| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An “Authentication Bypass Using an Alternate Path or Channel” vulnerability in the OPC UA Server configuration required for B&R mapp Cockpit before 6.0, B&R mapp View before 6.0, B&R mapp Services before 6.0, B&R mapp Motion before 6.0 and B&R mapp Vision before 6.0 may be used by an unauthenticated network-based attacker to cause information disclosure, unintended change of data, or denial of service conditions.
B&R mapp Services is only affected, when mpUserX or mpCodeBox are used in the Automation Studio project. |
| An Authentication Bypass Using an Alternate Path or Channel vulnerability in Juniper Networks Session Smart Router or conductor running with a redundant peer allows a network based attacker to bypass authentication and take full control of the device.
Only routers or conductors that are running in high-availability redundant configurations are affected by this vulnerability.
No other Juniper Networks products or platforms are affected by this issue.
This issue affects:
Session Smart Router:
* All versions before 5.6.15,
* from 6.0 before 6.1.9-lts,
* from 6.2 before 6.2.5-sts.
Session Smart Conductor:
* All versions before 5.6.15,
* from 6.0 before 6.1.9-lts,
* from 6.2 before 6.2.5-sts.
WAN Assurance Router:
* 6.0 versions before 6.1.9-lts,
* 6.2 versions before 6.2.5-sts. |
| Ironic-image is an OpenStack Ironic deployment packaged and configured by Metal3. When the reverse proxy mode is enabled by the `IRONIC_REVERSE_PROXY_SETUP` variable set to `true`, 1) HTTP basic credentials are validated on the HTTPD side in a separate container, not in the Ironic service itself and 2) Ironic listens in host network on a private port 6388 on localhost by default. As a result, when the reverse proxy mode is used, any Pod or local Unix user on the control plane Node can access the Ironic API on the private port without authentication. A similar problem affects Ironic Inspector (`INSPECTOR_REVERSE_PROXY_SETUP` set to `true`), although the attack potential is smaller there. This issue affects operators deploying ironic-image in the reverse proxy mode, which is the recommended mode when TLS is used (also recommended), with the `IRONIC_PRIVATE_PORT` variable unset or set to a numeric value. In this case, an attacker with enough privileges to launch a pod on the control plane with host networking can access Ironic API and use it to modify bare-metal machine, e.g. provision them with a new image or change their BIOS settings. This vulnerability is fixed in 24.1.1. |
| Attackers can bypass the web login authentication process to gain access to the printer's system information and upload malicious drivers to the printer. As for the affected products/models/versions, see the reference URL. |
| Firefly III is a free and open source personal finance manager. In affected versions an MFA bypass in the Firefly III OAuth flow may allow malicious users to bypass the MFA-check. This allows malicious users to use password spraying to gain access to Firefly III data using passwords stolen from other sources. As OAuth applications are easily enumerable using an incrementing id, an attacker could try sign an OAuth application up to a users profile quite easily if they have created one. The attacker would also need to know the victims username and password. This problem has been patched in Firefly III v6.1.17 and up. Users are advised to upgrade. Users unable to upgrade should Use a unique password for their Firefly III instance and store their password securely, i.e. in a password manager. |
| Parse Server is an open source backend that can be deployed to any infrastructure that can run Node.js. A vulnerability in versions prior to 6.5.7 and 7.1.0 allows SQL injection when Parse Server is configured to use the PostgreSQL database. The algorithm to detect SQL injection has been improved in versions 6.5.7 and 7.1.0. No known workarounds are available. |
| The Social Connect plugin for WordPress is vulnerable to authentication bypass in versions up to, and including, 1.2. This is due to insufficient verification on the OpenID server being supplied during the social login through the plugin. This makes it possible for unauthenticated attackers to log in as any existing user on the site, such as an administrator, if they have access to the email. |
| The Pie Register - Social Sites Login (Add on) plugin for WordPress is vulnerable to authentication bypass in versions up to, and including, 1.7.7. This is due to insufficient verification on the user being supplied during a social login through the plugin. This makes it possible for unauthenticated attackers to log in as any existing user on the site, such as an administrator, if they have access to the email. |
| The WP Directorybox Manager plugin for WordPress is vulnerable to authentication bypass in versions up to, and including, 2.5. This is due to incorrect authentication in the 'wp_dp_enquiry_agent_contact_form_submit_callback' function. This makes it possible for unauthenticated attackers to log in as any existing user on the site, such as an administrator, if they have access to the username. |
| An unauthenticated debug port may allow access to the device file system. |
| An issue was discovered in AlertEnterprise Guardian 4.1.14.2.2.1. One can bypass manager approval via isAddedByApprover in a Request%20Building%20Access requestSubmit API call. The vendor has stated that the system is protected by updating to a version equal to or greater than one of the following build numbers: 4.1.12.2.1.19, 4.1.12.5.2.36, 4.1.13.0.60, 4.1.13.2.0.3.39, 4.1.13.2.0.3.41, 4.1.13.2.42, 4.1.13.2.25.44, 4.1.14.0.13, 4.1.14.0.43, 4.1.14.0.48, and 4.1.14.1.5.32. |
| Liferay Portal 7.3.0 through 7.4.3.132, and Liferay DXP 2025.Q1 through 2025.Q1.6, 2024.Q4.0 through 2024.Q4.7, 2024.Q3.1 through 2024.Q3.13, 2024.Q2.0 through 2024.Q2.13, 2024.Q1.1 through 2024.Q1.15, 7.4 GA through update 92 and 7.3 GA through update 36 allows unauthenticated users with valid credentials to bypass the login process by changing the POST method to GET, once the site has MFA enabled. |
| A vulnerability has been identified in SINUMERIK 828D PPU.4 (All versions < V4.95 SP5), SINUMERIK 828D PPU.5 (All versions < V5.25 SP1), SINUMERIK 840D sl (All versions < V4.95 SP5), SINUMERIK MC (All versions < V1.25 SP1), SINUMERIK MC V1.15 (All versions < V1.15 SP5), SINUMERIK ONE (All versions < V6.25 SP1), SINUMERIK ONE V6.15 (All versions < V6.15 SP5). The affected application improperly validates authentication for its VNC access service, allowing access with insufficient password verification.
This could allow an attacker to gain unauthorized remote access and potentially compromise system confidentiality, integrity, or availability. |
| A vulnerability has been identified in RUGGEDCOM ROX MX5000 (All versions), RUGGEDCOM ROX MX5000RE (All versions), RUGGEDCOM ROX RX1400 (All versions), RUGGEDCOM ROX RX1500 (All versions), RUGGEDCOM ROX RX1501 (All versions), RUGGEDCOM ROX RX1510 (All versions), RUGGEDCOM ROX RX1511 (All versions), RUGGEDCOM ROX RX1512 (All versions), RUGGEDCOM ROX RX1524 (All versions), RUGGEDCOM ROX RX1536 (All versions), RUGGEDCOM ROX RX5000 (All versions). Affected devices do not properly limit access through its Built-In-Self-Test (BIST) mode.
This could allow an attacker with physical access to the serial interface to bypass authentication and get access to a root shell on the device. |
| Affected Vertiv products do not properly protect webserver functions that could allow an attacker to bypass authentication. |
| Quest KACE Systems Management Appliance (SMA) 13.0.x before 13.0.385, 13.1.x before 13.1.81, 13.2.x before 13.2.183, 14.0.x before 14.0.341 (Patch 5), and 14.1.x before 14.1.101 (Patch 4) contains a logic flaw in its two-factor authentication implementation that allows authenticated users to bypass TOTP-based 2FA requirements. The vulnerability exists in the 2FA validation process and can be exploited to gain elevated access. |
| Karapace is an open-source implementation of Kafka REST and Schema Registry. Versions 5.0.0 and 5.0.1 contain an authentication bypass vulnerability when configured to use OAuth 2.0 Bearer Token authentication. If a request is sent without an Authorization header, the token validation logic is skipped entirely, allowing an unauthenticated user to read and write to Schema Registry endpoints that should otherwise be protected. This effectively renders the OAuth authentication mechanism ineffective. This issue is fixed in version 5.0.2. |
| Apollo Federation is an architecture for declaratively composing APIs into a unified graph. A vulnerability in versions of Apollo Federation's composition logic prior to 2.9.5, 2.10.4, 2.11.5, and 2.12.1 allowed some queries to Apollo Router to improperly bypass access controls on types/fields. Apollo Federation incorrectly allowed user-defined access control directives on interface types/fields, which could be bypassed by instead querying the implementing object types/fields in Apollo Router via inline fragments, for example. A fix to versions 2.9.5, 2.10.4, 2.11.5, and 2.12.1 of composition logic in Federation now disallows interfaces types and fields to contain user-defined access control directives. Some workarounds are available. Users of Apollo Rover with an unpatched composition version or are using the Apollo Studio build pipeline with Federation version 2.8 or below should manually copy the access control requirements on interface types/fields to each implementing object type/field where appropriate. Do not remove those access control requirements from the interface types/fields, as unpatched Apollo Composition will not automatically generate them in the supergraph schema. Customers not using Apollo Router access control features (`@authenticated`, `@requiresScopes`, or `@policy` directives) or not specifying access control requirements on interface types/fields are not affected and do not need to take action. |
| On 70mai Dash Cam 1S devices, by connecting directly to the dashcam's network and accessing the API on port 80 and RTSP on port 554, an attacker can bypass the device authorization mechanism from the official mobile app that requires a user to physically press on the power button during a connection. |
| The Simpler Checkout plugin for WordPress is vulnerable to Authentication Bypass in versions 0.7.0 to 1.1.9. This is due to the plugin not properly verifying a user's identity prior to logging them in as an admin through the simplerwc_woocommerce_order_created() function. This makes it possible for unauthenticated attackers to log in as other users based on their order ID, which can be an administrator if a site admin has placed a test order. |
