| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| When calling bson_utf8_validate on some inputs a loop with an exit condition that cannot be reached may occur, i.e. an infinite loop. This issue affects All MongoDB C Driver versions prior to versions 1.25.0. |
| The OWASP ModSecurity Core Rule Set (CRS) is affected by a response body bypass to sequentially exfiltrate small and undetectable sections of data by repeatedly submitting an HTTP Range header field with a small byte range. A restricted resource, access to which would ordinarily be detected, may be exfiltrated from the backend, despite being protected by a web application firewall that uses CRS. Short subsections of a restricted resource may bypass pattern matching techniques and allow undetected access. The legacy CRS versions 3.0.x and 3.1.x are affected, as well as the currently supported versions 3.2.1 and 3.3.2. Integrators and users are advised to upgrade to 3.2.2 and 3.3.3 respectively and to configure a CRS paranoia level of 3 or higher. |
| The OWASP ModSecurity Core Rule Set (CRS) is affected by a partial rule set bypass for HTTP multipart requests by submitting a payload that uses a character encoding scheme via the Content-Type or the deprecated Content-Transfer-Encoding multipart MIME header fields that will not be decoded and inspected by the web application firewall engine and the rule set. The multipart payload will therefore bypass detection. A vulnerable backend that supports these encoding schemes can potentially be exploited. The legacy CRS versions 3.0.x and 3.1.x are affected, as well as the currently supported versions 3.2.1 and 3.3.2. Integrators and users are advised upgrade to 3.2.2 and 3.3.3 respectively. The mitigation against these vulnerabilities depends on the installation of the latest ModSecurity version (v2.9.6 / v3.0.8). |
| The OWASP ModSecurity Core Rule Set (CRS) is affected by a partial rule set bypass by submitting a specially crafted HTTP Content-Type header field that indicates multiple character encoding schemes. A vulnerable back-end can potentially be exploited by declaring multiple Content-Type "charset" names and therefore bypassing the configurable CRS Content-Type header "charset" allow list. An encoded payload can bypass CRS detection this way and may then be decoded by the backend. The legacy CRS versions 3.0.x and 3.1.x are affected, as well as the currently supported versions 3.2.1 and 3.3.2. Integrators and users are advised to upgrade to 3.2.2 and 3.3.3 respectively. |
| A flaw was found in the opj2_decompress program in openjpeg2 2.4.0 in the way it handles an input directory with a large number of files. When it fails to allocate a buffer to store the filenames of the input directory, it calls free() on an uninitialized pointer, leading to a segmentation fault and a denial of service. |
| When PgBouncer is configured to use "cert" authentication, a man-in-the-middle attacker can inject arbitrary SQL queries when a connection is first established, despite the use of TLS certificate verification and encryption. This flaw affects PgBouncer versions prior to 1.16.1. |
| An issue was discovered in freedesktop poppler version 20.12.1, allows remote attackers to cause a denial of service (DoS) via crafted .pdf file to FoFiType1C::cvtGlyph function. |
| Modsecurity owasp-modsecurity-crs 3.2.0 (Paranoia level at PL1) has a SQL injection bypass vulnerability. Attackers can use the comment characters and variable assignments in the SQL syntax to bypass Modsecurity WAF protection and implement SQL injection attacks on Web applications. |
| A remote unauthenticated attacker may use the unauthenticated C++ API to access or modify sensitive data and disrupt services. |
| An attacker may cause chunk-size mismatches that block file transfers and prevent subsequent transfers. |
| A privilege escalation flaw was found in Ceph. Ceph-crash.service allows a local attacker to escalate privileges to root in the form of a crash dump, and dump privileged information. |
| In LuaJIT through 2.0.5, as used in Moonjit before 2.1.2 and other products, debug.getinfo has a type confusion issue that leads to arbitrary memory write or read operations, because certain cases involving valid stack levels and > options are mishandled. NOTE: The LuaJIT project owner states that the debug libary is unsafe by definition and that this is not a vulnerability. When LuaJIT was originally developed, the expectation was that the entire debug library had no security guarantees and thus it made no sense to assign CVEs. However, not all users of later LuaJIT derivatives share this perspective |
| A SQL Injection (CWE-89) vulnerability exists in U.motion Builder software version 1.3.4 which could cause unwanted code execution when an improper set of characters is entered. |
| A vulnerability was found in code-projects Online Complaint Site 1.0. This issue affects some unknown processing of the file /cms/admin/subcategory.php. This manipulation of the argument category causes SQL injection. |
| Authlib is a Python library which builds OAuth and OpenID Connect servers. Prior to version 1.6.4, Authlib’s JWS verification accepts tokens that declare unknown critical header parameters (crit), violating RFC 7515 “must‑understand” semantics. An attacker can craft a signed token with a critical header (for example, bork or cnf) that strict verifiers reject but Authlib accepts. In mixed‑language fleets, this enables split‑brain verification and can lead to policy bypass, replay, or privilege escalation. This issue has been patched in version 1.6.4. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix deadlock when cloning inline extents and using qgroups
There are a few exceptional cases where cloning an inline extent needs to
copy the inline extent data into a page of the destination inode.
When this happens, we end up starting a transaction while having a dirty
page for the destination inode and while having the range locked in the
destination's inode iotree too. Because when reserving metadata space
for a transaction we may need to flush existing delalloc in case there is
not enough free space, we have a mechanism in place to prevent a deadlock,
which was introduced in commit 3d45f221ce627d ("btrfs: fix deadlock when
cloning inline extent and low on free metadata space").
However when using qgroups, a transaction also reserves metadata qgroup
space, which can also result in flushing delalloc in case there is not
enough available space at the moment. When this happens we deadlock, since
flushing delalloc requires locking the file range in the inode's iotree
and the range was already locked at the very beginning of the clone
operation, before attempting to start the transaction.
When this issue happens, stack traces like the following are reported:
[72747.556262] task:kworker/u81:9 state:D stack: 0 pid: 225 ppid: 2 flags:0x00004000
[72747.556268] Workqueue: writeback wb_workfn (flush-btrfs-1142)
[72747.556271] Call Trace:
[72747.556273] __schedule+0x296/0x760
[72747.556277] schedule+0x3c/0xa0
[72747.556279] io_schedule+0x12/0x40
[72747.556284] __lock_page+0x13c/0x280
[72747.556287] ? generic_file_readonly_mmap+0x70/0x70
[72747.556325] extent_write_cache_pages+0x22a/0x440 [btrfs]
[72747.556331] ? __set_page_dirty_nobuffers+0xe7/0x160
[72747.556358] ? set_extent_buffer_dirty+0x5e/0x80 [btrfs]
[72747.556362] ? update_group_capacity+0x25/0x210
[72747.556366] ? cpumask_next_and+0x1a/0x20
[72747.556391] extent_writepages+0x44/0xa0 [btrfs]
[72747.556394] do_writepages+0x41/0xd0
[72747.556398] __writeback_single_inode+0x39/0x2a0
[72747.556403] writeback_sb_inodes+0x1ea/0x440
[72747.556407] __writeback_inodes_wb+0x5f/0xc0
[72747.556410] wb_writeback+0x235/0x2b0
[72747.556414] ? get_nr_inodes+0x35/0x50
[72747.556417] wb_workfn+0x354/0x490
[72747.556420] ? newidle_balance+0x2c5/0x3e0
[72747.556424] process_one_work+0x1aa/0x340
[72747.556426] worker_thread+0x30/0x390
[72747.556429] ? create_worker+0x1a0/0x1a0
[72747.556432] kthread+0x116/0x130
[72747.556435] ? kthread_park+0x80/0x80
[72747.556438] ret_from_fork+0x1f/0x30
[72747.566958] Workqueue: btrfs-flush_delalloc btrfs_work_helper [btrfs]
[72747.566961] Call Trace:
[72747.566964] __schedule+0x296/0x760
[72747.566968] ? finish_wait+0x80/0x80
[72747.566970] schedule+0x3c/0xa0
[72747.566995] wait_extent_bit.constprop.68+0x13b/0x1c0 [btrfs]
[72747.566999] ? finish_wait+0x80/0x80
[72747.567024] lock_extent_bits+0x37/0x90 [btrfs]
[72747.567047] btrfs_invalidatepage+0x299/0x2c0 [btrfs]
[72747.567051] ? find_get_pages_range_tag+0x2cd/0x380
[72747.567076] __extent_writepage+0x203/0x320 [btrfs]
[72747.567102] extent_write_cache_pages+0x2bb/0x440 [btrfs]
[72747.567106] ? update_load_avg+0x7e/0x5f0
[72747.567109] ? enqueue_entity+0xf4/0x6f0
[72747.567134] extent_writepages+0x44/0xa0 [btrfs]
[72747.567137] ? enqueue_task_fair+0x93/0x6f0
[72747.567140] do_writepages+0x41/0xd0
[72747.567144] __filemap_fdatawrite_range+0xc7/0x100
[72747.567167] btrfs_run_delalloc_work+0x17/0x40 [btrfs]
[72747.567195] btrfs_work_helper+0xc2/0x300 [btrfs]
[72747.567200] process_one_work+0x1aa/0x340
[72747.567202] worker_thread+0x30/0x390
[72747.567205] ? create_worker+0x1a0/0x1a0
[72747.567208] kthread+0x116/0x130
[72747.567211] ? kthread_park+0x80/0x80
[72747.567214] ret_from_fork+0x1f/0x30
[72747.569686] task:fsstress state:D stack:
---truncated--- |
| IBM OpenPages 9.1 and 9.0 is vulnerable to HTML injection. A remotely authenticated attacker could inject malicious HTML code, which when viewed, would be executed in the victim's Web browser within the security context of the hosting site. |
| A vulnerability was determined in SourceCodester Point of Sales 1.0. This vulnerability affects unknown code of the file /index.php. This manipulation of the argument Username causes sql injection. It is possible to initiate the attack remotely. The exploit has been publicly disclosed and may be utilized. |
| IPFire versions prior to 2.29 (Core Update 198) contain a SQL injection vulnerability that allows an authenticated attacker to manipulate the SQL query used when viewing OpenVPN connection logs via the CONNECTION_NAME parameter. When viewing a range of OpenVPN connection logs, the application issues an HTTP POST request to the Request-URI /cgi-bin/logs.cgi/ovpnclients.dat and inserts the value of the CONNECTION_NAME parameter directly into the WHERE clause without proper sanitization or parameterization. The unsanitized value can alter the executed query and be used to disclose sensitive information from the database. |
| A security flaw has been discovered in SourceCodester Point of Sales 1.0. Impacted is an unknown function of the file /delete_category.php. Performing manipulation of the argument ID results in sql injection. The attack can be initiated remotely. The exploit has been released to the public and may be exploited. |