and same-site attackers can set a standard insecure cookie in the victim's browser which is treated as a __Host- or __Secure- cookie by PHP applications. |
| A flaw was found in osbuild-composer. A condition can be triggered that disables GPG verification for package repositories, which can expose the build phase to a Man-in-the-Middle attack, allowing untrusted code to be installed into an image being built. |
| A timing-based side-channel flaw exists in the rust-openssl package, which could be sufficient to recover a plaintext across a network in a Bleichenbacher-style attack. To achieve successful decryption, an attacker would have to be able to send a large number of trial messages for decryption. The vulnerability affects the legacy PKCS#1v1.5 RSA encryption padding mode. |
| Expr is an expression language and expression evaluation for Go. Prior to version 1.17.0, if the Expr expression parser is given an unbounded input string, it will attempt to compile the entire string and generate an Abstract Syntax Tree (AST) node for each part of the expression. In scenarios where input size isn’t limited, a malicious or inadvertent extremely large expression can consume excessive memory as the parser builds a huge AST. This can ultimately lead to*excessive memory usage and an Out-Of-Memory (OOM) crash of the process. This issue is relatively uncommon and will only manifest when there are no restrictions on the input size, i.e. the expression length is allowed to grow arbitrarily large. In typical use cases where inputs are bounded or validated, this problem would not occur. The problem has been patched in the latest versions of the Expr library. The fix introduces compile-time limits on the number of AST nodes and memory usage during parsing, preventing any single expression from exhausting resources. Users should upgrade to Expr version 1.17.0 or later, as this release includes the new node budget and memory limit safeguards. Upgrading to v1.17.0 ensures that extremely deep or large expressions are detected and safely aborted during compilation, avoiding the OOM condition. For users who cannot immediately upgrade, the recommended workaround is to impose an input size restriction before parsing. In practice, this means validating or limiting the length of expression strings that your application will accept. For example, set a maximum allowable number of characters (or nodes) for any expression and reject or truncate inputs that exceed this limit. By ensuring no unbounded-length expression is ever fed into the parser, one can prevent the parser from constructing a pathologically large AST and avoid potential memory exhaustion. In short, pre-validate and cap input size as a safeguard in the absence of the patch. |
| The Fedora Secure Boot CA certificate shipped with shim in Fedora was expired which could lead to old or invalid signed boot components being loaded. |
