| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: Clamp implicit feedback packet count to URB capacity
data_ep_set_params() allocates each data URB for exactly u->packets
isochronous frames, so urb->iso_frame_desc[] has u->packets slots and
ctx->packets is the driver's only record of that limit. For an implicit
feedback sink, snd_usb_queue_pending_output_urbs() overwrites it with the
sync source's packet count, which is calculated independently from the
capture endpoint's parameters. When that count is larger,
prepare_playback_urb() and prepare_silent_urb() can write
iso_frame_desc[] past the allocation; their existing bounds limit payload
bytes, not the descriptor index.
The reproducer uses a high-speed UAC2 device declaring bInterval 1 for
implicit feedback capture (8 packets) and bInterval 4 for playback
(1 packet). On the first capture completion after the stream starts, it
accesses seven descriptors spanning 112 bytes beyond the one-packet URB:
BUG: KASAN: slab-out-of-bounds in prepare_playback_urb (sound/usb/pcm.c:1560)
Write of size 4 at addr ffff88801e696ad0 by task vhci_rx/178
prepare_playback_urb (sound/usb/pcm.c:1560)
prepare_outbound_urb (sound/usb/endpoint.c:340)
snd_usb_queue_pending_output_urbs (sound/usb/endpoint.c:501)
snd_complete_urb (sound/usb/endpoint.c:1834)
__usb_hcd_giveback_urb (drivers/usb/core/hcd.c:1657)
usb_hcd_giveback_urb (drivers/usb/core/hcd.c:1741)
vhci_rx_loop (drivers/usb/usbip/vhci_rx.c:107)
kthread (kernel/kthread.c:436)
The buggy address belongs to the object at ffff88801e696a00
which belongs to the cache kmalloc-256 of size 256
The buggy address is located 0 bytes to the right of
allocated 208-byte region [ffff88801e696a00, ffff88801e696ad0)
Record the allocated packet count per endpoint and clamp both the adopted
count and the packet-size copy to it. Fold the Format Type II delimiter
into urb_packs before the allocation loop so the recorded limit matches
every URB. |
| In the Linux kernel, the following vulnerability has been resolved:
pppoatm: ensure a writable skb header and linear data
In pppoatm_send(), LLC encapsulation checks whether there is sufficient
headroom for the 4-byte LLC header, but does not ensure that the skb header
is writable.
Normal transmit packets passing through ppp_start_xmit() have their header
unshared via skb_cow_head(). However, packets can also reach pppoatm_send()
via PPP channel bridging (PPPIOCBRIDGECHAN) without going through
ppp_start_xmit().
Use skb_cow_head() to ensure both sufficient headroom and a writable
header before pushing the LLC header.
While at it:
- Call pskb_may_pull(skb, 1) before inspecting skb->data[0] to prevent
out-of-bounds reads on zero-length or non-linear frames (e.g. from
bridging).
- Defer SC_COMP_PROT protocol compression until after pppoatm_may_send()
succeeds. This eliminates the temporary skb allocation on admission failure
and completely removes the fragile "undo" heuristic at the nospace label,
avoiding any risk of reading uninitialized headroom or performing an
unbalanced skb_push(). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: wilc1000: fix RX buffer OOB-write in wilc_wlan_handle_isr_ext()
wilc_wlan_handle_isr_ext() takes the RX transfer size from the
device-reported interrupt status register (a 15-bit field shifted left by 2,
up to 131068 bytes) and reads that many bytes from the device into
rx_buffer, which is only WILC_RX_BUFF_SIZE (96K) large. The wrap
check only handles the current offset; the size itself is never
compared against the buffer, so a bogus SDIO device can make the driver
OOB-write rx_buffer by up to ~32K with data it controls.
The oversized transfer also leaves rx_buffer_offset past the end of
the buffer, after which the unsigned wrap check stops working and
the overflow can repeat.
Drop any transfer whose size exceeds the RX buffer, acknowledging
the data interrupt and re-arming the RX engine so the bogus frame is
discarded and reception can continue. This also restores the
rx_buffer_offset <= WILC_RX_BUFF_SIZE invariant the wrap check
relies on.
This is not expected to change driver behavior in most cases:
without this check, an oversized transfer would most likely
corrupt neighboring kernel memory instead of completing anyway, and
the drop path performs the same interrupt acknowledgment and RX
engine re-arming as the normal path, so subsequent transfers are
received unaffected.
Discovered by Atuin - Automated Vulnerability Discovery Engine. |
| A vulnerability has been found in Tenda AC5 02.03.01.111_multi. Affected by this issue is some unknown functionality of the file /goform/setWifi of the component Wifi Handler. Such manipulation of the argument wifiPwd leads to stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. |
| A security vulnerability has been detected in vllm-project vLLM up to 0.31.0. This impacts the function conv_ssm_forward of the file vllm/model_executor/layers/mamba/mamba_mixer2.py of the component Completions Request Handler. The manipulation leads to out-of-bounds read. The attack is possible to be carried out remotely. The exploit has been disclosed publicly and may be used. The project was informed of the problem early through an issue report but has not responded yet. |
| In multiple functions of MessageQueueBase.h, there is a possible out of bounds read due to an incorrect bounds check. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In multiple functions of PduParser.java, there is a possible out of bounds read due to a missing bounds check. This could lead to a remote denial of service with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In returnOutputBufferLocked of DeprecatedCamera3StreamSplitter.cpp, there is a possible out-of-bounds read due to a missing bounds check. This could lead to local information disclosure with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In multiple functions of PduParser.java, there is a possible persistent denial of service due to a missing bounds check. This could lead to remote denial of service with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In multiple locations, there is a possible out of bounds write due to an incorrect bounds check. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| A vulnerability was detected in vgmstream up to r2117. Affected by this vulnerability is the function ps_find_padding of the file src/coding/psx_decoder.c of the component VAG File Handler. Performing a manipulation results in out-of-bounds read. The attack is possible to be carried out remotely. The patch is named 4b8316652a30d40f99ad43310bed273fd1f8a7a3. It is suggested to install a patch to address this issue. |
| A flaw has been found in NASA cFS up to 7.0.1. This issue affects the function CFE_FS_ParseInputFileNameEx of the file cfe/modules/fs/fsw/src/cfe_fs_api.c. This manipulation causes out-of-bounds read. Remote exploitation of the attack is possible. The pull request to fix this issue awaits acceptance. |
| A security flaw has been discovered in vgmstream up to r2117. This affects the function parse_params/txtp_parse of the file src/meta/txtp_parser.c of the component TXTP File Handler. The manipulation results in out-of-bounds write. The attack may be launched remotely. The patch is identified as 4669d37a6af94866f6f0628678f9f90d46954e8b. It is best practice to apply a patch to resolve this issue. |
| Vulnerability in NetScaler ADC and NetScaler Gateway.
This issue affects ADC: before 14.1-73.41, before 13.1-64.28, before 14.1-73.41 FIPS, and before 13.1-37.282; Gateway: before 14.1-73.41 and before 13.1-64.28. |
| A security vulnerability has been detected in Totolink A3002MU 1.0.0-B20230403.1455. This affects an unknown function of the file /boafrm/formIpQoS of the component QoS Rule Handler. The manipulation of the argument addQos/comment/entry_name leads to stack-based buffer overflow. Remote exploitation of the attack is possible. The exploit has been disclosed publicly and may be used. |
| A weakness has been identified in vgmstream up to r2117. This impacts the function make_group_random of the file src/meta/txtp_process.c of the component TXTP File Handler. This manipulation causes use after free. The attack needs to be launched locally. Patch name: ae37662ad626254ddd96ad69ac263792d7a92024. It is recommended to apply a patch to fix this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: sr: restore network header before routing and forwarding
ipv6_srh_rcv() runs with skb->data at the Segment Routing Header (SRH)
while skb_network_header() points at the IPv6 header.
When segments_left > 0, ipv6_srh_rcv() previously restored the skb->data
position by pushing sizeof(struct ipv6hdr), assuming the SRH immediately
followed the fixed IPv6 header. If another extension header (such as a
Hop-by-Hop options header) precedes the SRH, skb_network_offset()
remained negative.
This led to two problems:
1. During ip6_route_input(), fib6_rules_early_flow_dissect() invokes
__skb_flow_dissect() which passes the negative skb_network_offset()
to flow dissection, breaking BPF and C flow dissector logic.
2. If forwarded via ip6_forward() or redirected via act_mirred, downstream
handlers (like sch_fragment() or neighbour output) pass the negative
offset as an unsigned length, triggering OOB memcpy or buffer overflows.
Fix this by pushing -skb_network_offset(skb) before routing, ensuring
skb_network_offset(skb) is 0 for route lookup / flow dissection as well as
downstream forwarding. On the loopback path, pull skb_transport_offset(skb)
to restore skb->data to the SRH before looping back. |
| In the Linux kernel, the following vulnerability has been resolved:
ipvs: fix reversed sequence option serialization
hton_seq() expects the host-order source first and the unaligned
network-order destination second. The version 1 sync sender passes these
arguments in reverse for both sequence blocks. This leaves 24 bytes of the
kmalloc-backed message unwritten. It may disclose stale heap data and
replace the live connection sequence state with values read from the
buffer.
Pass the connection sequence state as the source and the message payload as
the destination for both blocks. |
| In the Linux kernel, the following vulnerability has been resolved:
virtio_console: do not free control-out buffers on remove
__send_control_msg() publishes &portdev->cpkt as the control-out
virtqueue cookie. remove_vqs() walks every virtqueue and passes leftover
cookies to free_buf(), which treats them as struct port_buffer and
reads sgpages.
If a control message is still on c_ovq when the device is unbound,
free_buf() reads past the ports_device object.
KASAN reported slab-out-of-bounds in free_buf():
free_buf
remove_vqs
virtcons_remove
unbind_store
The object was the ports_device allocated in virtcons_probe().
Drain c_ovq without freeing. The packet lives in portdev and is released
with it. |
| In the Linux kernel, the following vulnerability has been resolved:
vdpa_sim_blk: reject out-of-range sector starts
vdpasim_blk_check_range() logs an invalid start sector but continues
validating the request. The subsequent unsigned capacity subtraction can
underflow and let an out-of-range buffer offset reach the data path.
The invalid offset is used by three request paths. VIRTIO_BLK_T_OUT
copies guest data to blk->buffer + offset through
vringh_iov_pull_iotlb(), causing an out-of-bounds write in
_copy_from_iter() or memcpy(). VIRTIO_BLK_T_IN copies from
blk->buffer + offset to the guest through vringh_iov_push_iotlb(),
causing an out-of-bounds read in _copy_to_iter().
VIRTIO_BLK_T_WRITE_ZEROES passes blk->buffer + offset to memset(),
causing an out-of-bounds write.
Reject starts at or beyond the capacity before the subtraction. Treat the
capacity boundary as invalid because the IN and OUT paths round byte counts
down to sectors for validation but later copy the original byte counts. A
sub-sector request at the capacity boundary would otherwise still access
past the end of the buffer.
I found this bug myself, though the patch was written with AI assistance. |
