Search Results (4004 CVEs found)

CVE Vendors Products Updated CVSS v3.1
CVE-2026-93916 1 Watchguard 1 Dimension 2026-11-20 N/A
An insufficient session expiration vulnerability in WatchGuard Dimension's administrator session management allows an attacker holding a valid Super Administrator WebUI session to retain full Super Administrator privileges after that account has been downgraded or deleted by another administrator.
CVE-2026-132283 1 Directus 1 Directus 2026-11-20 5.3 Medium
A vulnerability was identified in Directus up to 12.7.0. This issue affects the function AuthenticationService.refresh of the file api/src/services/authentication.ts of the component Authentication Service. Such manipulation leads to session expiration. The attack can be launched remotely. The vendor was contacted early about this disclosure.
CVE-2026-76533 1 Splunk 1 Splunk Enterprise 2026-11-20 4.2 Medium
In Splunk Enterprise versions below 10.4.5, 10.2.9, 10.0.12, and 9.4.17 on Ubuntu and AlmaLinux, an unauthenticated user who obtains a valid Splunk Web session cookie before the affected user logs out could continue using the cookie after logout to access data and perform actions available to that user. The vulnerability is possible because the logout flow does not invalidate the associated session token on affected deployments. The attacker must obtain the valid session cookie before the affected user logs out of Splunk Web. The issue was reproduced in Splunk Enterprise installations on Ubuntu and AlmaLinux.
CVE-2026-130454 2 Wireshark, Wireshark Foundation 2 Wireshark, Wireshark 2026-11-20 5.5 Medium
IEEE 1905 protocol dissector crash in 4.6.0 to 4.6.9 and 4.4.0 to 4.4.19 allows denial of service
CVE-2026-130461 2 Wireshark, Wireshark Foundation 2 Wireshark, Wireshark 2026-11-20 6.5 Medium
IEEE 1609.2 protocol dissector crash in 4.6.0 to 4.6.9 and 4.4.0 to 4.4.19 allows denial of service
CVE-2026-99772 1 Linux 2 Linux, Linux Kernel 2026-11-20 4.7 Medium
In the Linux kernel, the following vulnerability has been resolved: drm/drm_crtc: fix race with dma_fence_signal() in ::get_driver_name() Since commit 541c8f2468b9 ("dma-buf: detach fence ops on signal v3"), I'm seeing the BUG_ON() triggering in drm_crtc's fence_to_crtc() via drm_crtc_fence_get_driver_name() regularly: Call trace: panic+0x58/0x5c die+0x160/0x178 bug_brk_handler+0x70/0xa4 call_el1_break_hook+0x3c/0x1a0 do_el1_brk64+0x24/0x74 el1_brk64+0x34/0x54 el1h_64_sync_handler+0x80/0xfc el1h_64_sync+0x84/0x88 drm_crtc_fence_get_driver_name+0x60/0x68 (P) sync_file_get_name+0x184/0x45c sync_file_ioctl+0x404/0xf70 __arm64_sys_ioctl+0x124/0x1dc This looks to be caused by a code flow similar to the following: +++ snip +++ thread A thread B ioctl(SYNC_IOC_FILE_INFO) sync_file_ioctl() sync_file_get_name() dma_fence_signal_timestamp_locked() dma_fence_driver_name() ops = rcu_dereference(fence->ops) if (!dma_fence_test_signaled_flag()) ops->get_driver_name(fence) i.e. drm_crtc_fence_get_driver_name() test_and_set_bit(SIGNALED) RCU_INIT_POINTER(fence->ops, NULL) drm_crtc_fence_get_driver_name() BUG_ON(rcu_access_pointer(fence->ops) != &drm_crtc_fence_ops) +++ snap +++ In other words, a fence's ops pointer can now change to NULL on signal, which wasn't the case before the culprit commit and hence the BUG_ON() triggers. Simply drop the BUG_ON() as it's usage of fence ops is invalid now, and because using BUG_ON() and friends to take down the system is an unacceptable way to handle a failure. Note that the adjacent drm_crtc_fence_get_timeline_name() has the same problem and is fixed by this patch as well.
CVE-2026-94108 2 Getid3, James-heinrich 2 Getid3, Getid3 2026-11-20 6.5 Medium
getID3 before 1.9.27 contains an XML external entity injection vulnerability in the XML2array helper function that fails to properly disable entity loading on PHP before 8.0. Attackers can craft malicious XML metadata in media files to disclose local files, perform server-side request forgery, or cause denial of service through entity expansion.
CVE-2026-99751 1 Linux 2 Linux, Linux Kernel 2026-11-20 4.4 Medium
In the Linux kernel, the following vulnerability has been resolved: bpf: Fix skb_pull() BUG in __bpf_redirect_neigh() The issue: This is a follow-up to the short link-layer header fixes from Eric. After vlan pop_eth, a privileged SCHED_ACT BPF program can call bpf_skb_change_head(skb, 1, 0) and then bpf_redirect_neigh(). __bpf_redirect_neigh() calls skb_pull(skb, sizeof(*ethh)) after checking only that mac_header < network_header. Nothing verifies that the MAC header is long enough, that it is linear, or that the IP header the redirect goes on to read is linear either. A SCHED_ACT BPF program can do: bpf_skb_change_head(skb, 1, 0); bpf_redirect_neigh(lo, NULL, 0, 0); after vlan pop_eth. The skb then has mac_len == 1 and only one byte of linear data; skb_pull(ETH_HLEN) trips the skb->len < skb->data_len BUG in __skb_pull(): kernel BUG at ./include/linux/skbuff.h:2839! RIP: skb_pull+0x40/0x50 Call Trace: skb_do_redirect -> packet_xmit -> packet_sendmsg Kernel panic - not syncing: Fatal exception in interrupt The v4 and v6 paths read ip_hdr() and ipv6_hdr() as soon as the MAC header is gone. On the AF_PACKET frame below that leaves headlen == 0 after the pull, so the network header sits at skb->tail and the route lookup reads ip4h->protocol, ip4h->saddr and ip4h->daddr past the linear area. The Fix: Use skb_network_offset(), which is the MAC header span, instead of skb->mac_len. mac_len is zero for locally generated tc egress and netkit packets, while the span still rejects the one-byte header produced by pop_eth + bpf_skb_change_head(skb, 1, 0). The single check also covers the mac_header >= network_header test it replaces. Use pskb_may_pull() to make the Ethernet header linear before it is read or pulled, and to make the IP header linear in both the v4 and the v6 path before ip_hdr()/ipv6_hdr() is read. The header pointers are taken after the pull, since pskb_may_pull() may reallocate skb->head. Conditions to recreate the bug: On x86-64 with 4 KiB pages, enable CONFIG_PACKET, CONFIG_BPF_SYSCALL, CONFIG_NET_SCH_INGRESS, CONFIG_NET_CLS_MATCHALL, CONFIG_NET_ACT_VLAN and CONFIG_NET_ACT_BPF. Run as root with BPF loading, network administration and raw-packet privileges. Bring lo up and attach a SCHED_ACT program that calls bpf_skb_change_head(skb, 1, 0), then returns bpf_redirect_neigh(skb->ifindex, NULL, 0, 0): ip link set lo up tc qdisc add dev lo clsact tc filter add dev lo egress matchall action vlan pop_eth pipe \ action bpf object-file neigh_chghead.o section action Send an untagged ETH_P_IP frame of ETH_HLEN + 8192 bytes through an AF_PACKET/SOCK_RAW socket bound to lo, without PACKET_VNET_HDR or PACKET_QDISC_BYPASS. Use a unicast destination MAC. The sender's skb has a 14-byte linear Ethernet prefix and a fragmented payload; pop_eth removes that prefix and change_head restores only one linear byte. The unfixed neighbor redirect then tries to pull 14 bytes and BUGs. Sending the same frame without pop_eth and change_head leaves the IP header in the frags, which is the route lookup reading past skb->tail.
CVE-2026-99758 1 Linux 2 Linux, Linux Kernel 2026-11-20 7.5 High
In the Linux kernel, the following vulnerability has been resolved: sctp: account for chunk padding in sctp_init_cause() sctp_init_cause() accepts a chunk when skb_tailroom() can hold the cause header and the payload. sctp_addto_chunk() then writes 0-3 bytes of padding before that header so the chunk stays 4-byte aligned. The check does not include the padding, and the following skb_put() calls skb_over_panic() from softirq. Count the padding sctp_addto_chunk() is about to write. The cause length on the wire stays the header plus the payload. Found by LLM inspection, triggered and tested the fix.
CVE-2026-132241 1 Jetbrains 1 Teamcity 2026-11-20 7.3 High
In JetBrains TeamCity before 2026.1.3, 2025.11.7 XXE in the .NET build steps auto-discovery was possible
CVE-2026-99744 1 Linux 2 Linux, Linux Kernel 2026-11-20 6.5 Medium
In the Linux kernel, the following vulnerability has been resolved: net: atl1c: drop oversized RX frames instead of panicking atl1c sizes its receive buffers from the netdev MTU plus a fixed set of L2 overheads, which comes to 1522 bytes at the default MTU. A link partner that sends a longer frame - in practice a MikroTik CCR2004-1G-2XS-PCIe, whose RouterOS side defaults to l2mtu 1600 while the host stays at MTU 1500 - makes the length reported by the RX return descriptor exceed what the hardware wrote, and skb_put() then either includes bytes that were never received or trips skb_over_panic and takes the host down. Compare the descriptor length against buffer_info->length, the length the hardware was given, rather than against skb_tailroom(): the skb carries 64 bytes of slack for the DMA erratum, so tailroom is larger than the DMA buffer and a frame in between would pass the check and still be delivered with a tail the device never wrote. The same test rejects frames shorter than ETH_HLEN + ETH_FCS_LEN; before this change a reported length below ETH_FCS_LEN underflowed in skb_put(). The frame is dropped with kfree_skb_reason(SKB_DROP_REASON_PKT_TOO_BIG) so drop_monitor and the kfree_skb tracepoint see it, and counted through dev_core_stats_rx_dropped_inc(), which survives atl1c_get_stats() overwriting the hardware counters on every read. It also counts as work: atl1c_clean_rfd() has already recycled the RFD, and the refill at the end of the poll only runs when work_done is non-zero, so sustained oversized traffic would otherwise drain the ring and stop RX. Tested on a MikroTik CCR2004-1G-2XS-PCIe (4x AR8151) in a Proxmox VE host, with atl1c built from a DKMS tree carrying this change: the l2mtu-1600 traffic that panics the stock driver is dropped and counted with the patch applied, and received normally once the host MTU is raised to match. This complements commit 36c2009d90f2 ("net: atl1c: fix soft lockup on out-of-range tpd_cons read"), which fixed the TX side of the same "host dies while the card resets" problem.
CVE-2026-99559 1 Linux 2 Linux, Linux Kernel 2026-11-20 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: ARM: 9524/1: mm: align hugetlb mappings to the huge page size mmap(MAP_HUGETLB) on 32-bit Arm can return an address which is not aligned to the huge page size. In a QEMU virt guest, unmapping the VMA then hits the alignment check in __unmap_hugepage_range(): kernel BUG at mm/hugetlb.c:5213! Internal error: Oops - BUG: 0 [#1] SMP ARM PC is at __unmap_hugepage_range+0x540/0x584 LR is at __zap_vma_range+0x13a0/0x1410 Commit 7bd3f1e1a9ae ("mm: make hugetlb mappings go through mm_get_unmapped_area_vmflags") made hugetlb mappings use the architecture's arch_get_unmapped_area(). The generic implementations handle hugetlb alignment, but the Arm implementations only account for the optional SHMLBA cache-colouring constraint. A 4 KiB-page kernel can therefore align the mapping to 4 KiB or 16 KiB instead of the required 2 MiB. Set the alignment mask from the file's hstate for hugetlb mappings in both Arm implementations. Huge-page alignment also satisfies the SHMLBA constraint.
CVE-2026-99562 1 Linux 2 Linux, Linux Kernel 2026-11-20 6.5 Medium
In the Linux kernel, the following vulnerability has been resolved: ksmbd: reject FSCTL_SET_ZERO_DATA on a directory handle An authenticated client with a writable tree connection can open a directory with FILE_WRITE_DATA and send FSCTL_SET_ZERO_DATA on that handle. The handler only checks fp->daccess & FILE_WRITE_DATA_LE, but on a directory FILE_WRITE_DATA is the legitimate add-file right, so the check passes. ksmbd_vfs_zero_data() then calls kernel_write() on the directory file, which has no FMODE_WRITE, and __kernel_write_iter() hits WARN_ON_ONCE(!(file->f_mode & FMODE_WRITE)), panicking a panic_on_warn kernel. Before commit 25e414db7033 ("ksmbd: report holes in allocated range queries") the dense-file path used vfs_fallocate(), which rejects directories with -EISDIR. The kernel_write() loop that replaced it has no such check. Reject a directory handle in ksmbd_vfs_zero_data() before writing, as ksmbd_vfs_write() already does for SMB2_WRITE. WARNING: fs/read_write.c:608 at __kernel_write_iter+0x74b/0x8c0 Workqueue: ksmbd-io handle_ksmbd_work Call Trace: kernel_write+0x1ef/0x4d0 ksmbd_vfs_zero_data+0x413/0x590 smb2_ioctl+0x21fa/0x66a0 handle_ksmbd_work+0x61b/0x1ff0
CVE-2026-99695 1 Linux 2 Linux, Linux Kernel 2026-11-20 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: ocfs2: find the xattr entry again after converting a block to a bucket ocfs2_xattr_create_index_block() turns a non-indexed xattr block into a tree by copying it into a bucket, and the copy sorts the entries: a block holds them in insertion order, a bucket by name hash. ocfs2_xattr_update_xattr_search() nevertheless relocates the caller's search by the index the entry had in the block, so unless the two orders agreed it points at an unrelated entry, and nothing between there and the write compares that entry's name with the one being set. Setting an xattr whose new value no longer fits the block arrives here with xs->not_found clear. The block gave up because ocfs2_xa_block_can_reuse() wants an exact namevalue size match, while ocfs2_xa_bucket_can_reuse() only wants an entry at least as large as the new one, so the bucket accepts a pair the block rejected and the update lands on whichever entry the sort left at that index. Equal padded name lengths get that other attribute's value replaced in place and its name left alone, so setxattr returns success while the attribute asked for keeps its old value. A longer one trips ocfs2_xa_reuse_entry()'s BUG_ON, and a shorter one is refused by the bucket as well, so ocfs2_xa_prepare_entry() wipes the entry and writes the new name over it, leaving xe_name_hash describing a name that is no longer there. Find the entry again by the name being set, matching the type as well. The copy carries every entry and every name over unchanged, and (type, name) pairs are unique within a block, so the match is exact. The type matters because the handlers strip their prefix before calling ocfs2_xattr_set(), so user.foo and trusted.foo share a stored name, a stored length and a hash, and both can sit in the same block. The name has to come from xi rather than from xs->here: a failed set can remove the entry xs->here names, and only the "growing" caller sets ctxt->set_abort, which is what stops the conversion. Scan every entry rather than narrowing on the hash the way ocfs2_find_xe_in_bucket() does, since an existing entry keeps the hash it was stored under, which a kernel that sign-extended the name bytes made different from the one computed now. An empty result means the entry did not survive the failed set and this has become an insert; leaving xs->here alone would keep it pointing into the block, which is rewritten as a tree root before the caller reads it again.
CVE-2026-130669 1 Imagemagick 1 Imagemagick 2026-11-20 3.3 Low
ImageMagick before 7.1.2-35 contains a null pointer dereference vulnerability that allows attackers to crash the process by using the -subimage option on a single-image list. Attackers can supply input producing an image list with only one image while -subimage is applied, causing a denial of service.
CVE-2026-73611 1 Filebrowser 1 Filebrowser 2026-11-20 6.8 Medium
File Browser versions 2.50.0 before 2.63.22 fail to validate JWT expiration when proxy authentication is configured with a non-default logout page. Attackers with a previously valid token can access protected routes and administrative endpoints indefinitely, and exchange expired tokens for fresh ones via the renewal endpoint.
CVE-2026-22186 1 Openmicroscopy 1 Bio-formats 2026-11-20 7.1 High
Bio-Formats versions before 8.5.0 contain an XML External Entity (XXE) vulnerability in the Leica Microsystems metadata parsing component (e.g., XLEF). The parser uses an insecurely configured DocumentBuilderFactory when processing Leica XML-based metadata files, allowing external entity expansion and external DTD loading. A crafted metadata file can trigger outbound network requests (SSRF), access local system resources where readable, or cause a denial of service during XML parsing.
CVE-2026-99570 1 Linux 2 Linux, Linux Kernel 2026-11-20 4.1 Medium
In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to invalidate curseg if change_curseg() fails Our consistency stress test (fsstress + fio + atomic write workers + "f2fs_io shutdown 1") triggers below kernel BUG: F2FS-fs (vdd): Stopped filesystem due to reason: 0 ------------[ cut here ]------------ kernel BUG at fs/f2fs/segment.c:3989! Oops: invalid opcode: 0000 [#1] SMP KASAN PTI Workqueue: writeback wb_workfn (flush-253:48) RIP: 0010:f2fs_allocate_data_block+0x257a/0x38e0 Call Trace: <TASK> do_write_block+0x155/0xc10 f2fs_outplace_write_data+0x192/0x340 f2fs_do_write_data_page+0xc57/0x1880 f2fs_write_single_data_page+0xda9/0x15a0 f2fs_write_cache_pages+0x973/0x1f20 __f2fs_write_data_pages+0x6c4/0x1890 do_writepages+0x21e/0x560 __writeback_single_inode+0x119/0x11b0 writeback_sb_inodes+0x67d/0x17a0 wb_writeback+0x207/0x820 wb_workfn+0x128/0xc30 process_one_work+0x925/0x1600 worker_thread+0x60a/0xff0 kthread+0x35f/0x460 ret_from_fork+0x474/0x7e0 ret_from_fork_asm+0x1a/0x30 </TASK> The BUG is f2fs_bug_on(sbi, curseg->next_blkoff >= BLKS_PER_SEG(sbi)) in f2fs_allocate_data_block(), next_blkoff was 512. The root cause is a race in between atomic write commit and shutdown as below: Thread A (commit atomic write) Thread B (shutdown) Thread C (writeback) - f2fs_ioc_commit_atomic_write - f2fs_commit_atomic_write - __f2fs_commit_atomic_write - __replace_atomic_write_block - f2fs_replace_block - __f2fs_replace_block - f2fs_ioc_shutdown - f2fs_do_shutdown : F2FS_GOING_DOWN_METASYNC - f2fs_sync_fs - f2fs_write_single_data_page : pass f2fs_cp_error() check - f2fs_stop_checkpoint : set CP_ERROR_FLAG - change_curseg - reset_curseg : curseg->segno = new_segno : curseg->alloc_type = SSR : curseg->next_blkoff = __next_free_blkoff() which is BLKS_PER_SEG if there is no free slot in new_segno - f2fs_get_sum_cache : return -EIO due to f2fs_cp_error() : return error w/o restoring curseg : goto out_unlock, skip restoring old segno, blkoff and alloc_type - f2fs_do_write_data_page - f2fs_outplace_write_data - do_write_block - f2fs_allocate_data_block : curseg->segno is valid : f2fs_bug_on(next_blkoff >= BLKS_PER_SEG) Since commit 86f33603f8c5 ("f2fs: handle errors of f2fs_get_meta_page_nofail"), change_curseg() can fail after the curseg has already been switched to the new segment, then the curseg is left in an inconsistent state: it points to a segment which may have no free slot, its summary block is zeroed, and the caller can not restore it. Subsequent block allocation on the curseg will trigger the BUG. Moreover, the writeback thread dies with curseg_lock, curseg_mutex and sentry_lock held, so the commit, shutdown and other I/O threads hang in D state. Since change_curseg() only fails once CP_ERROR_FLAG is set, no checkpoint will be committed afterward, let's invalidate the curseg via reset_curseg_fields() on failure, as new_curseg() does for -ENOSPC, then f2fs_allocate_data_block() will fail with -ENOSPC on the curseg instead of triggering BUG, and do_write_block() can handle the error since CP_ERROR_FLA ---truncated---
CVE-2026-131299 1 Splunk 1 Splunk App For Stream 2026-11-20 7.5 High
In Splunk App for Stream versions below 8.1.7, an unauthenticated user who can reach the Splunk App for Stream Representational State Transfer (REST) API on the management port (8089) could upload an Extensible Markup Language (XML) vocabulary file, which lets the vocabulary upload endpoint read local files accessible to the Splunk process or send outbound requests. The vulnerability is possible because the vocabulary upload endpoint parses uploaded XML without an application-level policy that blocks external entity resolution. For more information see About Splunk Stream (https://help.splunk.com/en/splunk-enterprise/collect-stream-data/install-and-configure-splunk-stream/8.1/introduction/about-splunk-stream) and restmap.conf (https://help.splunk.com/en/splunk-enterprise/administer/admin-manual/9.4/configuration-file-reference/9.4.3-configuration-file-reference/restmap.conf) in the Splunk documentation.
CVE-2026-99696 1 Linux 2 Linux, Linux Kernel 2026-11-20 6.1 Medium
In the Linux kernel, the following vulnerability has been resolved: ocfs2: find the xattr entry again after defragmenting a bucket ocfs2_xattr_set_entry_bucket() hands loc.xl_entry to ocfs2_xa_set() twice: once for the bucket as it stands, and, if that reports -ENOSPC, once more after ocfs2_defrag_xattr_bucket() has packed the name/value pairs down. Defragmenting ends by sorting the entry array on xe_name_hash. Buckets are kept sorted, so the sort only permutes entries that share a hash, but lib/sort.c is an unstable heapsort and it does permute them. loc.xl_entry is an address inside xh_entries[], so afterwards it denotes whichever entry landed in that slot rather than the one the search found. The second ocfs2_xa_set() then works on the wrong entry. Nothing on that path compares the entry's name with xi->xi_name, so what happens depends on how the two entries compare in size: ocfs2_xa_reuse_entry() trips its BUG_ON() when the padded name sizes differ, and otherwise the new value is written into the neighbouring attribute's value slot while the attribute being set is left untouched. setxattr() reports success either way. Remember the entry's hash before defragmenting and look the entry up again afterwards, the way ocfs2_xattr_bucket_find() does. An entry that cannot be found again means the bucket no longer holds what the search found, so fail with -EFSCORRUPTED rather than writing through the stale pointer.