| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Stack-based buffer overflow in SQL Server allows an authorized attacker to elevate privileges over a network. |
| An issue in kamailio v.6.1.1 and before allows a remote attacker to cause a denial of service via the ims_registrar_pcscf module, specifically the pcscf_save_pending/save_pending path and security-agreement parsing in sec_agree.c:parse_sec_agree() |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Dimitri Grassi Salon booking system salon-booking-system allows Reflected XSS.This issue affects Salon booking system: from n/a through 10.31.5. |
| In the Linux kernel, the following vulnerability has been resolved:
tun: free page on build_skb failure in tun_xdp_one()
When build_skb() fails in tun_xdp_one(), the function sets ret to
-ENOMEM and jumps to the out label, which returns without freeing the
page that vhost_net_build_xdp() allocated for the frame. As with the
short-frame rejection path, tun_sendmsg() discards the per-buffer error
and still returns total_len, so vhost_tx_batch() takes the success path
and never frees the page. Each build_skb() failure in a batch leaks one
page-frag chunk.
Free the page before taking the error path, matching the put_page() the
other error exits of tun_xdp_one() already perform. |
| A flaw was found in bubblewrap. During sandbox setup, creating files or directories under the new root can follow a parent symlink onto the host via /oldroot, writing attacker-chosen paths outside the sandbox as the launching user. This happens before the sandboxed process starts. This issue is GHSA-pxhw-h44j-8pfx. It is fixed in bubblewrap 0.12.0. |
| A code execution flaw was found in Emacs, affecting versions prior to 31.2. The Flymake mode using language backends other than Lisp would execute arbitrary code from the edited file while performing syntax checking. Viewing or editing untrusted files using Emacs could lead to arbitrary code execution with the privileges of the user running Emacs. |
| Pillow is a Python imaging library. From 8.1.0 until 13.0.0, Pillow can allocate an APNG disposal background at the full canvas size before applying the decompression-bomb check. A crafted APNG with a small first frame, a very large declared canvas, and background disposal or first-frame OP_PREVIOUS reaches PngImageFile._seek while Image.open() positions frame zero. The full-canvas allocation occurs inside Image.open() without requiring pixel loading or frame iteration. This can exhaust memory and deny service. This issue is fixed in version 13.0.0. |
| Pillow is a Python imaging library. Prior to 13.0.0, Pillow's ImageMorph.MorphOp.apply() can access memory before a row buffer for a zero-width image. PPM and PGM input can create an image with width zero, and the native morphology routine indexes outrow[width - 1] without rejecting that geometry. An attacker can supply such an image to an application that applies a morphology operation. This can crash the process. This issue is fixed in version 13.0.0. |
| Pillow is a Python imaging library. Prior to 13.0.0, Pillow can double free image memory when ImagingScaleAffine encounters a selective allocation failure. The affected fast path handles Transform.EXTENT or pure scale-and-translate Transform.AFFINE operations with the default NEAREST resampling. The output image allocation must succeed while the additional per-column lookup allocation fails, after which the error path deletes image storage that later cleanup releases again. An attacker who can drive such a large Image.transform() operation under memory pressure may trigger the failure. This can crash the process and may corrupt memory. This issue is fixed in version 13.0.0. |
| Pillow is a Python imaging library. From 8.1.0 until 13.0.0, Pillow's TIFF tile and RGBA decode paths can read beyond row data produced by libtiff. In _decodeTile and the RGBA unpacker path, when Pillow and libtiff interpret duplicated PhotometricInterpretation or BitsPerSample tags differently, Pillow does not verify that the required input row fits inside the row libtiff produced, while the strip path has this validation. Loading pixels from such a crafted TIFF can expose adjacent heap data in output pixels or crash the process. This issue is fixed in version 13.0.0. |
| In the Linux kernel, the following vulnerability has been resolved:
dm thin metadata: fix metadata snapshot consistency on commit failure
__reserve_metadata_snap() and __release_metadata_snap() modify the
superblock's held_root directly in the block_manager's buffer. If the
subsequent metadata commit fails, the held_root gets flushed to disk
through the abort_transaction path, resulting in inconsistent metadata.
Reproducer 1: __reserve_metadata_snap()
1. Create a 2 MiB metadata device and make the region after the 14th
block inaccessible, to trigger metadata commit failure in the
subsequent reserve_metadata_snap operation. The 14th block will be
the shadow destination for the index block.
dmsetup create tmeta --table "0 112 linear /dev/sdc 0
112 3984 error"
2. Create a 16 MiB thin-pool
dmsetup create tdata --table "0 32768 zero"
dd if=/dev/zero of=/dev/mapper/tmeta bs=4k count=1
dmsetup create tpool --table "0 32768 thin-pool /dev/mapper/tmeta \
/dev/mapper/tdata 128 0 1 skip_block_zeroing"
3. Take a metadata snapshot to trigger metadata commit failure and
transaction abort. However, the held_root is written to disk,
breaking metadata consistency.
dmsetup message tpool 0 "reserve_metadata_snap"
thin_check v1.2.2 result:
Bad reference count for metadata block 6. Expected 2, but space map contains 1.
Bad reference count for metadata block 7. Expected 2, but space map contains 1.
Bad reference count for metadata block 13. Expected 1, but space map contains 0.
Reproducer 2: __release_metadata_snap()
1. Create a 2 MiB metadata device and make the region after the 16th
block inaccessible, to trigger metadata commit failure in the
subsequent release_metadata_snap operation. The 16th block will be
the shadow destination for the index block.
dmsetup create tmeta --table "0 128 linear /dev/sdc 0
128 3968 error"
2. Create a 16 MiB thin-pool
dmsetup create tdata --table "0 32768 zero"
dd if=/dev/zero of=/dev/mapper/tmeta bs=4k count=1
dmsetup create tpool --table "0 32768 thin-pool /dev/mapper/tmeta \
/dev/mapper/tdata 128 0 1 skip_block_zeroing"
3. Reserve then release the metadata snapshot, to trigger metadata
commit failure and transaction abort. The held_root gets removed
from the on-disk superblock, causing inconsistent metadata.
dmsetup message tpool 0 "reserve_metadata_snap"
dmsetup message tpool 0 "release_metadata_snap"
thin_check v1.2.2 result:
Bad reference count for metadata block 6. Expected 1, but space map contains 2.
Bad reference count for metadata block 7. Expected 1, but space map contains 2.
1 metadata blocks have leaked.
Fix by deferring the held_root update to commit time.
Additionally, move the existing-snapshot check in __reserve_metadata_snap
before the shadow operation to avoid unnecessary work. In
__release_metadata_snap, clear pmd->held_root before btree deletion so
partial failure leaks blocks rather than leaving a stale reference, and
unlock the snapshot block before decrementing its refcount. |
| In the Linux kernel, the following vulnerability has been resolved:
dm: avoid leaking the caller's thread keyring via the table device file
The refactoring in commit a28d893eb327 ("md: port block device access to file")
accidentally causes the caller's thread keyring to be kept alive long
beyond the caller's lifetime.
As a result, "cryptsetup luksSuspend" silently fails to wipe the
LUKS volume key from memory.
In detail: "cryptsetup luksOpen" uses its supposedly ephemeral thread
keyring to pass the volume key to the kernel. dm-crypt's
crypt_set_keyring_key() copies the key material into its own
crypt_config structure and then drops its own reference to the key in
the keyring with key_put().
With this fix, restoring pre-v6.9 behavior, the copy in the thread
keyring is then promptly garbage collected, such that exactly one copy
of the volume key remains. This single copy is correctly wiped from
memory on "cryptsetup luksSuspend".
Without this fix, the thread keyring and the volume key in it remains.
This second copy is only freed on "luksClose". "luksSuspend" neither
knows about this copy nor has any way to remove it, so the key remains
recoverable from RAM after a suspend that is documented to have wiped it.
This fix should not introduce new security problems, as the code is
anyway gated by CAP_SYS_ADMIN. The device-mapper core, not the calling
task, is the legitimate owner of this long-lived file. |
| In the Linux kernel, the following vulnerability has been resolved:
dm_early_create: fix freeing used table on dm_resume failure
If dm_resume fails, the kernel attempts to free table with
dm_table_destroy, but the table was already instantiated with
dm_swap_table. This commit skips the call to dm_table_destroy in this
case. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-integrity: fix a bug if the bio is out of limits
If dm_integrity_check_limits fails, the code would exit with
DM_MAPIO_KILL. However, the range would be already locked at this point,
and it wouldn't be unlocked, resulting in a deadlock. Let's move the
limit check up, so that when it exits, no resources are leaked. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-integrity: don't increment hash_offset twice
hash_offset is already incremented in the loop "for (i = 0; i < to_copy;
i++, ts--)". Do not increment it again. |
| In the Linux kernel, the following vulnerability has been resolved:
dma-fence: Make dma_fence_dedup_array() robust against 0-count input
dma_fence_dedup_array() returns 1 when called with num_fences == 0:
the for-loop body never executes, j stays at 0, and the final
`return ++j` yields 1. This contradicts both the kernel-doc ("Return:
Number of unique fences remaining in the array") and the natural
expectation that 0 input gives 0 output.
The caller __dma_fence_unwrap_merge() bails out via the
`if (count == 0 || count == 1)` fast path and so is save.
But amdgpu_userq_wait_*() could reach the dedup call with a zero local
count and dereference an uninitialized fence slot in the array.
Make the contract match the documentation by returning 0 early. This
also skips an unnecessary sort() call on an empty array. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/resctrl: Fix use-after-free during unmount
During unmount or failure teardown all mon_data structures that contain
monitoring event file private data are freed after which kernfs nodes are
removed. However, the RDT_DELETED flag is never set for the statically
allocated default resource group.
A concurrent reader of an event file associated with the default resource
group may, after dropping kernfs active protection, block on rdtgroup_mutex
while unmount proceeds to free the file private data and destroy the kernfs
node without waiting for the reader.
When the mutex is released, the reader wakes up, observes that RDT_DELETED
is not set for the default group, and dereferences the already-freed
file private data.
The scenario can be depicted as follows:
CPU0 CPU1
/*
* Default resource group's
* monitoring data accessible via
* kernfs file with kernfs_node::priv
* pointing to a struct mon_data.
* User opens the file for reading.
*/
rdtgroup_mondata_show() /* arch encounters fatal error */
rdtgroup_kn_lock_live() resctrl_exit()
atomic_inc(&rdtgroup_default.waitcount) cpus_read_lock()
kernfs_break_active_protection(kn) mutex_lock(&rdtgroup_mutex)
cpus_read_lock() resctrl_fs_teardown()
mutex_lock(&rdtgroup_mutex) rmdir_all_sub()
mon_put_kn_priv()
/* Delete all mon_data structures */
rdtgroup_destroy_root()
kernfs_destroy_root()
rdtgroup_default.kn = NULL
mutex_unlock(&rdtgroup_mutex)
/*
* rdtgroup_default.flags is empty so
* rdtgroup_kn_lock_live() returns
* &rdtgroup_default
*/
md = of->kn->priv;
/* md points to freed mon_data */
Set RDT_DELETED for the default group unconditionally since the flag does
not lead to the freeing of this statically allocated group.
Do not allow a new resctrl mount if there are any waiters on default group
of previous mount. A new mount will re-initialize the default group that
would appear to waiters from previous mount as though the default group is
accessible causing them to access the mon_data structures from the previous
mount that have been removed. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: macsec: fix use-after-free of metadata_dst on RX SC delete
When an offloaded MACsec RX SC is deleted, macsec_del_rxsc_ctx() freed
the per-SC metadata_dst with metadata_dst_free(), which kfree()s the
object unconditionally and ignores the dst reference count. The RX
datapath in mlx5e_macsec_offload_handle_rx_skb() looks up the SC under
rcu_read_lock() via xa_load(), takes a reference with dst_hold() and
attaches the dst to the skb with skb_dst_set(). A reader that already
obtained the rx_sc pointer can race with the delete path and operate on
freed memory.
Fix the owner side by dropping the reference with dst_release() instead
of freeing unconditionally, and convert the RX datapath to
dst_hold_safe() so a reader racing the SC delete cannot attach a dst
whose last reference was just dropped; only attach it when a reference
was actually taken.
mlx5e_macsec_add_rxsc() also published sc_xarray_element via xa_alloc()
before rx_sc->md_dst was allocated and initialised, so a datapath reader
that looked the SC up by fs_id could observe rx_sc with md_dst still
NULL or, on weakly-ordered architectures, a non-NULL md_dst pointer
whose contents were not yet visible. NULL-check the xa_load() result and
md_dst on the datapath, and reorder add_rxsc() so the xa_alloc() publish
happens only after md_dst is fully initialised; the xarray RCU publish
then pairs with the rcu_read_lock()/xa_load() in the datapath.
Note: macsec_del_rxsc_ctx() also kfree()s rx_sc->sc_xarray_element
without an RCU grace period while the same datapath reads it under
rcu_read_lock(); that is a separate pre-existing issue left to a
follow-up patch.
Found by 0sec automated security-research tooling (https://0sec.ai). |
| In the Linux kernel, the following vulnerability has been resolved:
cpu: hotplug: Preserve per instance callback errors
cpuhp_invoke_callback() unwinds earlier callbacks for the same
hotplug state when one instance fails. The rollback path currently
reuses ret, so a successful rollback can hide the original error and
make the failed transition look successful.
Keep the rollback result separate from the original error. |
| In the Linux kernel, the following vulnerability has been resolved:
net: sit: require CAP_NET_ADMIN in the device netns for changelink
ipip6_changelink() operates on at most two netns, dev_net(dev) and the
tunnel link netns t->net. They differ once the device is created in or
moved to a netns other than the one the request runs in. The rtnl
changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a
caller privileged there but not in t->net can rewrite a tunnel that
lives in t->net.
Gate ipip6_changelink() on rtnl_dev_link_net_capable() at its top,
before any attribute is parsed. sit was the one tunnel type not covered
by the recent series that added this check to the other changelink()
handlers. |
