| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: avoid WARN in set_bitrate_mask when sdata not in driver
ieee80211_set_bitrate_mask() checks if the interface is running via
ieee80211_sdata_running(), but it does not check if the interface is
still present in the driver.
When sdata is running but IEEE80211_SDATA_IN_DRIVER is not set, the
call reaches drv_set_bitrate_mask() in driver-ops.h which hits
wlan1: Failed check-sdata-in-driver check, flags: 0x0
WARNING: net/mac80211/driver-ops.h:884 at drv_set_bitrate_mask
Syzkaller triggers this via wext SIOCSIWRATE ioctl. The Call Trace shows
wext_ioctl_dispatch() in wext-core.c dispatching the ioctl, calling
ioctl_standard_call() for SIOCSIWRATE, which calls cfg80211_wext_siwrate()
in wext-compat.c. That builds a bitrate mask and calls
rdev_set_bitrate_mask() which ends up in ieee80211_set_bitrate_mask() in
cfg.c. The interface is marked running via SDATA_STATE_RUNNING but
flags is 0, so check_sdata_in_driver() fails.
When the interface is being torn down, or when wext ioctl is issued
during interface bringup before drv_add_interface() sets IN_DRIVER, the
running check passes while IN_DRIVER is clear.
Check IEEE80211_SDATA_IN_DRIVER in ieee80211_set_bitrate_mask() before
calling the driver, returning -ENETDOWN. This avoids the WARN_ONCE in
driver-ops.h and matches other cfg.c operations that bail early when not
in driver.
This change should be safe because wiphy mutex is held in
cfg80211_wext_siwrate() via guard(wiphy), and IN_DRIVER is set/cleared
under RTNL and wiphy paths in drv_add_interface() and
drv_remove_interface() in driver-ops.c, so the check is race-free
against driver add/remove. Returning -ENETDOWN is the same error other
not-running paths use and does not introduce new locking.
[also add second syzbot report] |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rsi: fix heap OOB write on key removal
When a key is removed (data == NULL), rsi_hal_load_key() runs:
memset(&set_key[FRAME_DESC_SZ], 0, frame_len - FRAME_DESC_SZ);
set_key is a struct rsi_set_key *, so the subscript is scaled by
sizeof(struct rsi_set_key) (160 bytes): &set_key[FRAME_DESC_SZ] is
skb->data + 2560, and the memset writes 144 zero bytes starting
2.4KB past the end of the 160-byte skb data buffer, corrupting
unrelated heap objects. The intended byte offset would have been
(u8 *)set_key + FRAME_DESC_SZ.
The write fires on every DISABLE_KEY callback, so plain disconnects,
roams and interface teardowns trigger it on real networks.
The memset is redundant: the whole buffer is zeroed right after
allocation, so the frame sent to the device is byte-identical
without it. Drop the else branch; normal operation is unaffected.
Discovered by Atuin - Automated Vulnerability Discovery Engine. |
| In the Linux kernel, the following vulnerability has been resolved:
power: sequencing: fix NULL-pointer dereference in pwrseq_unit_new()
If memory allocation fails in pwrseq_unit_setup_deps(), pwrseq_unit_put()
is called to release the partially initialized unit. However, we've
never initialized unit->list and pwrseq_unit_release() will
unconditionally call list_del() on it. Initialize unit->list right after
allocating the unit struct. |
| In the Linux kernel, the following vulnerability has been resolved:
selinux: always fill AVC decision in avc_has_perm_noaudit()
avc_has_perm_noaudit() is documented to return a copy of the access
decision in @avd, but its early return for an empty requested permission
set leaves the buffer untouched. All callers pass an uninitialized
stack variable and afterwards feed it to avc_audit(), and the inode hook
even stores it in the per-task decision cache.
Fill in a deny-all, audit-all decision, similar to avd_init(), so every
caller receives a defined value at no cost on the hot path. |
| In the Linux kernel, the following vulnerability has been resolved:
net: xfrm: reject unrepresentable espintcp transport headers
ESP-in-TCP can hand xfrm packets whose transport header offset no longer
fits after the stream parser trims the TCP envelope. The plain transport
header reset truncates that offset and triggers the skb warning path.
Use the careful transport-header helper and drop the skb through the
existing XFRM error path when the offset cannot be represented. |
| In the Linux kernel, the following vulnerability has been resolved:
sched/core: Avoid false migration warning for proxy donors
Proxy execution can move a blocked donor's scheduling context to the
lock owner's CPU even when the donor is migration-disabled. The donor
does not execute there, and its original execution CPU remains recorded
in wake_cpu.
set_task_cpu() warns unconditionally for migration-disabled tasks, so a
subsequent proxy migration or the wakeup path returning the donor home
triggers a false positive: moving a blocked scheduling context does not
violate the migration-disabled execution context.
For example, creating a mutex owner on CPU1 and a migration-disabled
waiter on CPU0 can trigger the following warning:
proxy_migrate_repro: donor blocking on CPU0 with migration disabled
proxy_migrate_repro: donor moved from CPU0 to CPU1
WARNING: kernel/sched/core.c:3389 at set_task_cpu+0x1d3/0x280
...
Call Trace:
try_to_wake_up+0x43f/0x780
__mutex_unlock_slowpath+0x330/0x540
owner_fn+0x9f/0xc0 [proxy_migrate_repro]
...
proxy_migrate_repro: donor woke on CPU0, task_cpu=0
proxy_migrate_repro: completed
Exclude blocked proxy donors from the warning. The proxy wakeup path
restores an executable placement before clearing the blocked state. |
| In the Linux kernel, the following vulnerability has been resolved:
drop_monitor: fix out-of-bounds write in reset_per_cpu_data()
In reset_per_cpu_data(), al is computed as:
al = sizeof(struct net_dm_alert_msg);
al += dm_hit_limit * sizeof(struct net_dm_drop_point);
al += sizeof(struct nlattr);
skb = genlmsg_new(al, GFP_KERNEL);
...
nla = nla_reserve(skb, NLA_UNSPEC, sizeof(struct net_dm_alert_msg));
...
msg = nla_data(nla);
memset(msg, 0, al);
Because al includes sizeof(struct nlattr) (the 4-byte attribute header),
genlmsg_new() allocates al bytes of tailroom starting at nla.
However, msg points to nla_data(nla), which is located
sizeof(struct nlattr) bytes past nla. Calling memset(msg, 0, al)
therefore writes al bytes starting from msg, exceeding the allocated
buffer by sizeof(struct nlattr) (4 bytes) and corrupting
skb_shared_info.
Fix this by letting al represent only the payload length, allocating
the skb with genlmsg_new(nla_total_size(al), GFP_KERNEL), and zeroing
al bytes from msg. |
| Stack-based buffer overflow in Microsoft Office Excel allows an unauthorized attacker to execute code over a network. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| A flaw was found in cifs-utils. This flaw allows an unprivileged local user to achieve privilege escalation. When a privileged service mounts a Common Internet File System (CIFS) share using a user-controlled credentials file, input values are not properly sanitized before being assembled into mount options. A local attacker can exploit this vulnerability to inject unauthorized mount options, allowing them to bypass permission checks and execute files with administrative (root) privileges. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: validate checksum_start before completing checksum
If a packet with bad checksum metadata gets into the ipv4 stack,
skb_checksum_help can corrupt the network header and cause a bunch of
mischief.
This was discovered and reported by Paulos, and has been reporoduced
by others independently since.
We really shouldn't allow such packets in, but as a defence
in depth measure, let's also check before we complete the checksum.
A more complete validation at input is forthcoming, but needs more work. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Houzez.co Houzez houzez allows Reflected XSS.This issue affects Houzez: from n/a through 4.4.0. |
| Incorrect Privilege Assignment vulnerability in Mitsubishi Electric GENESIS64 versions 10.97.3 and prior, ICONICS Suite versions 10.97.3 and prior, Hyper Historian versions 10.97.3 and prior, AnalytiX versions 10.97.3 and prior, MobileHMI 10.97.3 and prior, MC Works64 all versions, Mitsubishi Electric Iconics Digital Solutions GENESIS64 versions 10.97.3 and prior, ICONICS Suite versions 10.97.3 and prior, Hyper Historian versions 10.97.3 and prior, AnalytiX versions 10.97.3 and prior, and MobileHMI 10.97.3 and prior allows an attacker who can log in using the same administrator account for the affected products to launch and operate DCOM objects locally or remotely. During installation, the installers of the affected products unnecessarily grant default DCOM permissions to the administrator account of the affected products. Users with that administrator accounts can locally or remotely launch and operate DCOM objects that should require UAC elevation. As a result, the attacker may disclose, tamper with, destroy, or delete internal information, or cause the affected system to enter a denial-of-service (DoS) condition. |
| Weak Password Recovery Mechanism for Forgotten Password vulnerability in Mitsubishi Electric GENESIS versions 11.03 and prior, GENESIS64 versions 10.97.3 and prior, ICONICS Suite versions 10.97.3 and prior, Hyper Historian versions 10.97.3 and prior, AnalytiX versions 10.97.3 and prior, MobileHMI 10.97.3 and prior, IoTWorX 10.97.3 and prior, MC Works64 all versions, GENESIS32 all versions, BizViz all versions, Mitsubishi Electric Iconics Digital Solutions GENESIS versions 11.03 and prior, GENESIS64 versions 10.97.3 and prior, ICONICS Suite versions 10.97.3 and prior, Hyper Historian versions 10.97.3 and prior, AnalytiX versions 10.97.3 and prior, MobileHMI 10.97.3 and prior, IoTWorX 10.97.3 and prior, GENESIS32 all versions, and BizViz all versions allows an authenticated local user with administrative privileges to unlock the system by tampering with the management file that stores the challenge response. Administrators are able to read and write the management file. But the management file is protected by Windows. As a result, the attacker may disclose, tamper with, destroy, or delete internal information, or cause the affected system to enter a denial-of-service (DoS) condition. |
| Weak Password Recovery Mechanism for Forgotten Password vulnerability in Mitsubishi Electric GENESIS versions 11.03 and prior, GENESIS64 versions 10.97.3 and prior, ICONICS Suite versions 10.97.3 and prior, Hyper Historian versions 10.97.3 and prior, AnalytiX versions 10.97.3 and prior, MobileHMI 10.97.3 and prior, IoTWorX 10.97.3 and prior, MC Works64 all versions, GENESIS32 all versions, BizViz all versions, Mitsubishi Electric Iconics Digital Solutions GENESIS versions 11.03 and prior, GENESIS64 versions 10.97.3 and prior, ICONICS Suite versions 10.97.3 and prior, Hyper Historian versions 10.97.3 and prior, AnalytiX versions 10.97.3 and prior, MobileHMI 10.97.3 and prior, IoTWorX 10.97.3 and prior, GENESIS32 all versions, and BizViz all versions allows a remote attacker to unlock the system by obtaining the challenge response by some means. The challenge response used to unlock the system is common to all users and fixed. As a result, the attacker may disclose, tamper with, destroy, or delete internal information, or cause the affected system to enter a denial-of-service (DoS) condition. |
| A vulnerability has been found in Calix GigaSpire 26.1.0. The affected element is an unknown function of the file traceroute.cmd. The manipulation leads to denial of service. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The presence of this vulnerability remains uncertain at this time. The vendor explains: "After reviewing the researcher's videos, we repeated the test using his described setup: the traceroute cancel request was sent while a second client was connected to the EWI. The second client remained connected and was not interrupted, and we did not observe a forced logout, session invalidation, or loss of EWI availability." |
| A flaw has been found in Calix GigaSpire 26.1.0. Impacted is an unknown function of the file utilities_configurationsave.cgi of the component Web Management Interface. Executing a manipulation of the argument sessionKey can lead to denial of service. The attack can be launched remotely. The exploit has been published and may be used. The existence of this vulnerability is still disputed at present. The vendor explains: "We reproduced the reported request pattern. The observed delay results from expected input-timeout handling while the handler waits for input data. We did not observe a backend crash, resource exhaustion, service instability, or loss of EWI availability, and the interface remained accessible during and after testing." |
| The Lightweight Cookie Notice – Cookie Banner for Cookie Consent plugin for WordPress is vulnerable to Sensitive Information Exposure in all versions up to, and including, 1.19 This is due to the W3TC_DYNAMIC_SECURITY constant being hardcoded to a publicly known value. This makes it possible for unauthenticated attackers to know the W3 Total Cache mfunc security key, which when W3 Total Cache is installed may allow arbitrary PHP code injection. |
| The Theme My Login plugin for WordPress is vulnerable to privilege escalation via account takeover in versions up to, and including, 7.2.1. This is due to the plugin not properly validating a user's identity prior to updating their password. This makes it possible for unauthenticated attackers to change arbitrary user's passwords on multi-site setups in certain configurations. |
| The Tainacan plugin for WordPress is vulnerable to Directory Traversal in all versions up to, and including, 1.3.0 via the 'guid' parameter parameter. This makes it possible for authenticated attackers, with subscriber-level access and above, to read the contents of arbitrary files on the server, which can contain sensitive information. This vulnerability is exploitable only when the uploads/tainacan directory does not exist on the server, as this condition causes realpath() to return false, collapsing the base path to an empty string and rendering the containment check ineffective. |
