| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Russh is a Rust SSH client & server library. Prior to 0.62.4, an authenticated SSH client can cause a denial of service by sending a pty-req channel request with more than 130 terminal-mode records. The parser in russh/src/server/encrypted.rs stores terminal modes in a fixed 130-entry [(Pty::TTY_OP_END, 0); 130] array but continues increasing the mode count, then constructs an out-of-bounds slice and panics before the application pty_request handler runs. The panic terminates the server session task without causing memory corruption. This issue is fixed in version 0.62.4. |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote attacker to cause a denial of service due to an out-of-bounds read. |
| In the Linux kernel, the following vulnerability has been resolved:
binder: cache secctx size before release zeroes it
binder_transaction() bounds the scatter-gather buffer area with
sg_buf_end_offset and subtracts the aligned LSM context size because
the secctx is written at the tail of that area. The subtraction reads
lsmctx.len, but that field has already been cleared by the time the
line runs:
security_secid_to_secctx(secid, &lsmctx) /* lsmctx.len set */
lsmctx_aligned_size = ALIGN(lsmctx.len, sizeof(u64))
extra_buffers_size += lsmctx_aligned_size
...
security_release_secctx(&lsmctx) /* memset zeroes len */
...
sg_buf_end_offset = sg_buf_offset + extra_buffers_size
- ALIGN(lsmctx.len, sizeof(u64)) /* ALIGN(0,8) */
security_release_secctx() does memset(cp, 0, sizeof(*cp)), so lsmctx.len
reads back as 0 and the subtraction contributes nothing, leaving
sg_buf_end_offset too large by the aligned secctx size on every
transaction to a txn_security_ctx node.
Each BINDER_TYPE_PTR object then derives buf_left = sg_buf_end_offset -
sg_buf_offset as the sole upper bound on its copy, so the inflated end
offset lets the copy run into the bytes that already hold the secctx.
The aligned size must therefore be cached before release rather than
re-read from the now-cleared field. Fix by caching it in
lsmctx_aligned_size at function scope when it is first computed and
subtracting lsmctx_aligned_size instead of re-reading lsmctx.len after
release. Reuse the same value for the earlier buf_offset computation. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ife: require ETH_HLEN to be pullable in ife_decode()
ife decode may return after making only the outer IFE header and
metadata pullable. The caller then passes the decapsulated packet to
eth_type_trans(), which expects the inner Ethernet header to be
accessible from the linear data area.
With a malformed IFE frame, the inner Ethernet header may still be
shorter than ETH_HLEN in the linear area, which can lead to a crash in
the original code.
Fix this by extending the pull check in ife_decode() so that the inner
Ethernet header is also guaranteed to be pullable before returning. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SOF: ipc4-control: Validate notification payload size
Validate MODULE_NOTIFICATION payload length before reading
bytes/channel data in control update handling. |
| Stack-based buffer overflow in Windows Installer allows an authorized attacker to elevate privileges locally. |
| Zeroconf is a pure Python implementation of multicast DNS service discovery. Prior to 0.149.16, _read_character_string and _read_string in src/zeroconf/_protocol/incoming.py advanced self.offset by attacker-declared RDLENGTH without checking it against self._data_len, allowing unauthenticated hosts on the local link over UDP/5353 (224.0.0.251 / ff02::fb) to send a TXT, HINFO, or A/AAAA record with rdlength=65535 and seed DNSCache and ServiceInfo.properties with truncated, attacker-shaped key/value or address records. This issue is fixed in version 0.149.16. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: xfrm_interface: require CAP_NET_ADMIN in the device netns for changelink
xfrmi_changelink() operates on at most two netns, dev_net(dev) and the
interface link netns xi->net. They differ once the device is created in
or moved to a netns other than the one the request runs in. The rtnl
changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a
caller privileged there but not in xi->net can rewrite an interface that
lives in xi->net.
Gate xfrmi_changelink() on rtnl_dev_link_net_capable() at its top,
before any attribute is parsed. |
| Heap-based buffer overflow in Windows Installer allows an authorized attacker to elevate privileges locally. |
| D-Link DWR-M961 devices with hardware version C1 and software version 1.1.2_C1_202602110044 contain a buffer overflow vulnerability in the app.cgi interface. A remote attacker can write an overly long string to the netAcc.addlist[].name field and execute arbitrary commands by crafting a specific payload, or cause the device to crash. |
| Capstone is a disassembly framework. Prior to version 6.0.0-Alpha9, Capstone's public `cs_insn_name()` API forwards caller-supplied instruction IDs directly to the selected architecture backend. Most backends validate the ID before indexing instruction-name tables, but the M68K and RISCV backends have missing or incomplete bounds checks. On a Capstone handle opened for M68K or RISCV, a caller-controlled invalid instruction ID can trigger an out-of-bounds read and crash the process. The demonstrated impact is availability loss in applications or bindings that expose instruction-name lookup to untrusted IDs. No code execution or data disclosure was demonstrated. Version 6.0.0-Alpha9 patches the issue. |
| Zephyr's 6LoWPAN IP Header Compression (IPHC) uncompression code contains an out-of-bounds read in get_ihpc_inlined_size() (subsys/net/ip/6lo.c). The destination inline size is looked up in da_inline_size_table, which has 13 entries, using an index built from the M, DAC and DAM bits of the received IPHC dispatch word (iphc & NET_6LO_IPHC_DA_MASK, a 4-bit value of 0-15). The reserved combinations 13, 14 and 15 are not bounds-checked and read past the end of the table.
The iphc word is taken directly from the received frame, and get_ihpc_inlined_size() is reached on every inbound 6LoWPAN frame via net_6lo_uncompress() from the 802.15.4 receive path (subsys/net/l2/ieee802154/ieee802154_6lo.c and ieee802154_6lo_fragment.c). An unauthenticated attacker on the radio/adjacent link can therefore craft a frame whose destination addressing-mode nibble selects an out-of-range index, with no privileges or user interaction.
The out-of-bounds value becomes the computed inline_size, which then drives header reconstruction before the buffer-length check: it is used to dereference *(pkt->buffer->data + sizeof(iphc) + inline_size) and to compute a size_t diff that can underflow, leading to a further out-of-bounds read of the packet buffer and malformed uncompression. The practical impact is a radio-triggerable out-of-bounds read / denial-of-service on the receiver; the leaked byte is not returned to the attacker. The fix rejects any destination index beyond the table, aborting processing of the malformed frame. |
| The Google Cloud Secret Manager secrets backend in Apache Airflow's Google provider never applied the team scope when resolving Connections and Variables: the caller's `team_name` was accepted by the backend but dropped at the internal call boundary, so every lookup resolved against the team-agnostic secret name. In a deployment running multi-team mode with this backend, a task or Dag belonging to one team resolved another team's Connection or Variable, obtaining its credentials in full. No unusual configuration is required beyond enabling multi-team mode and using this backend. Users are advised to upgrade to apache-airflow-providers-google 22.3.0 or later, which builds and applies the team-scoped secret name. |
| OP-TEE OS through 4.10.0, fixed in commit 7b8b494, contains a buffer underwrite vulnerability in the RSA NOPAD encrypt and decrypt operations within the mbedTLS software backend and SE050 hardware driver that allows a malicious Trusted Application to corrupt secure-world heap memory by supplying an input length exceeding the RSA modulus size. When src_len exceeds rsa_len, the subtraction expression wraps to a large unsigned value, causing a subsequent memcpy to write attacker-controlled data before the destination buffer in S-EL1 secure-world heap memory. |
| Numeric truncation error in Windows DNS allows an authorized attacker to elevate privileges locally. |
| Heap-based buffer overflow in Windows DNS allows an authorized attacker to elevate privileges locally. |
| Integer overflow or wraparound in Windows DNS allows an authorized attacker to elevate privileges locally. |
| In the Linux kernel, the following vulnerability has been resolved:
geneve: gate GRO hint in geneve_gro_complete() on gs->gro_hint
geneve_gro_receive() reads the GRO hint through geneve_sk_gro_hint_off(),
which honours it only when the socket enabled IFLA_GENEVE_GRO_HINT
(gs->gro_hint). geneve_gro_complete() instead calls the low-level
geneve_opt_gro_hint_off() and acts on the hint unconditionally.
On a tunnel without the hint, receive aggregates the frames as plain
ETH_P_TEB while complete still honours an attacker-supplied hint option: it
inflates gh_len by gro_hint->nested_hdr_len (u8) and redirects the dispatch
type, so the inner gro_complete handler runs at nhoff + gh_len, an offset
receive never pulled nor validated, reading out of bounds of the skb head:
BUG: KASAN: slab-out-of-bounds in ipv6_gro_complete (net/ipv6/ip6_offload.c:196)
Read of size 1 at addr ffff88800fe91980 by task exploit/153
ipv6_gro_complete (net/ipv6/ip6_offload.c:196)
geneve_gro_complete (drivers/net/geneve.c:965)
udp_gro_complete (net/ipv4/udp_offload.c:940)
inet_gro_complete (net/ipv4/af_inet.c:1621)
__gro_flush (net/core/gro.c:306)
Gate the complete path on gs->gro_hint too via geneve_sk_gro_hint_off(), so
both paths agree. Tunnels that enable the hint are unaffected. |
| jupyterlab is an extensible environment for interactive and reproducible computing, based on the Jupyter Notebook Architecture. From 4.5.0 until 4.5.10 and 4.6.2, in jupyterlab/extensions/manager.py and jupyterlab/extensions/pypi.py, JupyterLab's PyPI extension manager enforces blocked_extensions_uris by comparing requested install names to blocklist entries with custom normalization that is weaker than PyPI package-name canonicalization. An authenticated user can request a PyPI-equivalent spelling such as JupyterLab.Git for a blocklisted package such as jupyterlab-git, and JupyterLab accepts the install request even though pip resolves the variant to the same package. Security impact requires an allowlist or blocklist intended to restrict package installation, the PyPI Extension Manager, and kernels and terminals that are disabled or delegated to remote hosts. The bypass lets an authenticated user install a prohibited extension, defeat integrity restrictions, and affect availability without gaining new read access. This issue is fixed in versions 4.5.10 and 4.6.2. |
| In the Linux kernel, the following vulnerability has been resolved:
net: enetc: check the number of BDs needed for xdp_frame
The size of xdp_redirect_arr array is ENETC_MAX_SKB_FRAGS. However, the
number of fragments contained in xdp_frame may be greater than or equal
to ENETC_MAX_SKB_FRAGS, which will cause the access to xdp_redirect_arr
to be out of bounds. |
