| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet-tcp: check INIT_FAILED before nvmet_req_uninit in digest error path
In nvmet_tcp_try_recv_ddgst(), when a data digest mismatch is detected,
nvmet_req_uninit() is called unconditionally. However, if the command
arrived via the nvmet_tcp_handle_req_failure() path, nvmet_req_init()
had returned false and percpu_ref_tryget_live() was never executed. The
unconditional percpu_ref_put() inside nvmet_req_uninit() then causes a
refcount underflow, leading to a WARNING in
percpu_ref_switch_to_atomic_rcu, a use-after-free diagnostic, and
eventually a permanent workqueue deadlock.
Check cmd->flags & NVMET_TCP_F_INIT_FAILED before calling
nvmet_req_uninit(), matching the existing pattern in
nvmet_tcp_execute_request(). |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet-tcp: Fix potential UAF when ddgst mismatch
Shivam Kumar found via vulnerability testing:
When data digest is enabled on an NVMe/TCP connection and a digest
mismatch occurs on a non-final H2C_DATA PDU during an R2T-based
data transfer, the digest error handler in nvmet_tcp_try_recv_ddgst()
calls nvmet_req_uninit() — which performs percpu_ref_put() on the
submission queue — but does NOT mark the command as completed. It
does not set cqe->status, does not modify rbytes_done, and does not
clear any flag. When the subsequent fatal error triggers queue
teardown, nvmet_tcp_uninit_data_in_cmds() iterates all commands,
checks nvmet_tcp_need_data_in() for each one, and finds that the
already-uninited command still appears to need data (because
rbytes_done < transfer_len and cqe->status == 0). It therefore calls
nvmet_req_uninit() a second time on the same command — a double
percpu_ref_put against a single percpu_ref_get. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: fix OOB reads in is_ap_in_tkip() IE loop
The loop in is_ap_in_tkip() iterates over IEs without verifying that
enough bytes remain before dereferencing the IE header or its payload:
- pIE->element_id and pIE->length are read without checking that
i + sizeof(*pIE) <= ie_length, so a truncated IE at the end of the
buffer causes an OOB read.
- For WLAN_EID_VENDOR_SPECIFIC the code compares pIE->data + 12,
which requires pIE->length >= 16. For WLAN_EID_RSN it compares
pIE->data + 8, requiring pIE->length >= 12. Neither requirement
is checked.
Add the missing IE header and payload bounds checks and guard each
data access with an explicit pIE->length minimum, matching the
pattern established in update_beacon_info(). |
| IBM MQ 9.2.0.0 through 9.2.0.44 LTS, 9.3.0.0 through 9.3.0.42 LTS, 9.4.0.0 through 9.4.0.26 LTS, 9.4.0.0 through 9.4.5.1 CD, and 10.0.0.0 through 10.0.0.5 LTS and CD could allow an authenticated attacker to obtain sensitive information or cause a denial of service due to improper validation of message selection parameters. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: mediate the implicit connect of TCP fast open sendmsg
sendmsg()/sendto() with MSG_FASTOPEN is a combination of connect(2) and
write(2): it opens the connection in the SYN. apparmor_socket_sendmsg()
only checks AA_MAY_SEND, so a profile that grants send but denies connect
lets a confined task open an outbound TCP/MPTCP connection that connect(2)
would have refused, bypassing connect mediation.
Mediate the implicit connect when MSG_FASTOPEN is set and a destination
is supplied. Add it to apparmor_socket_sendmsg() (not the shared
aa_sock_msg_perm() helper, which recvmsg also uses) and call aa_sk_perm()
directly, mirroring the selinux and tomoyo fixes. sk_is_tcp() does not
cover MPTCP fast open, so the SOCK_STREAM/IPPROTO_MPTCP arm is explicit. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: tp_meter: restrict number of unacked list entries
When the unacked_list is unbound, an attacker could send messages with
small lengths and appropriated seqno + gaps to force the receiver to
allocate more and more unacked_list entries. And the end either causing an
out-of-memory situation or increase the management overhead for the (large)
list that significant portions of CPU cycles are wasted in searching
through the list.
When limiting the list to a specific number, it is important to still
correctly add a new entry to the list. But if the list became larger than
the limit, the last entry of the list (with the highest seqno) must be
dropped to still allow the earlier seqnos to finish and therefore to
continue the process. Otherwise, the process might get stuck with too high
seqnos which are not handled by batadv_tp_ack_unordered(). |
| The Email Marketing 4Dem WordPress plugin through 2.0.5 does not perform authorization or capability checks on several of its AJAX actions and REST routes, allowing unauthenticated users to disclose the Email Marketing 4Dem WordPress plugin through 2.0.5's stored configuration and data and to modify its stored settings. |
| The Checkout Files Upload for WooCommerce WordPress plugin before 2.4.1 does not verify that a file uploaded at checkout is really one of its allowed image types, and serves stored uploads inline using their detected content type, allowing unauthenticated users to upload an HTML file disguised as an image that executes JavaScript in the browser of a shop manager or administrator who opens it from the order screen.
This is a regression of CVE-2025-4212, reintroduced in 2.4.0. |
| The Social Viral Downloader WordPress plugin through 2.0.3 does not have authorisation or nonce checks on a log deletion action available to unauthenticated users, which could allow them to delete the Social Viral Downloader WordPress plugin through 2.0.3's entire download log. |
| The MP3 Audio Player – Music Player, Podcast Player & Radio by Sonaar plugin for WordPress is vulnerable to Stored Cross-Site Scripting via Shortcode Attributes in all versions up to, and including, 5.14.2 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. WordPress's save-time wp_kses_post does not neutralize the payload because the attack is delivered via shortcode attributes rather than raw HTML in post content, allowing the unescaped values to survive to render time. |
| The WP Booking System – Booking Calendar plugin for WordPress is vulnerable to time-based SQL Injection via the 'current_month' parameter in all versions up to, and including, 2.1.0.1 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers, with subscriber-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. This is a regression vulnerability — a capability check introduced in versions 2.0.19.11–2.0.19.14 to address CVE-2024-50425 was removed in version 2.1, meaning any authenticated subscriber-level account can reach the vulnerable handler with no nonce validation required. |
| Unauthenticated Cross Site Scripting (XSS) in Additional Order Filters for WooCommerce <= 1.24 versions. |
| Unauthenticated PHP Object Injection in WineShop <= 3.20 versions. |
| The Mobile builder WordPress plugin through 1.4.2 does not properly restrict which user meta keys a logged-in user can update through one of its REST routes, allowing any user with a self-registered account, such as a customer, to grant themselves the administrator role. |
| The Mobile builder WordPress plugin through 1.4.2 does not sanitise and escape a parameter before using it in a SQL statement, allowing unauthenticated users to perform SQL injection attacks. |
| A use-after-free flaw was found in mutter in the Wayland color-management ICC image-description path. A local attacker who can run a malicious Wayland client can destroy a wp_image_description_v1 resource while an asynchronous ICC file read is still in progress. When the read completes, the compositor uses the freed wl_resource, writes into freed memory, and frees a pointer derived from that memory. This can crash the GNOME session and may allow arbitrary code execution within the compositor process. |
| In the Linux kernel, the following vulnerability has been resolved:
fuse: don't BUG when the copy buffer is exhausted
fuse_copy_fill() hits BUG_ON(!err) once the iterator backing the copy
runs out of pages. Over io-uring the amount copied is not bounded by the
payload buffer the server registered, so an unprivileged user can drain
the iterator and panic the host - mount a FUSE filesystem with small
payload buffers, then setxattr() a larger value:
kernel BUG at fs/fuse/dev.c:1064!
Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI
CPU: 1 UID: 0 PID: 148 Comm: exploit Not tainted 7.3.0-rc1 #2
RIP: 0010:fuse_copy_fill (fs/fuse/dev.c:1033)
Call Trace:
<TASK>
fuse_copy_args (fs/fuse/dev.c:1354 fs/fuse/dev.c:1380)
fuse_uring_args_to_ring (fs/fuse/dev_uring.c:891)
fuse_uring_prepare_send (fs/fuse/dev_uring.c:940 fs/fuse/dev_uring.c:1057)
fuse_uring_send_in_task (fs/fuse/dev_uring.c:1745)
tctx_task_work_run (io_uring/tw.c:96)
tctx_task_work (io_uring/tw.c:133)
task_work_run (kernel/task_work.c:233)
io_run_task_work (io_uring/tw.h:84)
io_cqring_wait (io_uring/wait.c:278)
__do_sys_io_uring_enter (io_uring/io_uring.c:2676)
do_syscall_64 (arch/x86/entry/syscall_64.c:61)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
The reply path can drain it the same way, via the server-supplied
payload_sz in fuse_uring_copy_from_ring().
Return -EIO instead. All three fuse_copy_fill() callers already
propagate the error. |
| In affected versions of Octopus Server, a user with permission to edit team scoped roles could escalate their privileges to deploy to projects and environments that they were not authorised to so. |
| The fix for CVE-2026-23903 https://shiro.apache.org/security-reports.html#cve_2026_23903 was incomplete for manually-created ShiroFilterFactoryBean, which still matched paths case-sensitively by default.
This issue affects Apache Shiro version 3.0.1, only when ShiroFilterFactoryBean is created manually by the application and static files are served from a case-insensitive filesystem.
Applications that let Shiro Spring (Boot) Starter create the bean are not affected.
Mitigation: Upgrade to version 3.0.2 or later, which fixes the issue.
Alternatively, call setCaseInsensitive(true) on the ShiroFilterFactoryBean. |
| IBM MQ 9.2.0.0 through 9.2.0.44 LTS, 9.3.0.0 through 9.3.0.42 LTS, 9.4.0.0 through 9.4.0.26 LTS, 9.4.0.0 through 9.4.5.1 CD, and 10.0.0.0 through 10.0.0.5 LTS and CD Managed File Transfer could allow an authenticated attacker to obtain sensitive information or cause a denial of service due to improper restriction of XML external entity references in command queue processing. |