| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Improper Validation of Specified Quantity in Input vulnerability in Themeum Kirki kirki allows Accessing Functionality Not Properly Constrained by ACLs.This issue affects Kirki: from n/a through 6.3.1. |
| A flaw was found in operator-foundry. The absence of automated dependency-update and vulnerability-scanning configurations in the repository increases the risk of undetected security vulnerabilities. This lack of automated security checks could potentially lead to the inclusion of known vulnerable components, which might then be exploited by an attacker if those underlying vulnerabilities are present and exploitable. |
| An out-of-bounds read in libXi's XI2 enter/leave/focus cookie conversion in libXi before 1.8.4 could be used by malicious X server to crash an attached X client. |
| colmux in collectl before 4.3.20.2 does not sanitize ANSI/VT100 terminal escape sequences in data received from remote collectl instances before displaying it, allowing a local user on a monitored host to inject escape sequences into the terminal of an operator running colmux, via a crafted process name (argv[0]). |
| Memory Corruption when processing invalid HT40 channel layouts during dynamic channel switching operations. |
| The web management service in affected RouterOS versions contains an integer underflow in its HTTP request body handling that is reachable before authentication. This can be leveraged by an unauthenticated network attacker to achieve arbitrary code execution as root, or to cause a denial of service, using a single crafted request. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btintel: validate version TLV value lengths
btintel_parse_version_tlv() verifies that a complete TLV is present in
the response, but it does not ensure that the value is long enough for
the specific TLV type. A short value can therefore cause an
out-of-bounds read through get_unaligned_le16(), get_unaligned_le32(),
or memcpy().
Reject values shorter than the minimum required by each known TLV type.
Also reject responses that do not contain the Command Complete Status
field. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: sr: restore network header before routing and forwarding
ipv6_srh_rcv() runs with skb->data at the Segment Routing Header (SRH)
while skb_network_header() points at the IPv6 header.
When segments_left > 0, ipv6_srh_rcv() previously restored the skb->data
position by pushing sizeof(struct ipv6hdr), assuming the SRH immediately
followed the fixed IPv6 header. If another extension header (such as a
Hop-by-Hop options header) precedes the SRH, skb_network_offset()
remained negative.
This led to two problems:
1. During ip6_route_input(), fib6_rules_early_flow_dissect() invokes
__skb_flow_dissect() which passes the negative skb_network_offset()
to flow dissection, breaking BPF and C flow dissector logic.
2. If forwarded via ip6_forward() or redirected via act_mirred, downstream
handlers (like sch_fragment() or neighbour output) pass the negative
offset as an unsigned length, triggering OOB memcpy or buffer overflows.
Fix this by pushing -skb_network_offset(skb) before routing, ensuring
skb_network_offset(skb) is 0 for route lookup / flow dissection as well as
downstream forwarding. On the loopback path, pull skb_transport_offset(skb)
to restore skb->data to the SRH before looping back. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: mpt3sas: Avoid out-of-bounds cpumask_of_node() call in _base_assign_reply_queues()
dev_to_node() can return NUMA_NO_NODE (-1) on systems without NUMA
topology information for the PCI device, such as single-socket boards
that don't expose device-to-node affinity. Passing -1 directly into
cpumask_of_node() indexes node_to_cpumask_map[-1], an out-of-bounds
array read caught by UBSAN:
UBSAN: array-index-out-of-bounds in arch/x86/include/asm/topology.h:72:28
index -1 is out of range for type 'cpumask *[1024]'
Fall back to cpu_online_mask when no NUMA node is available, rather than
assuming dev_to_node() always returns a valid node index. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: caiaq: Fix potential double-free at error path
The fix for caiaq driver's resource management to handle the errors
tries to release the resources in a common destructor call, but as a
sashiko review for another patch suggested, some of the audio
resources such as URBs have been already freed, and this may lead to a
double-free.
For addressing the double-free, call the common destructor function
from each place, and assure that the resource pointers get cleared. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Mark bpf_btf_find_by_name_kind() as sleepable
When bpf_btf_find_by_name_kind() finds a type in module BTF, it
returns a new BTF object fd through __btf_new_fd(). This reaches
anon_inode_getfd(), which can sleep while allocating or expanding the
current task fd table.
The helper prototype does not set might_sleep, so the verifier allows
the helper in non-sleepable contexts such as BPF timer callbacks. The
fd allocation can then sleep in softirq context and install the fd into
the interrupted task.
Mark the helper as sleepable. This preserves calls from the main body
of a sleepable syscall program while rejecting calls from its
non-sleepable regions. |
| In the Linux kernel, the following vulnerability has been resolved:
virtio_console: do not free control-out buffers on remove
__send_control_msg() publishes &portdev->cpkt as the control-out
virtqueue cookie. remove_vqs() walks every virtqueue and passes leftover
cookies to free_buf(), which treats them as struct port_buffer and
reads sgpages.
If a control message is still on c_ovq when the device is unbound,
free_buf() reads past the ports_device object.
KASAN reported slab-out-of-bounds in free_buf():
free_buf
remove_vqs
virtcons_remove
unbind_store
The object was the ports_device allocated in virtcons_probe().
Drain c_ovq without freeing. The packet lives in portdev and is released
with it. |
| In the Linux kernel, the following vulnerability has been resolved:
vhost/vdpa: reject VRING_NUM larger than device max
vhost_vring_set_num() accepts any non-zero power-of-two queue size that
fits in 16 bits. vhost-vdpa then passes that value to set_vq_num()
without comparing it with get_vq_num_max().
A process with access to /dev/vhost-vdpa-* can therefore configure a
queue larger than the device advertises. With vdpa_sim, the worker can
walk descriptors beyond the mapped descriptor ring. KASAN reports a
16-byte out-of-bounds read, corresponding to one vring_desc, in the
vringh IOTLB path:
BUG: KASAN: out-of-bounds in _copy_from_iter
Read of size 16
copy_from_iotlb
copydesc_iotlb
vringh_getdesc_iotlb
vdpasim_net_work
Cache get_vq_num_max() immediately after reset. Some backends derive
it from writable queue-size state, so querying it after SET_NUM may
return the current size instead of the device capability. Invalidate
the cached value before reset so a failed reset leaves SET_NUM
disabled.
For VHOST_SET_VRING_NUM, copy the complete vring state once and use
the same index and size for validation, vq->num, and set_vq_num().
This ensures that validation and use operate on the same copied values. |
| In the Linux kernel, the following vulnerability has been resolved:
vdpa_sim_blk: reject out-of-range sector starts
vdpasim_blk_check_range() logs an invalid start sector but continues
validating the request. The subsequent unsigned capacity subtraction can
underflow and let an out-of-range buffer offset reach the data path.
The invalid offset is used by three request paths. VIRTIO_BLK_T_OUT
copies guest data to blk->buffer + offset through
vringh_iov_pull_iotlb(), causing an out-of-bounds write in
_copy_from_iter() or memcpy(). VIRTIO_BLK_T_IN copies from
blk->buffer + offset to the guest through vringh_iov_push_iotlb(),
causing an out-of-bounds read in _copy_to_iter().
VIRTIO_BLK_T_WRITE_ZEROES passes blk->buffer + offset to memset(),
causing an out-of-bounds write.
Reject starts at or beyond the capacity before the subtraction. Treat the
capacity boundary as invalid because the IN and OUT paths round byte counts
down to sectors for validation but later copy the original byte counts. A
sub-sector request at the capacity boundary would otherwise still access
past the end of the buffer.
I found this bug myself, though the patch was written with AI assistance. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ipv6: Fix UDP length overflow with PMTU discover and big MTU
This commit bounds cork->base.fragsize to IP6_MAX_MTU for UDP sockets to
avoid a possible overflow of UDP length that triggers a WARN in
udp_set_len_short when setsockopt IPV6_MTU_DISCOVER is set to
IPV6_PMTUDISC_DO or IPV6_PMTUDISC_PROBE, and a large packet is sent over
a netdev with an unusually large MTU.
Steps to reproduce (included in the new selftest):
1. Set device MTU bigger than IP6_MAX_MTU. cork->base.fragsize will be
set to that MTU in ip6_setup_cork.
2. Set IPV6_MTU_DISCOVER to IPV6_PMTUDISC_PROBE or IPV6_PMTUDISC_DO. It
lets maxnonfragsize be set to device MTU (cork->fragsize) in
__ip6_append_data, rather than to IP6_MAX_MTU.
3. Send 65528 bytes of payload (+8 bytes of UDP header, +40 bytes of
IPv6 header). Device MTU allows it (it's only one byte bigger than
IP6_MAX_MTU, and the device MTU is bigger than that).
4. The UDP length in the built packet is 65536, which overflows the
16-bit length field and triggers the WARN in udp_set_len_short.
To avoid breaking sending UDP jumbograms over raw IPv6 sockets, limit
the change to UDP sockets only.
The original overflow bug with IPv6 and IPV6_PMTUDISC_DO seems to
predate git history (verified reproduction on 2.6.21), was fixed later,
and then reappeared in commit 427faee167bc ("net: ipv6: introduce
ip6_dst_mtu_maybe_forward"), which is chosen as the Fixes tag here. The
overflow with IPV6_PMTUDISC_PROBE reproduces since its introduction in
commit 628a5c561890 ("[INET]: Add IP(V6)_PMTUDISC_RPOBE"). |
| In the Linux kernel, the following vulnerability has been resolved:
net: hinic: fix mailbox segment buffer overflow
check_mbox_seq_id_and_seg_len() validates that seq_id does not
exceed SEQ_ID_MAX_VAL (42) and seg_len does not exceed
MBOX_SEG_LEN (48). However, this allows the last segment
(seq_id=42) to carry a full 48-byte payload, writing to offset
42*48=2016 for 48 bytes (ending at byte 2064). The receive
buffer is only MBOX_MAX_BUF_SZ (2048) bytes, resulting in a
16-byte heap buffer overflow.
The hinic3 driver already handles this correctly by defining
MBOX_LAST_SEG_MAX_LEN and rejecting the last segment when it
exceeds the remaining buffer space. Apply the same fix to the
hinic driver. |
| In the Linux kernel, the following vulnerability has been resolved:
net/rds: fix tcp stream corruption with large pages
rds_message_map_pages() assigns PAGE_SIZE bytes to every
scatterlist entry, even when total_len ends in a partial page. The RDS
congestion map is defined as 8192 bytes, so on systems with PAGE_SIZE
greater than 8192 the scatterlist maps bytes beyond the end of the
congestion map. RDS-TCP transmits the SG contents according to those
lengths, so the extra bytes become part of the TCP RDS stream and are
interpreted as subsequent RDS message headers, corrupting the stream.
Limit the final scatterlist mapping to the number of bytes remaining.
This has no effect on systems with a 4K page size and allows RDS-TCP to
be used on systems with 16K and larger page sizes.
The RDS selftest, which previously hung on 16K pages, now passes. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix memory corruption from the histogram stacktrace modifier
parse_field() sets HIST_FIELD_FL_STACKTRACE from the ".stacktrace"
modifier before it looks the field name up, and nothing afterwards
checks that the name resolved to a field which holds a stacktrace.
create_hist_field() picks HIST_FIELD_FN_STACK on the strength of the
field pointer alone, which reads a __data_loc word from the record and
follows its low 16 bits as an offset into the same record.
event_hist_trigger() takes the first word there as an entry count and
copies that many longs into a 31 entry array:
n_entries = *stack;
memcpy(entries, ++stack, n_entries * sizeof(unsigned long));
Neither end of that copy is bounded, and the count is whatever the event
holds at the offset, so any field will do:
# cd /sys/kernel/tracing/events/sched/sched_process_fork
# echo 'hist:keys=parent_pid.stacktrace' > trigger
# (true)
BUG: kernel NULL pointer dereference, address: 0000000000000008
RIP: 0010:rb_insert_color+0x18/0x130
timerqueue_linked_add+0x7e/0xd0
enqueue_hrtimer+0x39/0xb0
__hrtimer_run_queues+0x10f/0x1f0
</IRQ>
RIP: 0010:memcpy+0xc/0x30
event_hist_trigger+0x165/0x690
The timer interrupt landed on the rbtree the copy had already run over.
No debug options are needed for this; KASAN reports the same write as an
out-of-bounds read of 13835058055416381440 bytes.
Documentation/trace/histogram.rst already states the rule, "must be a
long[] type", so enforce it once the name has been resolved. Names which
resolve to no field at all, "hitcount.stacktrace" and the common_*
pseudo-fields, are refused for the same reason: they hold no stacktrace
to read. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usbusx2y: fix in04_last array size mismatch with in04_buf
The in04_last array in struct usx2ydev is declared as char[24], but
in04_buf is allocated as sizeof(struct us428_ctls) which is 21 bytes.
In i_usx2y_in04_int(), when ctl_snapshot_last == -2 (initialization
path):
memcpy(usx2y->in04_last, usx2y->in04_buf, sizeof(usx2y->in04_last));
This copies 24 bytes from a 21-byte slab allocation, reading 3 bytes
past the end of the source object.
Introduce a USX2Y_IN04_SIZE constant defined as sizeof(struct
us428_ctls) and use it consistently for the in04_last array, the
in04_buf allocation, the URB transfer length, and the comparison loop,
replacing the bare 24 and 21 literals throughout. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Keep the entry count when the histogram stats allocation fails
print_entries() uses n_entries both as the number of sort entries and as
its own return value, so the -ENOMEM it stores when the stats allocation
fails overwrites the count that the cleanup still needs:
n_entries = tracing_map_sort_entries(map, ...);
if (n_entries < 0)
return n_entries;
...
if (!stats) {
n_entries = -ENOMEM;
goto out;
}
...
out:
tracing_map_destroy_sort_entries(sort_entries, n_entries);
tracing_map_destroy_sort_entries() takes an unsigned int and loops up to
it, so -ENOMEM arrives as 4294967284. It walks an array of at most
map->max_elts pointers and calls destroy_sort_entry(), which dereferences
and frees, on whatever lies past the end.
Reading the hist file of a trigger with a .percent value, with that
allocation forced to fail:
BUG: KASAN: vmalloc-out-of-bounds in tracing_map_destroy_sort_entries+0xa0/0xb0
Read of size 8 at addr ffffc90000045000 by task init/1
tracing_map_destroy_sort_entries+0xa0/0xb0
hist_show+0x6f7/0x1df0
seq_read_iter+0x2b8/0x1190
vfs_read+0x176/0xa40
The buggy address belongs to a 4-page vmalloc region starting at
ffffc90000041000 allocated at tracing_map_sort_entries+0x5c/0xd50
A few pages further the fault is fatal. The registers at the oops confirm
the bound: the loop's end pointer less the array start, over the pointer
size, is 4294967284.
Return the error in a separate variable and leave n_entries holding the
count, the way tracing_map_sort_entries() does on its own error path.
The stats block is only entered for a value carrying .percent or .graph,
which __create_val_field() has rejected since v6.3, so this cannot be
reached in mainline as it stands. It becomes reachable again with
"tracing: hist: let values keep the percent and graph modifiers", so it
should be applied first. |
