Export limit exceeded: 403739 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (6945 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-89933 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: pressure: dps310: fix NULL pointer dereference on ACPI probe When the device is enumerated through its ACPI HID (IFX3100), i2c_client_get_device_id() returns NULL: the ACPI-derived client name does not match the driver's i2c_device_id table. dps310_probe() then dereferences that NULL pointer in "iio->name = id->name" and crashes the kernel during probe. The IIO device name is always "dps310", so set it directly and drop the now-unused device-id lookup. | ||||
| CVE-2026-89845 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Avoid req_q_map double-read in qla2x00_error_entry() qla2x00_error_entry() reads ha->req_q_map[que] twice: once for the NULL check and again when assigning it to req. The map slot is cleared by qla25xx_free_req_que() (ha->req_q_map[que_id] = NULL under mq_lock) during queue teardown, while the response-queue interrupt that drives qla2x00_error_entry() is still registered (the IRQ is released later in qla25xx_free_rsp_que()). If the slot is set to NULL between the two reads, req becomes NULL and is dereferenced. Read the slot once into req and NULL-check the local before use. mq_lock is a mutex and cannot be taken from interrupt context, so the single read plus local check is the appropriate fix for the reported NULL dereference. | ||||
| CVE-2026-89977 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: accel/ethosu: check MMIO mapping errors in probe devm_platform_ioremap_resource() returns an error pointer when the register resource cannot be mapped. ethosu_probe() stores it and continues until initialization dereferences it through MMIO accessors. Return the mapping error before initializing the device. | ||||
| CVE-2026-90024 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: midi2: Fix null-pointer dereference in f_midi2_free_ep_reqs A null-pointer dereference occurs in f_midi2_free_ep_reqs() when attempting to clean up an endpoint that was never initialized. When configuring the MIDI 2.0 gadget via configfs and setting the block direction to SNDRV_UMP_DIR_INPUT, the initialization of the midi1_ep_out endpoint is explicitly skipped during the gadget bind phase (f_midi2_bind()). As a result, the usb_ep->card field remains NULL. Later, when the host sets the alternate setting, f_midi2_set_alt() unconditionally stops both the IN and OUT endpoints by calling f_midi2_stop_eps(), which in turn calls f_midi2_free_ep_reqs() for both endpoints. When f_midi2_free_ep_reqs() is called for the uninitialized midi1_ep_out, it attempts to dereference usb_ep->card to determine the number of requests to free, leading to a crash. Fix this by using usb_ep->num_reqs instead of usb_ep->card->info.num_reqs in f_midi2_free_ep_reqs(). usb_ep->num_reqs is correctly set during f_midi2_init_ep() and remains 0 if the endpoint was never initialized, safely avoiding the loop. For consistency, apply the same change to f_midi2_alloc_ep_reqs(). Oops: general protection fault, probably for non-canonical address 0xdffffc00000000ee: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000770-0x0000000000000777] ... RIP: 0010:f_midi2_free_ep_reqs drivers/usb/gadget/function/f_midi2.c:1166 [inline] RIP: 0010:f_midi2_stop_eps+0x28e/0x4d0 drivers/usb/gadget/function/f_midi2.c:1246 ... Call Trace: <TASK> f_midi2_set_alt+0x11c/0xf00 drivers/usb/gadget/function/f_midi2.c:1296 composite_setup+0x1ffd/0x3480 drivers/usb/gadget/composite.c:1933 configfs_composite_setup+0xbd/0x100 drivers/usb/gadget/configfs.c:1877 | ||||
| CVE-2026-61599 | 1 Djust-org | 1 Djust | 2026-09-17 | N/A |
| djust provides Phoenix LiveView-style reactive server-side rendering for Django with Rust-powered performance. Prior to version 1.0.7, the djust live transport resolves the LiveView to mount from a client-supplied dotted path by calling `__import__(module_path, ...)`. The module is imported — running its top-level code (import side effects) — before the framework checks that the resolved object is a `LiveView` subclass and before any per-view authentication. The `LIVEVIEW_ALLOWED_MODULES` allowlist that should contain this is fail-open (`if allowed_modules:` — skipped when the setting is unset, the framework default) and uses loose `startswith` matching. An unauthenticated WebSocket client (the WS handshake does not require auth; per-view auth runs only after import + instantiate) can therefore send a `mount` / `live_redirect_mount` / `url_change` frame (or an SSE mount) with `view = "<any.importable.module>.AnyName"` and cause the server to import — and execute the top-level code of — any importable Python module by name. Version 1.0.7 fixes the issue with a fail-closed resolution gate (`djust._view_resolution.is_view_import_allowed`): a client view path resolves only if (a) its module is already loaded (`sys.modules` — so resolving runs no new code; URL-routed views loaded by URLconf at startup keep working with zero config) or (b) it matches `LIVEVIEW_ALLOWED_MODULES` on a module-segment boundary (explicit opt-in for lazily-imported views). The gate runs before `__import__` at all three sinks (+ defense-in-depth inside `_instantiate_view`). As a workaround, set `LIVEVIEW_ALLOWED_MODULES` to the narrow list of modules that contain your mountable LiveView classes. (Note: pre-patch the allowlist is `startswith`-matched and the import still precedes the subclass check, so this is mitigation, not a complete fix.) | ||||
| CVE-2026-91954 | 1 Freerdp | 1 Freerdp | 2026-09-17 | 6.5 Medium |
| FreeRDP before 3.31.0 contains a null pointer dereference vulnerability in gdi_surface_bits when processing Surface Bits commands with NSCodec codec ID. A malicious RDP server can crash a FreeRDP client by sending a crafted Surface Bits command claiming to use NSCodec, even when the codec is disabled. | ||||
| CVE-2026-55209 | 1 Equinor | 1 Resdata | 2026-09-17 | 9.8 Critical |
| resdata is software for reading and writing result files from the Eclipse reservoir simulator. Prior to 6.2.9, resdata insufficiently validates numeric fields, grid dimensions, keyword sizes, and array indexes while parsing untrusted GRDECL files in lib/resdata/rd_kw_grdecl.cpp and lib/resdata/rd_grid.cpp. Malformed COORD, ZCORN, CORSNUM, ACTNUM, or MAPAXES data can reach rd_grid_alloc_GRDECL_kw__ with inconsistent lengths, while unbounded floating-point conversion can exceed the intended parser buffer. In a network service that accepts untrusted GRDECL files, these conditions can cause a classic buffer overflow, out-of-bounds reads, invalid array access, NULL pointer dereference, memory corruption, or service termination. This issue is fixed in version 6.2.9. | ||||
| CVE-2026-76865 | 1 Netcore | 1 Nr255-v | 2026-09-17 | 4.9 Medium |
| Netcore NR255-V version 1.5.130703 contains a null pointer dereference vulnerability in the QoS setter CGI handlers filter_conn_del_cgi.c and gre_prio_set_cgi.c due to unchecked atoi() results. An attacker can trigger the flaw by supplying crafted input to these handlers, causing a denial of service. | ||||
| CVE-2026-76868 | 1 Netcore | 1 Nr255-v | 2026-09-17 | 4.9 Medium |
| Netcore NR255-V version 1.5.130703 contains a null pointer dereference vulnerability in route_policy_add.cgi caused by a missing exit_port parameter. Attackers can send requests lacking the exit_port field to trigger the null pointer dereference, resulting in a denial of service. | ||||
| CVE-2026-77692 | 1 Isc | 1 Bind | 2026-09-17 | 7.5 High |
| An attacker can cause `named` to abort by sending a crafted DNS-over-HTTPS request with a cryptographically invalid SIG(0) record, and then closing the transport connection prematurely. This issue affects BIND 9 versions 9.20.0 through 9.20.27, 9.21.0 through 9.21.25, and 9.20.9-S1 through 9.20.27-S1. | ||||
| CVE-2026-76927 | 1 Wireshark | 1 Wireshark | 2026-09-17 | 4.7 Medium |
| H.245 protocol dissector crash in 4.6.0 to 4.6.7 and 4.4.0 to 4.4.18 allows denial of service | ||||
| CVE-2026-76922 | 1 Wireshark | 1 Wireshark | 2026-09-17 | 5.5 Medium |
| Bluetooth BR/EDR FHS protocol dissector crash in 4.6.0 to 4.6.7 and 4.4.0 to 4.4.18 allows denial of service | ||||
| CVE-2026-91782 | 1 Gnu | 1 Binutils | 2026-09-17 | 3.3 Low |
| A vulnerability was detected in GNU Binutils 2.47. Affected by this vulnerability is the function elf_x86_allocate_dynrelocs of the file bfd/elfxx-x86.c of the component Dynamic Relocation Allocation. The manipulation results in null pointer dereference. The attack requires a local approach. The exploit is now public and may be used. Upgrading to version 2.48 addresses this issue. The patch is identified as d1268210b6f6/471130b39c0/283d3198bed/0a84e560216/a692a633d40. Upgrading the affected component is recommended. | ||||
| CVE-2026-76825 | 1 Zope | 1 Restrictedpython | 2026-09-17 | 8.4 High |
| RestrictedPython is a tool that helps define a subset of the Python language for accepting program input in a trusted environment. Prior to 8.4, RestrictedPython could allow a sandbox escape when a custom import policy or globals exposed the standard library string module, the string.Formatter class, a Formatter instance, or a Formatter subclass to restricted code. The string.Formatter methods format, get_field, get_value, and vformat performed attribute and item traversal internally without passing through RestrictedPython's safer_getattr protections. Restricted code could use those live object references to reach function globals, builtins, file access, or code execution primitives, affecting confidentiality, integrity, and availability in the host environment. This issue is fixed in version 8.4. | ||||
| CVE-2026-89912 | 1 Linux | 1 Linux Kernel | 2026-09-16 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: vgic-its: Don't dereference a NULL collection on ITT save MAPC with V=0 drops ite->collection but leaves the ITE on the device's ITT list, and vgic_its_save_ite() dereferences it unconditionally. A guest that issues MAPD, MAPTI and then MAPC(V=0) therefore oopses the host when the VMM issues KVM_DEV_ARM_ITS_SAVE_TABLES to migrate it. That sequence is UNPREDICTABLE per the architecture, but KVM already handles the resulting state in the translate, MOVI and DISCARD paths. Save a zeroed entry, which vgic_its_restore_ite() reads back as invalid. Skipping the ITE instead would leave the ITT slot holding whatever is in guest memory, and restore rejects an entry naming a collection the restored collection table does not have. | ||||
| CVE-2026-19534 | 2 Nodejs, Undici | 2 Undici, Undici | 2026-09-16 | 7.5 High |
| undici's WebSocket client crashes the whole Node.js process during the opening handshake when a server responds with a subprotocol that the client never requested. A default WebSocket connection sends no subprotocol, but if the server's 101 response includes a Sec-WebSocket-Protocol header, undici dereferences a null value while checking it against the requested list and throws an uncaught TypeError. Because that code runs inside a microtask with no surrounding error handling, the exception propagates and terminates the process under Node's default behavior, instead of gracefully failing the connection as required by the WebSocket protocol. Any application that opens a WebSocket to an attacker-controlled or compromised server, or over a plaintext connection subject to a machine-in-the-middle, can be crashed remotely without authentication in the default configuration. This affects undici versions from 6.7.0 up to 6.28.1, from 7.0.0 up to 7.29.1, and from 8.0.0 up to 8.10.2. Users should upgrade to undici 6.28.1, 7.29.1, or 8.10.2. | ||||
| CVE-2026-82055 | 1 Mongodb | 2 Mongodb, Mongodb Server | 2026-09-16 | 6.5 Medium |
| A security issue exists in MongoDB's 2dsphere index key generation that can cause a server crash due to a null pointer dereference. When a specially crafted GeoJSON document is inserted into a collection with a 2dsphere index, an inconsistency in geometry parsing can leave an internal object in an invalid, partially initialized state. During subsequent index key generation, access to this improperly initialized object results in a null pointer dereference that terminates the mongod process. An authenticated user with write access can use this to cause a denial of service. | ||||
| CVE-2020-20212 | 1 Mikrotik | 1 Routeros | 2026-09-16 | 6.5 Medium |
| Mikrotik RouterOs 6.44.5 (long-term tree) suffers from a memory corruption vulnerability in the /nova/bin/console process. An authenticated remote attacker can cause a Denial of Service (NULL pointer dereference). | ||||
| CVE-2026-90573 | 1 Gpac | 1 Gpac | 2026-09-16 | 3.3 Low |
| A vulnerability was identified in GPAC up to f1219cde. The impacted element is the function gf_sg_mfurl_del of the file scenegraph/vrml_tools.c of the component MP4Box. The manipulation leads to null pointer dereference. Local access is required to approach this attack. The exploit is publicly available and might be used. This product adopts a rolling release strategy to maintain continuous delivery. Therefore, version details for affected or updated releases cannot be specified. Upgrading to version abi-16.23 is sufficient to resolve this issue. The identifier of the patch is 49dee5cad329cfed310c1682703df7daa47df31a. It is recommended to upgrade the affected component. | ||||
| CVE-2026-66303 | 1 Microsoft | 4 Skype For Business Server, Skype For Business Server 2015, Skype For Business Server 2019 and 1 more | 2026-09-16 | 6.5 Medium |
| Null pointer dereference in Skype for Business allows an authorized attacker to deny service over a network. | ||||