| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in bPlugins Flash & HTML5 Video html5-video-player allows Stored XSS.This issue affects Flash & HTML5 Video: from n/a through 2.14.0. |
| Missing Authorization vulnerability in myCred myCred mycred allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects myCred: from n/a through 4.0.2. |
| Missing Authorization vulnerability in miniOrange Page Restriction WordPress (WP) page-and-post-restriction allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Page Restriction WordPress (WP): from n/a through 1.6.1. |
| Missing Authorization vulnerability in weDevs WP ERP erp allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects WP ERP: from n/a through 1.17.10. |
| Missing Authorization vulnerability in weDevs Happy Addons for Elementor happy-elementor-addons allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Happy Addons for Elementor: from n/a through 3.50.1. |
| In the Linux kernel, the following vulnerability has been resolved:
xen-netback: Zero out sring pointers on unmap
If xenvif_map_frontend_data_rings() fails when a ring is already mapped,
it unmaps them via xenvif_unmap_frontend_data_rings() which keeps the
ring pointers unchanged. xenvif_connect_data()'s cleanup path calls
xenvif_disconnect_queue() which in turn calls
xenvif_unmap_frontend_data_rings() again, which will attempt to unmap the
pointers a second time.
Zero out the ring pointers after they are unmapped to avoid this issue.
This is XSA-532 |
| Insertion of Sensitive Information Into Sent Data vulnerability in Barn2 Plugins Document Library Lite document-library-lite allows Retrieve Embedded Sensitive Data.This issue affects Document Library Lite: from n/a through 1.3.0. |
| In the Linux kernel, the following vulnerability has been resolved:
xen-netback: Fix XenBus connection failure cleanup
xenvif_get_stats and xenvif_get_ethtool_stats capture vif->num_queues
under rcu_read_lock. We need to unpublish vif->num_queues before
synchronize_net to ensure that readers that come afterwards will not
read a non-zero vif->num_queues and attempt to access invalid queues.
This is the same cleanup algorithm as used in backend_disconnect and
added in commit b17075d5c198 ("xen-netback: fix race condition on XenBus
disconnect").
This is XSA-531 |
| Unauthenticated Cross Site Scripting (XSS) in GlobalPayments WooCommerce <= 1.23.3 versions. |
| Unauthenticated Cross Site Scripting (XSS) in WP Crowdfunding <= 2.2.2 versions. |
| Shop manager PHP Object Injection in YayMail <= 4.4.6 versions. |
| Unauthenticated PHP Object Injection in RexCoin <= 1.2.6 versions. |
| Unauthenticated PHP Object Injection in Quirky <= 1.23 versions. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix overflow in dacloffset bounds check in build_sec_desc()
When the large dacl_offset is provided, dacl_offset + sizeof(struct
smb_acl) overflows on 32-bit builds and the check is passed,
Which makes le16_to_cpu(ppdacl_ptr->size) read out-of-bounds. This
only happens for dacl_offset in range [0xFFFFFFF8, 0xFFFFFFFF]. So
the oob read is max 8 bytes preceding the allocated ppntsd.
unsigned int dacl_offset = le32_to_cpu(ppntsd->dacloffset);
int ppdacl_size, ntacl_size = ppntsd_size - dacl_offset;
if (!dacl_offset ||
(dacl_offset + sizeof(struct smb_acl) > ppntsd_size))
goto out;
Commit beff0bc9d69b ("ksmbd: fix overflow in dacloffset bounds check")
fixes similar checks in other functions. But leaves this one out,
because it is only valid for 32-bit builds.
Reproduced on 32-bit ARM with KASAN, by a client sending SMB2
SET_INFO(SEC) with dacloffset=0xfffffff8, then QUERY_INFO(SEC) on the
same file:
BUG: KASAN: slab-out-of-bounds in build_sec_desc (fs/smb/server/smbacl.c:1105)
Read of size 2 at addr c2a273fa by task kworker/1:1/35
CPU: 1 UID: 0 PID: 35 Comm: kworker/1:1 Not tainted 7.3.0-rc2+ #5
Workqueue: ksmbd-io handle_ksmbd_work
Call trace:
kasan_check_range from build_sec_desc (fs/smb/server/smbacl.c:1105)
build_sec_desc from smb2_query_info (fs/smb/server/smb2pdu.c:7676)
smb2_query_info from handle_ksmbd_work (fs/smb/server/server.c:160)
handle_ksmbd_work from process_one_work (kernel/workqueue.c:3401)
process_one_work from worker_thread (kernel/workqueue.c:3473)
worker_thread from kthread (kernel/kthread.c:436)
Add overflow check. |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: require the dentry lease record to cover struct ceph_mds_reply_lease
parse_reply_info_lease() reads a 32-bit struct_len off the wire and only
checks that many bytes are present, without requiring struct_len to cover
sizeof(struct ceph_mds_reply_lease) (10 bytes). A malicious MDS can
declare a shorter record and still get the pointer published: the
following *p += sizeof(**lease) overshoot is undone by *p = lend, so
nothing downstream rejects the reply. ceph_fill_trace() ->
update_dentry_lease() then reads 10 bytes through that pointer on any
lookup on a mounted CephFS, running past the end of the message front.
Require the record to cover the structure, matching the sibling
parse_reply_info_dir(). A conforming MDS always encodes the full 10
bytes.
BUG: KASAN: slab-out-of-bounds in __update_dentry_lease.constprop.0 (fs/ceph/inode.c:1459)
Read of size 4 at addr ffff888026c63d65 by task kworker/0:3/2366
Workqueue: ceph-msgr ceph_con_workfn
Call Trace:
__update_dentry_lease.constprop.0 (fs/ceph/inode.c:1459)
ceph_fill_trace (fs/ceph/inode.c:1474 fs/ceph/inode.c:1823)
mds_dispatch (fs/ceph/mds_client.c:4229 fs/ceph/mds_client.c:7225)
ceph_con_process_message (net/ceph/messenger.c:1424)
ceph_con_v1_try_read (net/ceph/messenger_v1.c:1430)
ceph_con_workfn (net/ceph/messenger.c:1576)
process_one_work (kernel/workqueue.c:3396)
worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
ret_from_fork_asm (arch/x86/entry/entry_64.S:245)
The buggy address is located 357 bytes inside of
allocated 360-byte region [ffff888026c63c00, ffff888026c63d68) |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: reject mdsmaps that claim more than CEPH_MAX_MDS ranks
check_new_map() sizes its export-target bitmap from CEPH_MAX_MDS but walks
it with newmap->possible_max_rank, which comes straight off the wire:
ceph_mdsmap_decode() sets it to max(m_num_active_mds, m_max_mds), then
overwrites it with the size of the "in" set. Neither is bounded by
CEPH_MAX_MDS, only by m_info allocating, so a monitor announcing more ranks
than the bitmap holds makes test_bit() read past the end of targets[]. The
clear_bit() loop above indexes the same bitmap, though it is additionally
bounded by mdsc->max_sessions. The map arrives on the monitor connection,
which is unauthenticated in legacy msgr mode.
CEPH_MAX_MDS is a protocol constant from src/mds/mdstypes.h, and the
reserved inode ranges in super.h are laid out one rank apart over that
span, so a map claiming more ranks is corrupt. Reject it where the rank
space is established rather than letting the count reach check_new_map().
BUG: KASAN: stack-out-of-bounds in check_new_map (fs/ceph/mds_client.c:5968)
Read of size 8 at addr ffffc90000ac7798 by task kworker/1:2/127
Workqueue: ceph-msgr ceph_con_workfn
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120)
print_report (mm/kasan/report.c:378 mm/kasan/report.c:482)
kasan_report (mm/kasan/report.c:595)
kasan_check_range (mm/kasan/generic.c:186 mm/kasan/generic.c:200)
check_new_map (fs/ceph/mds_client.c:5968)
ceph_mdsc_handle_mdsmap (fs/ceph/mds_client.c:7060)
extra_mon_dispatch (fs/ceph/super.c:802)
mon_dispatch (net/ceph/mon_client.c:1483)
ceph_con_process_message (net/ceph/messenger.c:1424)
ceph_con_v1_try_read (net/ceph/messenger_v1.c:1430)
ceph_con_workfn (net/ceph/messenger.c:1576)
process_one_work (kernel/workqueue.c:3396)
worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
ret_from_fork_asm (arch/x86/entry/entry_64.S:245)
</TASK>
The buggy address belongs to stack of task kworker/1:2/127
and is located at offset 288 in frame:
check_new_map (fs/ceph/mds_client.c:5846)
This frame has 1 object:
[32, 288) 'targets' |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: udlfb: don't rebuild the mode list while the framebuffer is in use
dlfb_setup_modes() frees info->modelist with fb_destroy_modelist() and
rebuilds it, but fbcon holds raw pointers into that list in
fb_display[i].mode and nothing un-publishes them the way
do_unregister_framebuffer() and store_modes() do with
fbcon_delete_modelist(). The function does refuse to install a new mode
while the framebuffer has users (dlfb->fb_count != 0), but only after the
list is already destroyed. Reached from the 0666 "edid" sysfs attribute,
an unprivileged write to /sys/class/graphics/fb0/edid therefore fails with
-EINVAL and still leaves every fb_display[i].mode dangling; the next
console switch reads the freed fb_videomode in fb_videomode_to_var().
Test fb_count before touching the list. fbcon takes a reference through
fbcon_open(), so that condition covers exactly the states in which
fb_display[] points into the list, and the errno returned to userspace is
unchanged.
BUG: KASAN: slab-use-after-free in fb_videomode_to_var (drivers/video/fbdev/core/modedb.c:905)
Read of size 4 at addr ffff8880107b449c by task kworker/1:1/47
Workqueue: events console_callback
Call Trace:
fb_videomode_to_var (drivers/video/fbdev/core/modedb.c:905)
display_to_var (drivers/video/fbdev/core/fbcon.c:998)
fbcon_switch (drivers/video/fbdev/core/fbcon.c:2182)
redraw_screen (drivers/tty/vt/vt.c:994)
complete_change_console (drivers/tty/vt/vt_ioctl.c:1141)
console_callback (drivers/tty/vt/vt.c:3358)
process_one_work (kernel/workqueue.c:3396)
worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
ret_from_fork_asm (arch/x86/entry/entry_64.S:245)
...
The buggy address is located 28 bytes inside of
freed 96-byte region [ffff8880107b4480, ffff8880107b44e0) |
| In the Linux kernel, the following vulnerability has been resolved:
virtio_net: atomically disable rx mode work
virtio-net uses a boolean to gate rx_mode_work during device teardown.
The flag is changed under RTNL, but ndo_set_rx_mode checks it under the
address-list lock. A callback can therefore pass the check and enqueue work
after teardown has flushed it. The work is also enabled before late
probe operations that can fail, allowing probe unwind to free the netdev
with work still queued.
KASAN reports the worker using a virtqueue that probe unwind already freed:
BUG: KASAN: slab-use-after-free in virtqueue_add_split
Workqueue: events virtnet_rx_mode_work
Call Trace:
virtqueue_add_split (drivers/virtio/virtio_ring.c:706)
virtqueue_add_sgs (drivers/virtio/virtio_ring.c:2839)
virtnet_send_command_reply (drivers/net/virtio_net.c:3565)
virtnet_rx_mode_work (drivers/net/virtio_net.c:3833)
process_one_work (kernel/workqueue.c:3322)
worker_thread (kernel/workqueue.c:3405)
Freed by task 119:
kfree (mm/slub.c:6625)
vp_del_vq.isra.0 (drivers/virtio/virtio_pci_common.c:259)
vp_del_vqs (drivers/virtio/virtio_pci_common.c:285)
virtnet_probe (drivers/net/virtio_net.c:7129)
Use the workqueue disable mechanism to atomically reject new queue attempts
and drain running work. Keep work disabled until probe succeeds or restore
has reattached the netdev, then enable it and replay receive-mode state for
a running interface. Disable it before resource teardown in freeze and
remove. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ipv4: add zero check for snd_cwnd_clamp
When RTAX_CWND is locked, user is able to pass 0 into it.
This could lead to writing 0 to tp->snd_cwnd, leading to a
division by zero error.
Oops: divide error: 0000 [#1] SMP KASAN NOPTI
Call Trace:
<IRQ>
tcp_reno_cong_avoid (net/ipv4/tcp_cong.c:510 (discriminator 1))
tcp_ack (net/ipv4/tcp_input.c:3517 net/ipv4/tcp_input.c:3873 net/ipv4/tcp_input.c:4440)
tcp_rcv_established (net/ipv4/tcp_input.c:6685)
tcp_v4_do_rcv (net/ipv4/tcp_ipv4.c:1854)
tcp_v4_rcv (net/ipv4/tcp_ipv4.c:2248)
ip_protocol_deliver_rcu (net/ipv4/ip_input.c:207 (discriminator 1))
ip_local_deliver_finish (net/ipv4/ip_input.c:241 (discriminator 1))
ip_local_deliver (./include/linux/netfilter.h:325 ./include/linux/netfilter.h:319 net/ipv4/ip_input.c:262)
ip_rcv (./include/net/dst.h:481 (discriminator 6) net/ipv4/ip_input.c:492 (discriminator 6) ./include/linux/netfilter.h:325 (discriminator 6) ./include/li)
__netif_receive_skb_one_core (net/core/dev.c:6297 (discriminator 4))
__netif_receive_skb (net/core/dev.c:6410)
process_backlog (net/core/dev.c:6761)
__napi_poll.constprop.0 (net/core/dev.c:7830)
net_rx_action (net/core/dev.c:7893 net/core/dev.c:8050)
handle_softirqs (kernel/softirq.c:645)
__irq_exit_rcu (kernel/softirq.c:679 kernel/softirq.c:519 kernel/softirq.c:758)
irq_exit_rcu (kernel/softirq.c:775)
sysvec_apic_timer_interrupt (arch/x86/kernel/apic/apic.c:1062 (discriminator 35) arch/x86/kernel/apic/apic.c:1062 (discriminator 35))
RIP: 0010:tcp_cong_avoid_ai (net/ipv4/tcp_cong.c:482)
Fix by checking if user pass in zero as parameter and if lock is present. |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: bound mon_command ack decode to front len
handle_command_ack() bounds the decode with msg->front_alloc_len, the size
of the reply buffer, instead of msg->front.iov_len, the number of bytes the
monitor sent. mon_alloc_msg() routes every CEPH_MSG_MON_COMMAND_ACK to
get_generic_reply(), which returns the preallocated ->reply of whichever
generic request carries the same tid, so the buffer keeps its fixed size
however short the reply is. An ack with hdr.front_len below sizeof(struct
ceph_mon_request_header) + sizeof(u32), including 0, still passes
ceph_decode_need(), and ceph_decode_32() returns four bytes that were never
received: uninitialized slab memory, stale bytes of an earlier message, or
bytes the peer planted by sending a reply that lands in the same buffer and
is then rejected. The read stays within the allocation, so KASAN does not
flag it.
req->result reaches userspace through ceph_monc_do_statfs(),
ceph_monc_get_version() and ceph_monc_blocklist_add(); rbd hands it back
from write() on /sys/bus/rbd/add_single_major, and rbd_get_client() passes
it to ERR_PTR() unchecked, which faults:
rbd: failed to get latest osdmap: -186318427
BUG: unable to handle page fault for address: fffffbfffe9ca034
Oops: Oops: 0000 [#1] SMP KASAN NOPTI
RIP: 0010:do_rbd_add (drivers/block/rbd.c:7105)
Call Trace:
...
kernfs_fop_write_iter (fs/kernfs/file.c:345)
vfs_write (fs/read_write.c:595 fs/read_write.c:687)
ksys_write (fs/read_write.c:739)
do_syscall_64 (arch/x86/entry/syscall_64.c:61 arch/x86/entry/syscall_64.c:84)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
Kernel panic - not syncing: Fatal exception
Use msg->front.iov_len, matching handle_subscribe_ack(),
handle_statfs_reply(), handle_get_version_reply() and handle_auth_reply().
A well-formed ack has front.iov_len >= 22 and is unaffected; a short one
takes the existing bad: path. This applies commit d3c32939fa0e ("libceph:
bound get_version reply decode to front len") to the last decode-side
use of front_alloc_len in this file. |