| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Untrusted pointer dereference in Windows Storage Spaces Controller allows an unauthorized attacker to execute code over a network. |
| In the Linux kernel, the following vulnerability has been resolved:
net/9p/usbg: Fix use-after-free in disable_usb9pfs()
disable_usb9pfs() frees the IN and OUT usb_request objects before it
disables the corresponding endpoints. If either request is still queued,
the later usb_ep_disable() call cancels the endpoint queue and the UDC
driver can still access the already freed request.
With dummy_hcd and KASAN, this is reproducible by queueing the OUT
request and then disconnecting the configfs gadget:
BUG: KASAN: slab-use-after-free in dummy_disable+0x2b4/0x300
Read of size 8 at addr ffff888009702400 by task sh/1
usb_ep_disable+0x8e/0x1f0
usb9pfs_func_unbind+0x193/0x350
gadget_dev_desc_UDC_store+0x135/0x280
dummy_free_request() also warns because the request is freed while its
queue entry is still linked.
Disable both endpoints before freeing the request objects. This lets
usb_ep_disable() cancel any queued transfers and invoke the completion
callback while the request storage is still valid. The request objects
are then freed only after they have been removed from the endpoint
queues. |
| In the Linux kernel, the following vulnerability has been resolved:
ptp: fix use-after-free in extts_fifo_show() reading tsevqs unlocked
extts_fifo_show() walks ptp->tsevqs with list_count_nodes() and then
list_first_entry() without holding ptp->tsevqs_lock, the spinlock that
"protects tsevqs from concurrent access". Every other accessor of the
list honours it: ptp_open() (list_add_tail), ptp_release() (list_del
followed by kfree of the per-fd queue), ptp_clock_release() and
ptp_clock_event() all take tsevqs_lock. extts_fifo_show() is the only
one that does not.
A per-fd timestamp queue is appended to tsevqs on open("/dev/ptpN") and
removed and freed on close(), both under tsevqs_lock:
scoped_guard(spinlock_irq, &ptp->tsevqs_lock)
list_del(&queue->qlist);
bitmap_free(queue->mask);
kfree(queue);
So a read of /sys/class/ptp/ptpN/fifo running concurrently with a
close() of a /dev/ptpN fd can have list_count_nodes() walk into the
queue that close() is removing and freeing, dereferencing freed memory
(use-after-free) or a poisoned list pointer.
Take tsevqs_lock around the list walk. The fifo only ever draws from the
first queue, which is the registration-time queue created in
ptp_clock_register() and freed only in ptp_clock_release(); that cannot
run while the sysfs attribute is being read, so the dequeue from
queue->buf under queue->lock may stay outside tsevqs_lock and the lock
order is unchanged. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: target: Fix demo-mode dynamic ACL dev-entry UAF vs LUN teardown
A demo-mode (generate_node_acls=1) login that allocates a dynamic NodeACL
populates that ACL's per-LUN dev entries in core_tpg_add_node_to_devs()
*before* the ACL is linked onto tpg->acl_node_list by
target_add_node_acl():
core_tpg_check_initiator_node_acl():
...
core_tpg_add_node_to_devs(acl, tpg, NULL); /* builds deves */
target_add_node_acl(acl); /* only now listed */
The LUN teardown sweep, core_clear_lun_from_tpg(), enumerates only
tpg->acl_node_list, so a dev entry whose ACL is still in the window above
is invisible to the sweep and is never disabled. It is left on the
se_lun->lun_deve_list after core_tpg_remove_lun() frees the se_lun; when
the same unpacked_lun is later re-added and the se_lun is reallocated at
the same address, the stale dev entry is rediscovered by
target_nacl_find_deve() and core_enable_device_list_for_node() corrupts
lun_deve_list:
BUG: KASAN: slab-use-after-free ...
core_enable_device_list_for_node+0x5ce/0x880
core_tpg_add_node_to_devs+0x169/0x190
core_dev_add_lun+0x146/0x190
target_fabric_port_link+0xe9/0x1b0
configfs_symlink+0x381/0xae0
__x64_sys_symlink+0x55/0x80
The demo-mode login path that drives the ACL/dev-entry creation is
reachable by an unauthenticated initiator; the colliding LUN add/remove is
a local configfs operation.
Commit 49cb77e297dc ("target: Avoid mappedlun symlink creation during lun
shutdown") introduced se_lun->lun_shutdown and guarded the *explicit* ACL
MappedLUN path (target_fabric_mappedlun_link()), but the demo-mode
automatic path, core_tpg_add_node_to_devs() ->
core_enable_device_list_for_node(), was never given the equivalent guard,
and the publish-after-populate ordering in
core_tpg_check_initiator_node_acl() was left unchanged.
Fix it in three cooperating parts:
1) Publish the dynamic NodeACL onto acl_node_list *before* creating its
dev entries, so the teardown sweep can observe them.
2) Refuse to attach a dev entry to an se_lun that is shutting down,
checked under nacl->lun_entry_mutex -- the same lock the sweep takes --
so once the sweep has passed an ACL any later enable for that LUN
observes lun_shutdown and skips it.
3) In core_enable_device_list_for_node(), insert the new dev entry onto
lun->lun_deve_list while still holding nacl->lun_entry_mutex, in both
the replace and the new-entry branch. Previously the entry was added
to nacl->lun_entry_hlist under the mutex but to lun->lun_deve_list only
after dropping it; with the ACL now published early, the sweep could
take the mutex in that gap, find the entry on the hlist,
core_disable_device_list_for_node() it (list_del() on the not-yet-
linked lun_link succeeds and the entry is freed), and then the enable
would list_add_tail() the freed entry back onto lun_deve_list. Linking
both lists under the mutex makes enable and the sweep mutually
exclusive, closing that window.
core_tpg_add_node_to_devs() already ignores the return value of
core_enable_device_list_for_node(), so a shutting-down LUN is simply
skipped. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/drm_crtc: ensure dma_fence_ops remain valid during device unbind
In [1], sashiko reported the following issue:
=== snip ===
Looking at how these fences are managed, drm_crtc_create_fence()
creates a dma_fence without taking a reference to the drm_device or
drm_crtc. Because the sync_file framework exposes this fence to
userspace, the fence can outlive the CRTC.
The dma_fence contract requires that data accessed by dma_fence_ops
(like get_driver_name) must remain valid for an RCU grace period after
the fence is signaled. However, drm_crtc_cleanup() and the subsequent
freeing of the device do not wait for an RCU grace period via
synchronize_rcu().
If userspace calls ioctl(SYNC_IOC_FILE_INFO) concurrently with a device
hot-unplug:
CPU1 (Userspace)
sync_file_get_name()
ops = rcu_dereference(fence->ops);
if (!dma_fence_test_signaled_flag())
// Preempted or delayed here
CPU2 (Driver Teardown)
Signals the fence (setting fence->ops = NULL)
Destroys and frees the CRTC without waiting for an RCU grace period
CPU1 (Resumes)
ops->get_driver_name(fence) -> drm_crtc_fence_get_driver_name()
crtc = fence_to_crtc(fence); // Casts to the freed CRTC
return crtc->dev->driver->name; // Use-after-free
...
Does the CRTC or DRM device need to be kept alive for the RCU grace
period, or should the fence hold a proper reference to prevent the
use-after-free when get_driver_name() and get_timeline_name() access
the freed CRTC structure?
=== snap ===
I believe this to be a correct observation and this patch implements
the suggestion of waiting for an RCU grace period before proceeding
with destruction of the drm_crtc, so that get_driver_name() and
get_timeline_name() can still work. |
| A use-after-free in Node.js HTTP/2 stream teardown can leak response memory, including the contents of other connections' response buffers, to a peer. When a stream is torn down while a write is still backpressured, for example by a peer `RST_STREAM` or by the server's own per-stream timeout destroying the stream, the stream's response buffer is freed but a reference to it is still used, so freed or unrelated heap memory is written to the socket instead of the intended response. On Node.js 26.x and 24.x the teardown can be driven purely by a remote peer once the window-size change from 26.9.0 and 24.22.0 is present, and on all supported lines the same defect is reachable through an application-initiated teardown such as a per-stream idle timeout. This vulnerability affects Node.js 26.x, 24.x, and 22.x. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: cache the mount context for dentry lock callbacks
ocfs2_drop_dentry_lock() drops the inode reference before releasing the
DENTRY lock. This lets inode eviction release the local inode and open
locks before a remote unlink can proceed past the DENTRY lock.
A DLM callback can still arrive before the DENTRY lock has been dropped.
ocfs2_get_dentry_osb() obtains the mount context through dl_inode->i_sb,
which can access a freed inode when the downconvert thread drops the
last inode reference in its post-unlock callback:
Downconvert thread DLM callback thread
------------------ -------------------
ocfs2_process_blocked_lock()
ocfs2_dentry_post_unlock()
ocfs2_dentry_lock_put()
ocfs2_drop_dentry_lock()
iput(dl->dl_inode)
[inode reclaimed after RCU]
ocfs2_blocking_ast()
ocfs2_get_dentry_osb()
dl->dl_inode->i_sb
ocfs2_simple_drop_lockres()
Store the mount context in the DENTRY lock resource's l_priv field and use
the default mount-context lookup. Recover the containing dentry lock with
container_of(), as already done for refcount locks, and remove
ocfs2_get_dentry_osb(). ocfs2_dismount_volume() shuts down the DLM before
freeing the mount context, so callbacks can use it without accessing the
inode. Preserve the existing iput-before-unlock order to avoid delaying
local inode and open lock release until after the DENTRY lock is released. |
| Use after free in Windows Smart Card allows an authorized attacker to elevate privileges locally. |
| Untrusted pointer dereference in Windows Graphics Kernel allows an authorized attacker to elevate privileges locally. |
| Untrusted pointer dereference in Windows Graphics Kernel allows an authorized attacker to elevate privileges locally. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: raw: fix use-after-free in rawv6_send_hdrinc()
rawv6_send_hdrinc() caches the route before handing the skb to
l3mdev_ip6_out(). The VRF output path may replace skb->dst and release
the original route, leaving the cached pointer stale.
The function later dereferences that pointer for statistics accounting
and as the output device passed to NF_HOOK(). Its RCU read-side critical
section starts after l3mdev_ip6_out(), so it cannot prevent the old route
from being reclaimed in between.
Reload the route from the current skb destination after
l3mdev_ip6_out() returns.
KASAN reports a slab-use-after-free in rawv6_sendmsg(), with the route
allocated by ip6_dst_alloc(), freed by dst_destroy() from rcu_core(), and
the related RCU callback queued from vrf_l3_out(). |
| In the Linux kernel, the following vulnerability has been resolved:
net/9p/usbg: clear stale client pointer on close
p9_usbg_close() tears down the client transport, but usb9pfs keeps
using usb9pfs->client from asynchronous TX and RX completion handlers.
A late completion can therefore dereference a client that has already
been freed during mount teardown.
Clear usb9pfs->client under usb9pfs->lock when closing the transport,
detach any pending TX request from in_req->context, and make the TX/RX
completion handlers bail out once the transport has been detached. This
keeps late completions from touching a freed or rebound p9_client. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: retry inexact policy lookup after node reinsertion
An inexact policy lookup first records pointers to candidate hlist heads
and then traverses the lists. A concurrent policy insertion can merge
inexact tree nodes between those operations:
lookup policy insertion
------ ----------------
find inexact candidates
save obsolete hlist head
write_seqcount_begin(&bin->count)
merge inexact tree nodes
hlist_del_rcu(&policy->bydst)
reinsert policy->bydst in survivor
write_seqcount_end(&bin->count)
evaluate saved candidate list
miss the moved policy
The merge immediately reinserts the same hlist node into the surviving
tree node. RCU keeps the policy alive, but it does not provide a
consistent view while its list node is moved. A lookup that selected the
obsolete list can observe it empty. A lookup already traversing a moved
policy can instead follow the next pointer rewritten by the reinsertion.
Either case can return an incorrect IPsec policy result.
The per-bin sequence counter already brackets calls to
xfrm_policy_inexact_insert_node(), including node merges. The read side,
however, currently validates the counter only while searching an
individual rb-tree. A successful search returns without validation, and
the later candidate-list traversal is outside that read-side section.
Snapshot the per-bin sequence before discovering candidate heads and
validate it after evaluating all candidate lists. Retry the lookup if
the inexact policy tree changes while it is being searched. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/filemap: read mapping->a_ops->free_folio under i_lock
memory_failure() -> ... -> filemap_remove_folio() can read mapping->a_ops
after the inode has been freed. Once the folio is deleted from the
pagecache it no longer pins the mapping, so after i_lock is dropped
e.g., a concurrent final iput() can evict and free the inode before
filemap_free_folio() looks up mapping->a_ops->free_folio.
Most callers hold a reference on the inode, but not all.
Documentation/filesystems/vfs.rst explicitly states that ->free_folio()
must not assume the original address_space mapping still exists.
Fix it by loading ->free_folio while i_lock is still held, similar to
what folio_unmap_invalidate() does.
Inline filemap_free_folio() into its remaining caller such that
delete_from_page_cache_batch() also just loads the callback before
dropping the i_lock.
The bug was found by code inspection and has not been reproduced.
Fix generated by an LLM and sent by Josef Bacik in private.
[ david: get rid of filemap_free_folio() entirely; improve patch description ] |
| In the Linux kernel, the following vulnerability has been resolved:
HID: mcp2221: always initialize and cancel init_work
The writable gpio_mode_enforce parameter can change between probe and
remove.
If it changes from false to true after probe, remove skips cancellation
of init_work. Pending or running work can then access devm-managed
driver state after teardown. Changing it from true to false can make
remove cancel an uninitialized delayed work item.
Initialize init_work whenever IIO is reachable and cancel it
unconditionally on remove. Keep the parameter check only for scheduling
the initialization.
The false-to-true cancellation gap was previously reported by Sashiko.
We also encountered this issue during our static-analysis research. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: reload TDLS header pointer after skb_linearize()
ieee80211_process_tdls_channel_switch() sets tf = skb->data before it
calls skb_linearize(), and reads tf->action_code afterwards.
ieee80211_rx_h_data() queues TDLS channel switch requests and
responses to the interface after pulling only
offsetof(struct ieee80211_tdls_data, u) bytes, so the skb can still be
non-linear when the interface work handles it. Drivers that build
paged RX skbs do this for every frame that does not fit into the skb
head, e.g. iwlwifi (mvm), which is also the only mac80211 driver
that sets NL80211_FEATURE_TDLS_CHANNEL_SWITCH. If the remaining data
does not fit into the tailroom, skb_linearize() moves the data to a
new head and frees the old one, and the action code is then read from
freed memory. Depending on what that memory holds by then, the frame
is handled as before or ends in the WARN_ON_ONCE() of the default
case.
The frame only has to be a data frame with the TDLS ethertype from an
authorized peer, e.g. relayed by the AP from another station in the
BSS; the read happens before the sender is checked to be a TDLS peer.
Load tf after skb_linearize(), as the request and response handlers
already do.
Found by static analysis tool CodeQL. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Take SRCU in kvm_zap_gfn_range()
kvm_zap_gfn_range() walks memslots and rmaps and may drop mmu_lock to
reschedule. Callers that do not already hold kvm->srcu (or slots_lock)
can race with memslot deletion: synchronize_srcu_expedited() does not
wait, kvm_free_memslot() frees the old slot and its rmap, and the zap
resumes on freed memory.
The VFIO noncoherent-DMA path hits this by zapping the entire GPA
space without SRCU. KASAN reported:
BUG: KASAN: vmalloc-out-of-bounds in slot_rmap_walk_next+0x82/0x1c0
Read of size 8 at addr ffffc900005c1008
Call Trace:
slot_rmap_walk_next+0x82/0x1c0
__kvm_rmap_zap_gfn_range+0x17a/0x280
kvm_zap_gfn_range+0x2a6/0x6a0
kvm_vfio_set_attr+0x576/0x770
kvm_device_ioctl+0x1ff/0x3b0
Take SRCU inside kvm_zap_gfn_range() so every caller is covered.
Nesting with an existing kvm->srcu critical section is fine; the
helper uses a local index. Drop the now-redundant SRCU pair from
__kvm_set_or_clear_apicv_inhibit(). |
| In the Linux kernel, the following vulnerability has been resolved:
SUNRPC: trace an accepted transport before publishing it
svc_handle_xprt() publishes a newly accepted transport before tracing
it. svc_add_new_temp_xprt() places the transport on sv_tempsocks and
clears XPT_BUSY, so another nfsd thread can dequeue it at once. If the
peer has already closed the connection, that thread runs
svc_delete_xprt(), which drops the list reference, the only reference
the new transport holds. trace_svc_xprt_accept() then reads the
transport's addresses and network namespace from freed memory.
Before publication the accepting thread owns the transport
exclusively: XPT_BUSY is still set from svc_xprt_init() and the
transport is on no list. Emit the tracepoint there.
[ cel: trace before publication instead of taking an extra reference ] |
| In the Linux kernel, the following vulnerability has been resolved:
sunrpc: pin gss module across auth_domain RCU free
A gss auth_domain stores a raw pointer to svcauthops_gss in
dom->flavour, and its release queues svcauth_gss_domain_release_rcu()
via call_rcu(). Both live in auth_rpcgss.ko text, and nothing pins the
module while a domain referencing it is reachable. rmmod auth_rpcgss
can therefore unmap that text while an NFSD export still holds a
reference to the domain.
The export cache is one such holder. When the export is finally
released, the domain reference drops from module text:
svc_export_put()
auth_domain_put(exp->ex_client)
auth_domain_release()
dom->flavour->domain_release(dom) /* into module text */
svcauth_gss_domain_release()
call_rcu(&dom->rcu_head,
svcauth_gss_domain_release_rcu)
Once auth_rpcgss is unloaded, the domain_release call lands in
unmapped memory. The rcu_barrier() in exit_rpcsec_gss() does not
help: it waits only for callbacks already queued, and this one is
not queued until the export goes away.
NFSD's NFSv4 objects import symbols from auth_rpcgss.ko, so only a
server built without CONFIG_NFSD_V4 can unload auth_rpcgss while
exports still name a gss domain.
Take a module reference in svcauth_gss_register_pseudoflavor() before
publishing the domain and drop it at the end of
svcauth_gss_domain_release_rcu(). The rcu_barrier() then holds the
module image until this callback has returned.
[ cel: rewrote description ] |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: Don't complete a cld upcall the daemon has not read
cld_pipe_downcall() matches a reply to its upcall on the xid alone.
A write that arrives before the daemon has read that upcall
completes __cld_pipe_upcall() while its struct rpc_pipe_msg is still
queued on the pipe. The waiter returns, its stack frame goes away,
and the pipe keeps a list_head that points into it. The next
rpc_queue_upcall() walks that pointer:
BUG: KASAN: vmalloc-out-of-bounds in __list_add_valid_or_report
Read of size 8 at addr ffffc90007027950 by task syz.0.96/13066
__list_add_valid_or_report+0x6a/0x130
rpc_queue_upcall
cld_pipe_upcall
nfsd4_cld_grace_start
nfsd4_cld_tracking_init
The pipe is mode 0600 in rpc_pipefs, so the trigger is a broken or
hostile nfsdcld rather than an unprivileged task.
Record whether the daemon has consumed the whole message and
complete only when it has. cld_pipe_destroy_msg() runs on every path
by which the pipe releases a message, so it can maintain that flag
under cn_lock. nfsdcld sends its -EINPROGRESS downcalls only after
reading the upcall, so the new check does not break the GraceStart
record stream. |