| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| When authentication caching is enabled on DefaultLdapRealm, after a user logs in successfully once, subsequent logins for that user succeed with any password.
A cached authentication skips the LDAP bind, and the AllowAllCredentialsMatcher installed by default in DefaultLdapRealm accepts any credentials, allowing an attacker who knows a valid username to authenticate as that user.
This issue affects all Apache Shiro versions through 3.0.0, only when using DefaultLdapRealm (or JndiLdapRealm) with authenticationCachingEnabled set to true, which is not the default.
Mitigation: Upgrade to version 3.0.1 or later, which fixes the issue by no longer installing AllowAllCredentialsMatcher by default.
Alternatively, disable authentication caching on the LDAP realm (this is the default), or configure a credentials matcher, such as SimpleCredentialsMatcher, that verifies credentials against the cached authentication info. |
| create-ecdh is a browserifiable implementation of Node.js crypto.createECDH. In versions 4.0.4 and below, the JavaScript implementation (browser.js, used by browser bundlers and on Node.js versions without a working native crypto.createECDH) did not validate peer public keys in ECDH.prototype.computeSecret or ECDH.prototype.setPublicKey. The peer point was multiplied by the local private key without checking that it was on the configured curve or in its prime-order subgroup. An attacker who can submit public keys to a party that reuses a static private key can perform an invalid-curve or small-subgroup attack and recover the private key modulo small factors, eventually recovering the full key via the Chinese Remainder Theorem. For the ed25519 and curve25519 curves, low-order points were also accepted, which could force a predictable shared secret. On modern Node.js, create-ecdh re-exports the native implementation, which is not affected. This issue is fixed in version 4.0.5. |
| Keep 0.34.10 through 0.55.0 contains a blind SQL injection vulnerability in its CEL-to-SQL converter, which inserts bracket-indexed JSON keys from CEL filters unescaped into JSON path expressions for SQLite, PostgreSQL, and MySQL. Authenticated users with read:alert permission can submit crafted CEL expressions to /alerts/query or the cel parameter of /incidents, using result counts as a boolean oracle to extract other tenants' alerts and password hashes. |
| Dromara free-fs 2.0.1 through 2.3.1 contains a missing authentication vulnerability in FileStreamController.preview that allows unauthenticated attackers to download stored files. Attackers who obtain a file ID from share listings or preview links can request /api/file/stream/preview/{fileId} to download any user's or workspace's files. |
| ragent 1.0.0 through 1.1.0 contains a missing authorization vulnerability in RagTraceController that allows any logged-in user to view all users' RAG traces. Attackers can page through /rag/traces/runs and related node endpoints to read other users' usernames, user ids, conversation ids, questions, and per-node execution details. |
| SurveyKing 1.12.0 through 1.13.2 contains an authorization bypass in the linked survey feature that fails to verify the referenced linkSurveyId belongs to the caller's own project. Authenticated attackers can point a linked option at another user's survey so that loadLinkResult and updateLinkSurveyAnswer read, rewrite, or create responses in that survey. |
| paicoding 1.0.3 contains a missing authorization vulnerability in the ArticleRestController article detail endpoint that allows unauthenticated attackers to read restricted articles. Attackers can enumerate article IDs via GET /article/api/data/detail/{articleId} to retrieve full content of paid, login-only, member-only and draft articles. |
| paicoding from commit b8206b9 through commit 903adce uses predictable credentials for accounts created via ZSXQ login, because loginByZsxq derives both the username and password solely from the member's ZSXQ number. Unauthenticated attackers can read that number from the victim's /user/{userId} profile page, compute the credentials, and log in via /login/username to take over the account. |
| In Eclipse BaSyx Go Components versions up to and including 1.1.3, ABAC-enabled deployments match `ROUTE` access rules against the fully decoded request path, while the router routes on the raw, still encoded path. An encoded slash (`%2F`) inside a path value is a segment separator for the access check but part of the value for the router, so a request can match a narrow `ROUTE` rule while the handler returns a different, larger resource.
An authenticated caller whose rules grant READ only on parts of a resource can therefore read the whole resource. In the DPP API, a rule such as `/v1/dpps/*/elements/*`, meant to grant only passport elements, also grants the complete passport whose identifier contains `/elements/`. In the Submodel Repository, AAS Repository and AAS Environment, a rule such as `/submodels/*/submodel-elements/*/attachment`, meant to grant only file attachments, also grants the complete element whose stored idShort contains `%2F`.
The issue is fixed in Eclipse BaSyx Go Components v1.1.4. |
| Use of hard-coded credentials (CWE-798) on the 1300 communications board in DJI AeroScope Mobile (TP703) firmware 03.00.00.26, with 1300 communications board firmware 02.00.07.12 through 02.00.08.40, allows an attacker with physical access to the board's serial console to log in as root. The same password hash is present on every unit and uses DES crypt, so the password can be recovered offline from the distributed firmware. No network login service accepts this password by default. Confirmed on a physical device.
NOTE: This vulnerability only affects products that are no longer supported by the maintainer. DJI has discontinued AeroScope Mobile and no fixed firmware is available. |
| OS command injection (CWE-78) in the network-configuration handling of the management service (uavmonitor_usbv1) of the 1300 communications board in DJI AeroScope Mobile (TP703) firmware 03.00.00.26, with 1300 communications board firmware 02.00.07.12 through 02.00.08.40, allows an unauthenticated attacker on the local network to execute arbitrary commands as root. Configuration values that can be written without authentication over the management interface are inserted unquoted into shell commands. Exploitation requires network access to TCP port 16000 on the board and that the unit is not connected to another controlling host. The injected command persists across reboots. Confirmed on a physical device.
NOTE: This vulnerability only affects products that are no longer supported by the maintainer. DJI has discontinued AeroScope Mobile and no fixed firmware is available. |
| Missing authentication for a critical function (CWE-306) in the management service (uavmonitor_usbv1) of the 1300 communications board in DJI AeroScope Mobile (TP703) firmware 03.00.00.26, with 1300 communications board firmware 02.00.07.12 through 02.00.08.40, allows an unauthenticated attacker on the local network to read device information, such as the serial number, MAC address, IP address and radio configuration, and to change configuration settings. The service accepts commands in DJI's proprietary DUML protocol without any authentication. Exploitation requires network access to TCP port 16000 on the board and that the unit is not connected to another controlling host. The same commands are also accepted over the USB operator port. Confirmed on a physical device.
NOTE: This vulnerability only affects products that are no longer supported by the maintainer. DJI has discontinued AeroScope Mobile and no fixed firmware is available. |
| In gittuf 0.10.0 through 0.15.0, when a minimum threshold global rule and a policy rule protect the same namespace, verification gives the global rule's check over all trusted users in the policy precedence over the policy rule's own authorized users. A user listed in the policy file but not authorized by the policy rule, or fewer users than the rule's threshold, can make changes to the protected namespace that pass verification. |
| In gittuf 0.4.0 through 0.16.0, when a policy update appears within the range of reference state log entries being verified, verification checks only the root of trust signatures of the new policy and not the signatures of its other metadata (rule files). A user trusted to push to the repository who bypasses gittuf policy apply and writes the policy reference and reference state log directly can make an invalid policy apply during verification, weakening or strengthening the rules for later changes. The update is still recorded in the reference state log. |
| In gittuf 0.10.0 through 0.17.0, the verification workflow does not load policy updates that are propagated from an upstream (controller) repository and recorded in the reference state log after the first entry being verified. Only the propagated policy in effect at the start of verification is applied, so later controller changes to global rules, such as threshold requirements and force-push blocks, are ignored and changes that these rules should block pass verification. |
| In gittuf before 0.18.0, verification of file protection rules uses the quoted, escaped pathnames that Git prints by default for files with special characters (for example non-ASCII characters) instead of the raw paths. Such paths do not match patterns like file:internal/*, so the files are treated as unprotected, and a user who is not authorized by a file protection rule can change a protected file whose name contains special characters and still pass verification. |
| Flowise through 3.1.4 contains a server-side request forgery vulnerability that allows authenticated attackers with chatflows or agentflows create/update permissions to bypass the Custom Function sandbox's SSRF protection by requiring a module subpath inside an allowlisted package, such as axios/dist/node/axios.cjs or node-fetch/lib/index.js, which evades the vm2 mock table and returns an unwrapped HTTP client that skips the checkDenyList validation. Attackers can issue arbitrary GET and POST requests with attacker-controlled bodies via POST /api/v1/node-custom-function to reach loopback and internal-network addresses or the cloud metadata endpoint, enabling network mapping, credential disclosure, and state changes on internal services. |
| In Eclipse AAS4J before 3.0.1, `XmlSchemaValidator.validateSchema()` (and `AASXValidator.validateSchema()`, which calls it) validates untrusted XML with a default JAXP `Validator` that resolves external DTDs and external entities. An attacker who supplies a crafted AAS XML document or AASX package can read local files from the host, send their contents out-of-band to an attacker-controlled server, and make the validating process send arbitrary outbound requests (SSRF). Validation still returns no errors.
Details:
- Vulnerable code: `dataformat-xml/src/main/java/org/eclipse/digitaltwin/aas4j/v3/dataformat/xml/XmlSchemaValidator.java`. `schema.newValidator().validate(new StreamSource(...))` runs without `ACCESS_EXTERNAL_DTD` / `ACCESS_EXTERNAL_SCHEMA` restrictions and without `disallow-doctype-decl`.
- Second entry point: `dataformat-aasx/src/main/java/org/eclipse/digitaltwin/aas4j/v3/dataformat/aasx/AASXValidator.java`. The AAS XML part of an `.aasx` package is passed unchanged to the vulnerable validator.
- `XmlDeserializer` (Jackson/Woodstox) is not affected, because DTD support is disabled by default there.
- Present since the initial import of the code base (commit `cc9da52`).
- Fix: harden the validator by setting `ACCESS_EXTERNAL_DTD` and `ACCESS_EXTERNAL_SCHEMA` to `""` and rejecting `DOCTYPE` declarations. The bundled `AAS.xsd` does not need DTDs, so no functionality is lost. |
| A Ruby object-document mapper does not apply its automatic field-level encryption configuration to certain fields when the data model uses class inheritance. Values the application designated for encryption are written to the database in readable form without any error or warning. A database account holding only read access to the application's collections, and no access to the encryption key store, may obtain those values. |
| Progressive Robot hMailServer 6.3.4 through 6.3.7, with a MySQL or MariaDB database, TlsMode=verify-full and no TlsCaFile, does not verify the database server's certificate's issuer or name when the connection is one that MariaDB Connector/C treats as local - Server= set to 127.0.0.1, ::1 or localhost (on Linux a Unix socket), to . on Windows (a named pipe), or to a comma-separated list of servers that holds such an element - which allows a local attacker who can stand in for the database server, for example by listening on its port while it is stopped or restarting, to receive the database sign-in, the password included, and to read and modify the traffic between hMailServer and its database. hMailServer applied verify-full by turning the client's certificate verification on without a CA file, but MariaDB Connector/C 3.4.1 and later, on a connection they treat as local and with no CA file, accept any certificate within its validity period that is self-signed or sent with its own root, for any name (Connector/C 3.4.2 to 3.4.10 also one whose issuer they cannot find), so the client accepted the certificate an impostor made, asked no proof of the password and allowed a switch to an authentication method that sends the password unhashed, while hmailserver --check-database said the certificate had been checked against the system's trust store and the application log that it had been checked. The Windows builds bundle Connector/C 3.4.9 (6.3.4 to 6.3.6) and 3.4.11 (6.3.7); on Linux the distribution's client is used, and Connector/C 3.3 and 3.4.0 and Oracle's MySQL client are not affected. The configuration is not the default: TlsMode defaults to prefer, which checks no certificate. |