Export limit exceeded: 403128 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (371 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-40933 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iio: temperature: mlx90635: Fix ERR_PTR dereference in mlx90635_probe() When devm_regmap_init_i2c() fails, regmap_ee could be error pointer, instead of checking for IS_ERR(regmap_ee), regmap is checked which looks like a copy paste error. | ||||
| CVE-2024-38616 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: carl9170: re-fix fortified-memset warning The carl9170_tx_release() function sometimes triggers a fortified-memset warning in my randconfig builds: In file included from include/linux/string.h:254, from drivers/net/wireless/ath/carl9170/tx.c:40: In function 'fortify_memset_chk', inlined from 'carl9170_tx_release' at drivers/net/wireless/ath/carl9170/tx.c:283:2, inlined from 'kref_put' at include/linux/kref.h:65:3, inlined from 'carl9170_tx_put_skb' at drivers/net/wireless/ath/carl9170/tx.c:342:9: include/linux/fortify-string.h:493:25: error: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror=attribute-warning] 493 | __write_overflow_field(p_size_field, size); Kees previously tried to avoid this by using memset_after(), but it seems this does not fully address the problem. I noticed that the memset_after() here is done on a different part of the union (status) than the original cast was from (rate_driver_data), which may confuse the compiler. Unfortunately, the memset_after() trick does not work on driver_rates[] because that is part of an anonymous struct, and I could not get struct_group() to do this either. Using two separate memset() calls on the two members does address the warning though. | ||||
| CVE-2024-36888 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 6.2 Medium |
| In the Linux kernel, the following vulnerability has been resolved: workqueue: Fix selection of wake_cpu in kick_pool() With cpu_possible_mask=0-63 and cpu_online_mask=0-7 the following kernel oops was observed: smp: Bringing up secondary CPUs ... smp: Brought up 1 node, 8 CPUs Unable to handle kernel pointer dereference in virtual kernel address space Failing address: 0000000000000000 TEID: 0000000000000803 [..] Call Trace: arch_vcpu_is_preempted+0x12/0x80 select_idle_sibling+0x42/0x560 select_task_rq_fair+0x29a/0x3b0 try_to_wake_up+0x38e/0x6e0 kick_pool+0xa4/0x198 __queue_work.part.0+0x2bc/0x3a8 call_timer_fn+0x36/0x160 __run_timers+0x1e2/0x328 __run_timer_base+0x5a/0x88 run_timer_softirq+0x40/0x78 __do_softirq+0x118/0x388 irq_exit_rcu+0xc0/0xd8 do_ext_irq+0xae/0x168 ext_int_handler+0xbe/0xf0 psw_idle_exit+0x0/0xc default_idle_call+0x3c/0x110 do_idle+0xd4/0x158 cpu_startup_entry+0x40/0x48 rest_init+0xc6/0xc8 start_kernel+0x3c4/0x5e0 startup_continue+0x3c/0x50 The crash is caused by calling arch_vcpu_is_preempted() for an offline CPU. To avoid this, select the cpu with cpumask_any_and_distribute() to mask __pod_cpumask with cpu_online_mask. In case no cpu is left in the pool, skip the assignment. tj: This doesn't fully fix the bug as CPUs can still go down between picking the target CPU and the wake call. Fixing that likely requires adding cpu_online() test to either the sched or s390 arch code. However, regardless of how that is fixed, workqueue shouldn't be picking a CPU which isn't online as that would result in unpredictable and worse behavior. | ||||
| CVE-2024-26746 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: Ensure safe user copy of completion record If CONFIG_HARDENED_USERCOPY is enabled, copying completion record from event log cache to user triggers a kernel bug. [ 1987.159822] usercopy: Kernel memory exposure attempt detected from SLUB object 'dsa0' (offset 74, size 31)! [ 1987.170845] ------------[ cut here ]------------ [ 1987.176086] kernel BUG at mm/usercopy.c:102! [ 1987.180946] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI [ 1987.186866] CPU: 17 PID: 528 Comm: kworker/17:1 Not tainted 6.8.0-rc2+ #5 [ 1987.194537] Hardware name: Intel Corporation AvenueCity/AvenueCity, BIOS BHSDCRB1.86B.2492.D03.2307181620 07/18/2023 [ 1987.206405] Workqueue: wq0.0 idxd_evl_fault_work [idxd] [ 1987.212338] RIP: 0010:usercopy_abort+0x72/0x90 [ 1987.217381] Code: 58 65 9c 50 48 c7 c2 17 85 61 9c 57 48 c7 c7 98 fd 6b 9c 48 0f 44 d6 48 c7 c6 b3 08 62 9c 4c 89 d1 49 0f 44 f3 e8 1e 2e d5 ff <0f> 0b 49 c7 c1 9e 42 61 9c 4c 89 cf 4d 89 c8 eb a9 66 66 2e 0f 1f [ 1987.238505] RSP: 0018:ff62f5cf20607d60 EFLAGS: 00010246 [ 1987.244423] RAX: 000000000000005f RBX: 000000000000001f RCX: 0000000000000000 [ 1987.252480] RDX: 0000000000000000 RSI: ffffffff9c61429e RDI: 00000000ffffffff [ 1987.260538] RBP: ff62f5cf20607d78 R08: ff2a6a89ef3fffe8 R09: 00000000fffeffff [ 1987.268595] R10: ff2a6a89eed00000 R11: 0000000000000003 R12: ff2a66934849c89a [ 1987.276652] R13: 0000000000000001 R14: ff2a66934849c8b9 R15: ff2a66934849c899 [ 1987.284710] FS: 0000000000000000(0000) GS:ff2a66b22fe40000(0000) knlGS:0000000000000000 [ 1987.293850] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1987.300355] CR2: 00007fe291a37000 CR3: 000000010fbd4005 CR4: 0000000000f71ef0 [ 1987.308413] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1987.316470] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 [ 1987.324527] PKRU: 55555554 [ 1987.327622] Call Trace: [ 1987.330424] <TASK> [ 1987.332826] ? show_regs+0x6e/0x80 [ 1987.336703] ? die+0x3c/0xa0 [ 1987.339988] ? do_trap+0xd4/0xf0 [ 1987.343662] ? do_error_trap+0x75/0xa0 [ 1987.347922] ? usercopy_abort+0x72/0x90 [ 1987.352277] ? exc_invalid_op+0x57/0x80 [ 1987.356634] ? usercopy_abort+0x72/0x90 [ 1987.360988] ? asm_exc_invalid_op+0x1f/0x30 [ 1987.365734] ? usercopy_abort+0x72/0x90 [ 1987.370088] __check_heap_object+0xb7/0xd0 [ 1987.374739] __check_object_size+0x175/0x2d0 [ 1987.379588] idxd_copy_cr+0xa9/0x130 [idxd] [ 1987.384341] idxd_evl_fault_work+0x127/0x390 [idxd] [ 1987.389878] process_one_work+0x13e/0x300 [ 1987.394435] ? __pfx_worker_thread+0x10/0x10 [ 1987.399284] worker_thread+0x2f7/0x420 [ 1987.403544] ? _raw_spin_unlock_irqrestore+0x2b/0x50 [ 1987.409171] ? __pfx_worker_thread+0x10/0x10 [ 1987.414019] kthread+0x107/0x140 [ 1987.417693] ? __pfx_kthread+0x10/0x10 [ 1987.421954] ret_from_fork+0x3d/0x60 [ 1987.426019] ? __pfx_kthread+0x10/0x10 [ 1987.430281] ret_from_fork_asm+0x1b/0x30 [ 1987.434744] </TASK> The issue arises because event log cache is created using kmem_cache_create() which is not suitable for user copy. Fix the issue by creating event log cache with kmem_cache_create_usercopy(), ensuring safe user copy. | ||||
| CVE-2024-26705 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: parisc: BTLB: Fix crash when setting up BTLB at CPU bringup When using hotplug and bringing up a 32-bit CPU, ask the firmware about the BTLB information to set up the static (block) TLB entries. For that write access to the static btlb_info struct is needed, but since it is marked __ro_after_init the kernel segfaults with missing write permissions. Fix the crash by dropping the __ro_after_init annotation. | ||||
| CVE-2024-26693 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: fix a crash when we run out of stations A DoS tool that injects loads of authentication frames made our AP crash. The iwl_mvm_is_dup() function couldn't find the per-queue dup_data which was not allocated. The root cause for that is that we ran out of stations in the firmware and we didn't really add the station to the firmware, yet we didn't return an error to mac80211. Mac80211 was thinking that we have the station and because of that, sta_info::uploaded was set to 1. This allowed ieee80211_find_sta_by_ifaddr() to return a valid station object, but that ieee80211_sta didn't have any iwl_mvm_sta object initialized and that caused the crash mentioned earlier when we got Rx on that station. | ||||
| CVE-2024-26684 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: stmmac: xgmac: fix handling of DPP safety error for DMA channels Commit 56e58d6c8a56 ("net: stmmac: Implement Safety Features in XGMAC core") checks and reports safety errors, but leaves the Data Path Parity Errors for each channel in DMA unhandled at all, lead to a storm of interrupt. Fix it by checking and clearing the DMA_DPP_Interrupt_Status register. | ||||
| CVE-2024-26683 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: detect stuck ECSA element in probe resp We recently added some validation that we don't try to connect to an AP that is currently in a channel switch process, since that might want the channel to be quiet or we might not be able to connect in time to hear the switching in a beacon. This was in commit c09c4f31998b ("wifi: mac80211: don't connect to an AP while it's in a CSA process"). However, we promptly got a report that this caused new connection failures, and it turns out that the AP that we now cannot connect to is permanently advertising an extended channel switch announcement, even with quiet. The AP in question was an Asus RT-AC53, with firmware 3.0.0.4.380_10760-g21a5898. As a first step, attempt to detect that we're dealing with such a situation, so mac80211 can use this later. | ||||
| CVE-2024-26682 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: improve CSA/ECSA connection refusal As mentioned in the previous commit, we pretty quickly found that some APs have ECSA elements stuck in their probe response, so using that to not attempt to connect while CSA is happening we never connect to such an AP. Improve this situation by checking more carefully and ignoring the ECSA if cfg80211 has previously detected the ECSA element being stuck in the probe response. Additionally, allow connecting to an AP that's switching to a channel it's already using, unless it's using quiet mode. In this case, we may just have to adjust bandwidth later. If it's actually switching channels, it's better not to try to connect in the middle of that. | ||||
| CVE-2024-26674 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: x86/lib: Revert to _ASM_EXTABLE_UA() for {get,put}_user() fixups During memory error injection test on kernels >= v6.4, the kernel panics like below. However, this issue couldn't be reproduced on kernels <= v6.3. mce: [Hardware Error]: CPU 296: Machine Check Exception: f Bank 1: bd80000000100134 mce: [Hardware Error]: RIP 10:<ffffffff821b9776> {__get_user_nocheck_4+0x6/0x20} mce: [Hardware Error]: TSC 411a93533ed ADDR 346a8730040 MISC 86 mce: [Hardware Error]: PROCESSOR 0:a06d0 TIME 1706000767 SOCKET 1 APIC 211 microcode 80001490 mce: [Hardware Error]: Run the above through 'mcelog --ascii' mce: [Hardware Error]: Machine check: Data load in unrecoverable area of kernel Kernel panic - not syncing: Fatal local machine check The MCA code can recover from an in-kernel #MC if the fixup type is EX_TYPE_UACCESS, explicitly indicating that the kernel is attempting to access userspace memory. However, if the fixup type is EX_TYPE_DEFAULT the only thing that is raised for an in-kernel #MC is a panic. ex_handler_uaccess() would warn if users gave a non-canonical addresses (with bit 63 clear) to {get, put}_user(), which was unexpected. Therefore, commit b19b74bc99b1 ("x86/mm: Rework address range check in get_user() and put_user()") replaced _ASM_EXTABLE_UA() with _ASM_EXTABLE() for {get, put}_user() fixups. However, the new fixup type EX_TYPE_DEFAULT results in a panic. Commit 6014bc27561f ("x86-64: make access_ok() independent of LAM") added the check gp_fault_address_ok() right before the WARN_ONCE() in ex_handler_uaccess() to not warn about non-canonical user addresses due to LAM. With that in place, revert back to _ASM_EXTABLE_UA() for {get,put}_user() exception fixups in order to be able to handle in-kernel MCEs correctly again. [ bp: Massage commit message. ] | ||||
| CVE-2024-26673 | 3 Debian, Linux, Redhat | 5 Debian Linux, Linux Kernel, Enterprise Linux and 2 more | 2025-05-04 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_ct: sanitize layer 3 and 4 protocol number in custom expectations - Disallow families other than NFPROTO_{IPV4,IPV6,INET}. - Disallow layer 4 protocol with no ports, since destination port is a mandatory attribute for this object. | ||||
| CVE-2024-26667 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/msm/dpu: check for valid hw_pp in dpu_encoder_helper_phys_cleanup The commit 8b45a26f2ba9 ("drm/msm/dpu: reserve cdm blocks for writeback in case of YUV output") introduced a smatch warning about another conditional block in dpu_encoder_helper_phys_cleanup() which had assumed hw_pp will always be valid which may not necessarily be true. Lets fix the other conditional block by making sure hw_pp is valid before dereferencing it. Patchwork: https://patchwork.freedesktop.org/patch/574878/ | ||||
| CVE-2022-49411 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bfq: Make sure bfqg for which we are queueing requests is online Bios queued into BFQ IO scheduler can be associated with a cgroup that was already offlined. This may then cause insertion of this bfq_group into a service tree. But this bfq_group will get freed as soon as last bio associated with it is completed leading to use after free issues for service tree users. Fix the problem by making sure we always operate on online bfq_group. If the bfq_group associated with the bio is not online, we pick the first online parent. | ||||
| CVE-2022-49004 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: riscv: Sync efi page table's kernel mappings before switching The EFI page table is initially created as a copy of the kernel page table. With VMAP_STACK enabled, kernel stacks are allocated in the vmalloc area: if the stack is allocated in a new PGD (one that was not present at the moment of the efi page table creation or not synced in a previous vmalloc fault), the kernel will take a trap when switching to the efi page table when the vmalloc kernel stack is accessed, resulting in a kernel panic. Fix that by updating the efi kernel mappings before switching to the efi page table. | ||||
| CVE-2022-48974 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: conntrack: fix using __this_cpu_add in preemptible Currently in nf_conntrack_hash_check_insert(), when it fails in nf_ct_ext_valid_pre/post(), NF_CT_STAT_INC() will be called in the preemptible context, a call trace can be triggered: BUG: using __this_cpu_add() in preemptible [00000000] code: conntrack/1636 caller is nf_conntrack_hash_check_insert+0x45/0x430 [nf_conntrack] Call Trace: <TASK> dump_stack_lvl+0x33/0x46 check_preemption_disabled+0xc3/0xf0 nf_conntrack_hash_check_insert+0x45/0x430 [nf_conntrack] ctnetlink_create_conntrack+0x3cd/0x4e0 [nf_conntrack_netlink] ctnetlink_new_conntrack+0x1c0/0x450 [nf_conntrack_netlink] nfnetlink_rcv_msg+0x277/0x2f0 [nfnetlink] netlink_rcv_skb+0x50/0x100 nfnetlink_rcv+0x65/0x144 [nfnetlink] netlink_unicast+0x1ae/0x290 netlink_sendmsg+0x257/0x4f0 sock_sendmsg+0x5f/0x70 This patch is to fix it by changing to use NF_CT_STAT_INC_ATOMIC() for nf_ct_ext_valid_pre/post() check in nf_conntrack_hash_check_insert(), as well as nf_ct_ext_valid_post() in __nf_conntrack_confirm(). Note that nf_ct_ext_valid_pre() check in __nf_conntrack_confirm() is safe to use NF_CT_STAT_INC(), as it's under local_bh_disable(). | ||||
| CVE-2022-48897 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: arm64/mm: fix incorrect file_map_count for invalid pmd The page table check trigger BUG_ON() unexpectedly when split hugepage: ------------[ cut here ]------------ kernel BUG at mm/page_table_check.c:119! Internal error: Oops - BUG: 00000000f2000800 [#1] SMP Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 7 PID: 210 Comm: transhuge-stres Not tainted 6.1.0-rc3+ #748 Hardware name: linux,dummy-virt (DT) pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : page_table_check_set.isra.0+0x398/0x468 lr : page_table_check_set.isra.0+0x1c0/0x468 [...] Call trace: page_table_check_set.isra.0+0x398/0x468 __page_table_check_pte_set+0x160/0x1c0 __split_huge_pmd_locked+0x900/0x1648 __split_huge_pmd+0x28c/0x3b8 unmap_page_range+0x428/0x858 unmap_single_vma+0xf4/0x1c8 zap_page_range+0x2b0/0x410 madvise_vma_behavior+0xc44/0xe78 do_madvise+0x280/0x698 __arm64_sys_madvise+0x90/0xe8 invoke_syscall.constprop.0+0xdc/0x1d8 do_el0_svc+0xf4/0x3f8 el0_svc+0x58/0x120 el0t_64_sync_handler+0xb8/0xc0 el0t_64_sync+0x19c/0x1a0 [...] On arm64, pmd_leaf() will return true even if the pmd is invalid due to pmd_present_invalid() check. So in pmdp_invalidate() the file_map_count will not only decrease once but also increase once. Then in set_pte_at(), the file_map_count increase again, and so trigger BUG_ON() unexpectedly. Add !pmd_present_invalid() check in pmd_user_accessible_page() to fix the problem. | ||||
| CVE-2022-48808 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: dsa: fix panic when DSA master device unbinds on shutdown Rafael reports that on a system with LX2160A and Marvell DSA switches, if a reboot occurs while the DSA master (dpaa2-eth) is up, the following panic can be seen: systemd-shutdown[1]: Rebooting. Unable to handle kernel paging request at virtual address 00a0000800000041 [00a0000800000041] address between user and kernel address ranges Internal error: Oops: 96000004 [#1] PREEMPT SMP CPU: 6 PID: 1 Comm: systemd-shutdow Not tainted 5.16.5-00042-g8f5585009b24 #32 pc : dsa_slave_netdevice_event+0x130/0x3e4 lr : raw_notifier_call_chain+0x50/0x6c Call trace: dsa_slave_netdevice_event+0x130/0x3e4 raw_notifier_call_chain+0x50/0x6c call_netdevice_notifiers_info+0x54/0xa0 __dev_close_many+0x50/0x130 dev_close_many+0x84/0x120 unregister_netdevice_many+0x130/0x710 unregister_netdevice_queue+0x8c/0xd0 unregister_netdev+0x20/0x30 dpaa2_eth_remove+0x68/0x190 fsl_mc_driver_remove+0x20/0x5c __device_release_driver+0x21c/0x220 device_release_driver_internal+0xac/0xb0 device_links_unbind_consumers+0xd4/0x100 __device_release_driver+0x94/0x220 device_release_driver+0x28/0x40 bus_remove_device+0x118/0x124 device_del+0x174/0x420 fsl_mc_device_remove+0x24/0x40 __fsl_mc_device_remove+0xc/0x20 device_for_each_child+0x58/0xa0 dprc_remove+0x90/0xb0 fsl_mc_driver_remove+0x20/0x5c __device_release_driver+0x21c/0x220 device_release_driver+0x28/0x40 bus_remove_device+0x118/0x124 device_del+0x174/0x420 fsl_mc_bus_remove+0x80/0x100 fsl_mc_bus_shutdown+0xc/0x1c platform_shutdown+0x20/0x30 device_shutdown+0x154/0x330 __do_sys_reboot+0x1cc/0x250 __arm64_sys_reboot+0x20/0x30 invoke_syscall.constprop.0+0x4c/0xe0 do_el0_svc+0x4c/0x150 el0_svc+0x24/0xb0 el0t_64_sync_handler+0xa8/0xb0 el0t_64_sync+0x178/0x17c It can be seen from the stack trace that the problem is that the deregistration of the master causes a dev_close(), which gets notified as NETDEV_GOING_DOWN to dsa_slave_netdevice_event(). But dsa_switch_shutdown() has already run, and this has unregistered the DSA slave interfaces, and yet, the NETDEV_GOING_DOWN handler attempts to call dev_close_many() on those slave interfaces, leading to the problem. The previous attempt to avoid the NETDEV_GOING_DOWN on the master after dsa_switch_shutdown() was called seems improper. Unregistering the slave interfaces is unnecessary and unhelpful. Instead, after the slaves have stopped being uppers of the DSA master, we can now reset to NULL the master->dsa_ptr pointer, which will make DSA start ignoring all future notifier events on the master. | ||||
| CVE-2023-52634 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix disable_otg_wa logic [Why] When switching to another HDMI mode, we are unnecesarilly disabling/enabling FIFO causing both HPO and DIG registers to be set at the same time when only HPO is supposed to be set. This can lead to a system hang the next time we change refresh rates as there are cases when we don't disable OTG/FIFO but FIFO is enabled when it isn't supposed to be. [How] Removing the enable/disable FIFO entirely. | ||||
| CVE-2023-52495 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: soc: qcom: pmic_glink_altmode: fix port sanity check The PMIC GLINK altmode driver currently supports at most two ports. Fix the incomplete port sanity check on notifications to avoid accessing and corrupting memory beyond the port array if we ever get a notification for an unsupported port. | ||||
| CVE-2025-21860 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: mm/zswap: fix inconsistency when zswap_store_page() fails Commit b7c0ccdfbafd ("mm: zswap: support large folios in zswap_store()") skips charging any zswap entries when it failed to zswap the entire folio. However, when some base pages are zswapped but it failed to zswap the entire folio, the zswap operation is rolled back. When freeing zswap entries for those pages, zswap_entry_free() uncharges the zswap entries that were not previously charged, causing zswap charging to become inconsistent. This inconsistency triggers two warnings with following steps: # On a machine with 64GiB of RAM and 36GiB of zswap $ stress-ng --bigheap 2 # wait until the OOM-killer kills stress-ng $ sudo reboot The two warnings are: in mm/memcontrol.c:163, function obj_cgroup_release(): WARN_ON_ONCE(nr_bytes & (PAGE_SIZE - 1)); in mm/page_counter.c:60, function page_counter_cancel(): if (WARN_ONCE(new < 0, "page_counter underflow: %ld nr_pages=%lu\n", new, nr_pages)) zswap_stored_pages also becomes inconsistent in the same way. As suggested by Kanchana, increment zswap_stored_pages and charge zswap entries within zswap_store_page() when it succeeds. This way, zswap_entry_free() will decrement the counter and uncharge the entries when it failed to zswap the entire folio. While this could potentially be optimized by batching objcg charging and incrementing the counter, let's focus on fixing the bug this time and leave the optimization for later after some evaluation. After resolving the inconsistency, the warnings disappear. [42.hyeyoo@gmail.com: refactor zswap_store_page()] | ||||