| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| phpMyFAQ before 4.1.9 contains a missing authorization vulnerability in the deleteUser() API that allows authenticated non-superadmin users with delete_user permission to delete superadmin accounts. Attackers can send a DELETE request to /admin/api/user/delete with a superadmin's userId other than 1, removing administrative access and accountability. |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-af: cn10k: restrict VF LMTLINE sharing to its own PF
rvu_mbox_handler_lmtst_tbl_setup() uses req->base_pcifunc as a direct
index into the LMT map table to read another function's LMTLINE
physical base address and copy it into the caller's own LMT map table
entry. The mailbox dispatcher authenticates req->hdr.pcifunc from the
IRQ source, but req->base_pcifunc is a separate payload field and is
not sanitized.
Reject the request with -EPERM when a VF caller's base_pcifunc is not a
valid function under its own PF. is_pf_func_valid() bounds the FUNC field
to the PF's configured VF count, keeping the computed index inside the
caller's own slot block. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_ct: preserve tc_skb_cb across defragmentation
tcf_ct_handle_fragments() calls nf_ct_handle_fragments() without saving
and restoring skb->cb. The defrag helper clears IPCB/IP6CB, which aliases
the tc_skb_cb/qdisc_skb_cb control buffer. Fragmented traffic through
act_ct therefore loses qdisc metadata such as pkt_segs and can trigger
WARN_ON_ONCE() in qdisc_pkt_segs() when panic_on_warn is enabled.
Save and restore the full tc_skb_cb around nf_ct_handle_fragments(),
matching the pattern used by ovs_ct_handle_fragments(). |
| In the Linux kernel, the following vulnerability has been resolved:
drop_monitor: fix size calculations for 64-bit attributes
net_dm_packet_report_fill() and net_dm_hw_packet_report_fill() use
nla_put_u64_64bit() to append 64-bit attributes (NET_DM_ATTR_PC and
NET_DM_ATTR_TIMESTAMP).
On 32-bit architectures without CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS,
nla_put_u64_64bit() may append a 4-byte NET_DM_ATTR_PAD attribute for
64-bit alignment.
However, net_dm_packet_report_size() and net_dm_hw_packet_report_size()
used nla_total_size(sizeof(u64)) instead of nla_total_size_64bit(sizeof(u64)),
budgeting 12 bytes instead of up to 16 bytes.
This under-estimation of SKB size can lead to an skb_over_panic() when
__nla_reserve() or skb_put() is subsequently called.
Fix this by using nla_total_size_64bit(sizeof(u64)) in both size calculations. |
| The WP Verify API WordPress plugin through 1.0.0 does not properly sanitize and escape a parameter before using it in a SQL query, allowing unauthenticated users to perform SQL injection attacks. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Clear __hyp_running_vcpu when flushing the pKVM hyp vCPU
flush_hyp_vcpu() copies the host vCPU context into the hyp's private
vCPU on every run. ctxt_to_vcpu() expects a guest context to have a
NULL __hyp_running_vcpu, which is only ever set on the host context, so
that it resolves the vCPU via container_of(). While this is generally
the case, flush_hyp_vcpu() copies the context verbatim and does not
enforce this, so a value provided by the host is dereferenced at EL2
(host -> EL2).
Fix by clearing __hyp_running_vcpu after the copy. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: harden POSIX SID length parsing
posix_info_sid_size() reads sid[1] to obtain the subauthority count,
but its existing boundary check still accepts buffers with only one
remaining byte. Require two bytes before reading sid[1] so all client
paths that reuse the helper reject truncated POSIX SIDs safely. |
| In the Linux kernel, the following vulnerability has been resolved:
ip6: vti: Use ip6_tnl.net in vti6_changelink().
ip netns add ns1
ip netns add ns2
ip -n ns1 link add vti6_test type vti6 remote ::1 local ::2 key 7
ip -n ns1 link set vti6_test netns ns2
ip -n ns2 link set vti6_test type vti6 remote ::3 local ::4 key 9
ip netns del ns2
ip netns del ns1
[ 132.495484] ------------[ cut here ]------------
[ 132.497609] kernel BUG at net/core/dev.c:12376!
Commit 61220ab34948 ("vti6: Enable namespace changing") dropped
NETIF_F_NETNS_LOCAL from vti6 devices. A vti6 tunnel can then
move through IFLA_NET_NS_FD. After the move dev_net(dev) points
at the new netns while t->net stays at the creation netns.
vti6_changelink() and vti6_update() still use dev_net(dev) and
dev_net(t->dev). They unlink from one per netns hash and relink
into another. The creation netns is left with a stale entry.
cleanup_net() of that netns later walks freed memory.
Reachable from an unprivileged user namespace (unshare --user
--map-root-user --net). Cross tenant scope on container hosts. |
| In the Linux kernel, the following vulnerability has been resolved:
ieee802154: 6lowpan: only accept IPv6 packets in lowpan_xmit()
The aoe driver (or similar) generates a non-IPv6 packet
(e.g., ETH_P_AOE) and queues it for transmission via dev_queue_xmit()
on a 6LoWPAN interface (configured by the user or test case).
Since the packet is not IPv6, the 6LoWPAN header_ops->create function
(lowpan_header_create or header_create) returns early without initializing
the lowpan_addr_info structure in the skb headroom.
In the transmit function (lowpan_xmit), the driver calls lowpan_header
(or setup_header) which unconditionally copies and uses the lowpan_addr_info
from the headroom, which contains uninitialized data.
Fix this by dropping non IPv6 packets.
A similar fix is needed in net/bluetooth/6lowpan.c bt_xmit(). |
| In the Linux kernel, the following vulnerability has been resolved:
x86/ftrace: Relocate %rip-relative percpu refs in dynamic trampolines
With CONFIG_CALL_DEPTH_TRACKING enabled on an x86 retbleed-affected platform
(eg: Skylake), with retbleed=stuff, registering a dynamic ftrace trampoline
crashes on the first call into the traced function:
BUG: unable to handle page fault for address: ffff88817ae18880
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 4b53067 P4D 4b53067 PUD 0
Oops: Oops: 0002 [#1] SMP PTI
CPU: 3 UID: 0 PID: 187 Comm: usleep Not tainted 7.0.10 #243 PREEMPT(full)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.17.0-2-2 04/01/2014
Code: 24 78 00 00 00 00 48 89 ea 48 89 54 24 20 48 8b b4 24 b8 00 00 00 48 8b bc 24 b0 00 00 00 48 89 bc 24 80 00 00 00 48 83 ef 05 <65> 48 c1 3d 1f a8 b6 02 05 48 8b 15 f6 00 00 00 4c 89 3c 24 4c 89
Call Trace:
<TASK>
? find_held_lock
? exc_page_fault
? lock_release
? __x64_sys_clock_nanosleep
? lockdep_hardirqs_on_prepare
? trace_hardirqs_on
__x64_sys_clock_nanosleep
do_syscall_64
? exc_page_fault
? call_depth_return_thunk
entry_SYSCALL_64_after_hwframe
...
Kernel panic - not syncing: Fatal exception
This small reproducer allows to easily trigger the crash:
# echo 'p __x64_sys_clock_nanosleep' > /sys/kernel/tracing/kprobe_events
# echo 1 > /sys/kernel/tracing/events/kprobes/p___x64_sys_clock_nanosleep_0/enable
# usleep 1
Monitoring the crash under GDB points to the exact instruction in charge of
incrementing the call depth:
sarq $5, %gs:__x86_call_depth(%rip)
This instruction matches the one inserted by the ftrace_regs_caller from
ftrace_64.S. This emitted code was likely working fine until the introduction
of
59bec00ace28 ("x86/percpu: Introduce %rip-relative addressing to PER_CPU_VAR()"):
it has made the call depth accounting addressing relative to $rip, instead of
being based on an absolute address.
As this code exact location depends on where the trampoline lives in memory,
the corresponding displacement needs to be adjusted at runtime to actually
correctly find the per-cpu __x86_call_depth value, otherwise the targeted
address is wrong, leading to the page fault seen above.
Fix the %rip-relative displacement of the copied CALL_DEPTH_ACCOUNT
instruction (from ftrace_regs_caller) by calling text_poke_apply_relocation(),
as it is done for example by the x86 BPF JIT compiler through
x86_call_depth_emit_accounting(). This corrects both CALL_DEPTH_ACCOUNT slots,
in ftrace_caller and ftrace_regs_caller.
[ bp: Massage. ] |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: pcrypt - restore callback for non-parallel fallback
pcrypt installs pcrypt_aead_done() on the child AEAD request before
trying to submit it through padata. If padata_do_parallel() returns
-EBUSY, pcrypt falls back to calling the child AEAD directly.
That fallback must not keep the padata completion callback. Otherwise
an asynchronous completion runs pcrypt_aead_done() even though the
request was never enrolled in padata.
Restore the original request callback and callback data before calling
the child AEAD directly. This keeps the fallback path aligned with a
direct AEAD request while leaving the parallel path unchanged. |
| In the Linux kernel, the following vulnerability has been resolved:
misc: nsm: pin the module while the device is open
misc_open() installs a misc driver's file operations with fops_get(),
which pins file_operations::owner before replacing the file's f_op. The
NSM misc device leaves nsm_dev_fops.owner unset, so opening /dev/nsm does
not take a module reference on the nsm driver.
If the driver is built as a module, an open file descriptor can therefore
survive rmmod of the module that provides its ioctl callbacks. A later
ioctl through that descriptor can call into unloaded module text.
Set nsm_dev_fops.owner to THIS_MODULE so the misc core holds the module
while any /dev/nsm file descriptor is open, matching the lifetime
expectation for the installed file operations. |
| Gitea resolved the principals of an SSH certificate by searching the content of all stored public keys instead of only principal keys. When Gitea trusts a user certificate authority (`SSH_TRUSTED_USER_CA_KEYS`) and accepts arbitrary principals (`SSH_AUTHORIZED_PRINCIPALS_ALLOW=anything`), a user could register another user's public key line as their own principal, or a holder of a certificate signed by that authority could list it, and then authenticate as the owner of that key through the HTTP signature API and the built-in SSH server. Instances that do not trust a user certificate authority are not affected. |
| A race condition vulnerability in the SessionManager of CNCF: Cloud Native Computing Foundation Argo CD v3.0.6 allows attackers to bypass rate limiting and perform a brute force attack via repeated crafted requests. |
| Double free in Windows Internet Information Services allows an unauthorized attacker to deny service over a network. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: set new_stream to NULL after release
In dm_update_crtc_state(), the skip_modeset path releases new_stream
via dc_stream_release() but does not set the pointer to NULL.
If a later error (e.g., color management failure) triggers the fail
label, the error path calls dc_stream_release() again on the same
dangling pointer, causing a double release and potential use-after-free.
Fix this by setting new_stream to NULL after the initial release.
(cherry picked from commit 99f3af19073b3ddbfd96e789124cce12c4277b28) |
| In the Linux kernel, the following vulnerability has been resolved:
smb/client: Fix error code in smb2_aead_req_alloc()
The "*num_sgs" variable is a u32 so "ERR_PTR(*num_sgs)" doesn't work.
We would have to do something similar to the previous line where it's
cast to int and then long. However, it's simpler to store the return in
an int ret variable.
This bug would eventually result in a crash when dereference the invalid
error pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: amlogic - avoid double cleanup in meson_crypto_probe()
When meson_allocate_chanlist() fails after a partial allocation, it already
unwinds the allocated chanlist state through its local error path.
meson_crypto_probe() then jump to error_flow and calls
meson_free_chanlist() again, causing the same per-flow resources to be torn
down twice. In the reproduced failure path, the second teardown
re-entered crypto_engine_exit() on an already destroyed worker and KASAN
reported a slab-use-after-free in kthread_destroy_worker().
Prevent double-free by handling partial allocation failures locally within
meson_allocate_chanlist() and skipping the outer cleanup path.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available.
The bug was reproduced in a QEMU x86_64 guest booted with KASAN on v7.1,
using the reproducer under tools/testing/meson_crypto_probe. The reproducer
forces the second dma_alloc_attrs() call in the gxl-crypto probe path to
return NULL, making meson_allocate_chanlist() fail after partial
initialization. On the unpatched kernel this reliably triggered a
slab-use-after-free. With this fix applied, the same reproducer no longer
emits any KASAN report and the probe fails cleanly with -ENOMEM.
==================================================================
BUG: KASAN: slab-use-after-free in kthread_destroy_worker+0xb2/0xd0
Read of size 8 at addr ff1100010c057a68 by task insmod/265
CPU: 1 UID: 0 PID: 265 Comm: insmod Tainted: G O 7.1.0-rc2-00376-g810af9adc907-dirty #10 PREEMPT(lazy)
Tainted: [O]=OOT_MODULE
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x68/0xa0
print_report+0xcb/0x5e0
? __virt_addr_valid+0x21d/0x3f0
? kthread_destroy_worker+0xb2/0xd0
? kthread_destroy_worker+0xb2/0xd0
kasan_report+0xca/0x100
? kthread_destroy_worker+0xb2/0xd0
kthread_destroy_worker+0xb2/0xd0
meson_crypto_probe+0x4d0/0xc10 [amlogic_gxl_crypto]
platform_probe+0x99/0x140
really_probe+0x1c6/0x6a0
? __pfx___device_attach_driver+0x10/0x10
__driver_probe_device+0x248/0x310
? acpi_driver_match_device+0xb0/0x100
driver_probe_device+0x48/0x210
? __pfx___device_attach_driver+0x10/0x10
__device_attach_driver+0x160/0x320
bus_for_each_drv+0x104/0x190
? __pfx_bus_for_each_drv+0x10/0x10
? _raw_spin_unlock_irqrestore+0x2c/0x50
__device_attach+0x19d/0x3b0
? __pfx___device_attach+0x10/0x10
? do_raw_spin_unlock+0x53/0x220
device_initial_probe+0x78/0xa0
bus_probe_device+0x5b/0x130
device_add+0xcfd/0x1430
? __pfx_device_add+0x10/0x10
? insert_resource+0x34/0x50
? lock_release+0xc9/0x290
platform_device_add+0x24e/0x590
? __pfx_meson_crypto_probe_repro_init+0x10/0x10 [meson_crypto_probe_repro]
meson_crypto_probe_repro_init+0x330/0xff0 [meson_crypto_probe_repro]
do_one_initcall+0xc0/0x450
? __pfx_do_one_initcall+0x10/0x10
? _raw_spin_unlock_irqrestore+0x2c/0x50
? __create_object+0x59/0x80
? kasan_unpoison+0x27/0x60
do_init_module+0x27b/0x7d0
? __pfx_do_init_module+0x10/0x10
? kasan_quarantine_put+0x84/0x1d0
? kfree+0x32c/0x510
? load_module+0x561e/0x5ff0
load_module+0x54fe/0x5ff0
? __pfx_load_module+0x10/0x10
? security_file_permission+0x20/0x40
? kernel_read_file+0x23d/0x6e0
? mmap_region+0x235/0x4a0
? __pfx_kernel_read_file+0x10/0x10
? __file_has_perm+0x2c0/0x3e0
init_module_from_file+0x158/0x180
? __pfx_init_module_from_file+0x10/0x10
? __lock_acquire+0x45a/0x1ba0
? idempotent_init_module+0x315/0x610
? lock_release+0xc9/0x290
? lock
---truncated--- |
| The 10Web Booster – Website speed optimization, Cache & Page Speed optimizer plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'author' parameter in all versions up to, and including, 2.34.8 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. This is exploitable because a comment author Name value containing ' src=' and an event-handler payload contains no HTML tags or quote characters, allowing it to survive WordPress core's sanitize_text_field and land verbatim inside the alt attribute, where the plugin's own str_replace subsequently injects the single quote that breaks out of the attribute context. |
| In the Linux kernel, the following vulnerability has been resolved:
net: gue: reject invalid REMCSUM offsets
The REMCSUM option carries an absolute checksum start and checksum field
offset. gue_remcsum() passes them to skb_remcsum_process(), whose
partial path stores offset - start in the u16 skb->csum_offset variable.
If offset is less than start, this underflows.
A forwarded packet can retain CHECKSUM_PARTIAL and reach a NETIF_F_HW_CSUM
driver which trusts the metadata, leading skb_copy_and_csum_dev() to write
two bytes about 64 KiB beyond the destination buffer.
Reject reversed tuples in validate_gue_flags(), after the existing length
validation, so all GUE parsers enforce the ordering in one place. |
