| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
iio: imu: adis16480: fix unprotected debugfs reads
The firmware_revision and firmware_date file operations are open coded
and never call debugfs_file_get(), which debugfs_create_file_unsafe()
requires. debugfs_remove_recursive() therefore does not wait for a read
in progress, and unbind frees the iio_dev underneath it.
Use debugfs_create_file() instead. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: gyro: adis16136: fix unprotected debugfs reads
The serial_number file operations are open coded and never call
debugfs_file_get(), which debugfs_create_file_unsafe() requires.
debugfs_remove_recursive() therefore does not wait for a read in
progress, and unbind frees the iio_dev underneath it.
Use debugfs_create_file() instead. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: frequency: adf4377: Fully initialize clk_init_data and clk_parent_data
The clk_init_data structure contains several mutually-exclusive members
for different methods to specify the possible parents of a clock,
prompting drivers to initialize only the members they need. However,
not initializing all members may cause subtle issues, which are only
exposed when CONFIG_INIT_STACK_ALL_PATTERN or CONFIG_INIT_STACK_NONE is
enabled.
adf4377_clk_register() fills in init.parent_data, and assumes that
init.parent_names is NULL. However, the latter is uninitialized, and
thus may cause a crash.
Similarly, adf4377_clk_register() fills in only parent_data.fw_name,
leaving other members of the clk_parent_data structure uninitialized.
Make sure all members are fully initialized, to fix such bugs, and to
avoid future breakage when converting drivers to a different method for
specifying the parents. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: xilinx-xadc: free IRQ before cancelling the unmask worker on unbind
The ZYNQ XADC alarm IRQ handler queues zynq_unmask_work via
schedule_delayed_work(); that work is cleared by a devm callback.
Register the devm callback before devm_request_irq() so the devres LIFO
teardown frees the IRQ first, ensuring the handler can no longer queue
work by the time the workqueue is cleared. Otherwise the handler could
re-arm the work and run it after the xadc structure has been freed.
This issue was found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: adi-axi-adc: Initialize state mutex
The AXI ADC register access paths serialize transactions with st->lock,
but probe does not initialize it. Initialize the mutex before registering
the backend. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: ad_sigma_delta: fix use-after-free on unbind
ad_sd_buffer_postenable() allocates sigma_delta->samples_buf with
devm_krealloc() at runtime, so its devres entry sits after all
probe-time entries of the driver. devm resources are released in
reverse allocation order, which means unbind frees samples_buf before
iio_device_unregister() disables the buffers and detaches the trigger
pollfunc. The data ready IRQ is still enabled at that point, so
ad_sd_trigger_handler() can still run and memcpy() incoming samples
into the freed samples_buf.
Fix this by preallocating the buffer in
devm_ad_sd_setup_buffer_and_trigger(), before the triggered buffer and
the IRQ are set up, so it is freed only after iio_device_unregister()
has drained the trigger handler via free_irq(). Size it for the worst
case of all sequencer slots being active; ad_sd_validate_scan_mask()
already caps the number of active channels at num_slots.
This issue was found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: accel: kionix-kx022a: Prevent memory leak and fix state
The driver allocates memory for samples at buffer enable path. If regmap
operation fails in the kx022a_fifo_enable() at the buffer enable path, the
allocated memory is never freed. Furthermore, the state information and
previous hardware configuration(s) aren't undone, potentially leaving
WMI interrupts and buffers enabled, or driver state flags wrong.
Free the memory and revert the hardware configuration and state flags on
error path. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: split cifsFileInfo bitfields to avoid shared-byte RMW races
The invalidHandle, swapfile, oplock_break_cancelled, offload,
and status_file_deleted fields are stored in the same bitfield byte
in struct cifsFileInfo, but are updated in different code paths that
may run simultaneously, and are protected by different locks. Since
bitfield assignments generate byte-level read-modify-write operations,
a modification to one flag can overwrite a concurrent modification to
another flag.
To avoid these races, convert these flags from a bitfield to
separate bool fields. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: drain and invalidate before server-side copy/clone
cifs_file_copychunk_range() and the clone (FICLONE) path of
cifs_remap_file_range() do not serialise the destination page cache
against the server-side copy the way the other server-side range
operations (smb3_zero_range(), smb3_punch_hole(), smb3_collapse_range()
and smb3_insert_range()) do.
cifs_file_copychunk_range() invalidates the destination range with
filemap_invalidate_inode(), which takes and drops the mapping's
invalidate_lock internally, so the lock is no longer held when the
copychunk ioctl is issued. It also never drains in-flight netfs I/O on
the target. The clone path never takes the invalidate_lock at all (only
i_rwsem), uses a bare truncate_inode_pages_range() and likewise does not
drain outstanding I/O.
As a result an asynchronous destination writeback can complete after the
server-side copy/clone has run and reinstate stale data over the region
just written by the server, corrupting the file. This is the same class
of corruption as commit d7d2adcd022b ("smb/client: flush dirty data
before punching a hole") and has been seen randomly in generic/363
against Windows Server.
Fix both paths to follow the established ordering: hold the target
mapping's invalidate_lock across the flush and invalidation of the
destination and the server ioctl, and call netfs_wait_for_outstanding_io()
on the target to drain in-flight writes before the ioctl is issued. Only
the target inode's invalidate_lock is required, as the source is merely
flushed and not invalidated; i_rwsem (already held via
lock_two_nondirectories()) is acquired before the invalidate_lock,
matching the VFS lock ordering. Since filemap_invalidate_inode() takes
that same lock internally, replace it with its own unmap/flush/invalidate
steps instead of calling it, and return early on a zero-length copy to
avoid a range underflow. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: flush dirty data before zeroing a range
smb3_zero_range() emulates FALLOC_FL_ZERO_RANGE by invalidating the
page cache over the target range with truncate_pagecache_range() and
then issuing FSCTL_SET_ZERO_DATA to the server.
Dirty data was only flushed conditionally, when the range reached or
extended EOF. For a purely interior zero range that does not reach
EOF, no flush happened, so a dirty folio overlapping the range could
be written back to the server after the FSCTL and refill the range
that was just zeroed with stale data.
Fix this by unconditionally flushing and waiting for dirty data in the
range before invalidating the page cache and issuing
FSCTL_SET_ZERO_DATA, exactly as was done for smb3_punch_hole() in
commit d7d2adcd022b ("smb/client: flush dirty data before punching a
hole"); the two paths are structurally identical here.
This is observed as generic/363 randomly reading stale data where a
zeroed range is expected against Windows Server. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: flush and commit data before querying allocated ranges
The mode 0 / FALLOC_FL_KEEP_SIZE fallocate emulation for small interior
ranges in smb3_simple_fallocate_range() issues
FSCTL_QUERY_ALLOCATED_RANGES and zero-fills any sub-range the server
reports as an unallocated hole, to force block allocation without
changing file contents.
This is unsafe against Windows servers. Per the Win32 documentation,
FSCTL_QUERY_ALLOCATED_RANGES only reports ranges that *may* contain
nonzero data and is explicitly not coherent with recently written data:
"a call to FSCTL_QUERY_ALLOCATED_RANGES [after writing to a network
file] would not necessarily return a correct list of allocated
regions. To ensure coherency [...] flush the data to the file"
fsx (generic/363) reproduces the resulting corruption against Windows
Server 2022: a range is written, an uncached read returns the data, yet
the next FSCTL_QUERY_ALLOCATED_RANGES on that range reports it as a whole
hole, so the emulation overwrites live data with zeroes. A network trace
confirmed the WRITE, the READ returning data and the query returning an
empty range list within microseconds. Samba does not exhibit this; its
query is coherent with the written data.
Write back the dirty pages, drain any outstanding I/O and issue an SMB2
FLUSH to force the server to commit the data before querying the
allocated ranges, so the query reflects the data actually present.
With this, generic/363 passes against both Windows Server 2022 and Samba
over 100000 fsx operations. |
| Adding attachments to a release checked the repository and release of an attachment but not whether it was already linked to an issue or comment. A user with write access to the releases of a repository, who knew the UUID of an attachment in that repository, could link it to a release. This exposed the file name, size and download count of the attachment through the release and allowed the user to rename or delete it. |
| The visibility check of Gitea user profiles was applied to GET requests only, while `POST /{username}` (follow and unfollow) required only a signed-in user. Any authenticated user could therefore obtain the full name, location, website and description of a user with a private profile from the response. The issue was fixed in 28.1.0 and disclosed with 28.2.0. |
| Creating a draft release through the API returned an `assets` list that was built from a release without an ID, which matched every attachment that was not linked to a release. A user who could create a draft release in a repository therefore received the metadata (file name, UUID, upload time, size and download count) of issue and comment attachments of repositories they could not read, and of abandoned uploads. |
| `GET /api/v1/user/subscriptions` returned the metadata of every repository a user was watching without checking that the user still had access to it. A user who watched a private repository while having access, and later lost it, for example through a team permission downgrade, could still read its name, description, clone URLs, owner and counters. The issue was fixed in 1.27.0 and 28.0.0 and disclosed with 28.2.0. |
| The Gitea Actions artifact v4 (Twirp) handlers read the whole request body into memory without a size limit. A user who can run a workflow and obtains the runner token of that run could send an oversized request to the artifact service and exhaust the memory of the server, which terminates the Gitea process. The request body is now limited to 1 MiB. |
| Requesting `/{username}/-/repositories` for an individual user instead of an organization made the organization home handler dereference a nil organization and panic. The request needs no authentication and no special configuration. The server answered with an HTTP 500 error and logged a panic for each request; the fix returns 404 for individual users. |
| The Gitea OpenID association callback in the security settings accepted a positive OpenID 2.0 assertion without checking that the signed-in user had started the linking. Because OpenID 2.0 allows unsolicited assertions, an attacker-controlled OpenID provider could attach the attacker's identity to the account of a signed-in victim who opened a crafted link, and the attacker could then sign in as the victim through OpenID login, which does not apply the local TOTP or WebAuthn checks. The callback now requires a time-limited `state` value bound to the user. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: fix potential stack infoleak in em_text_dump()
em_text_dump() allocates struct tcf_em_text on the stack without zeroing
it. strscpy() writes the algorithm name and a NUL terminator into
conf.algo[], leaving the remaining bytes uninitialised. nla_put_nohdr()
then copies the full struct to the netlink response.
KMSAN on Linux 7.2-rc6 reports two kernel-infoleak splats from this path,
one triggered via "tc filter show" and one via a raw RTM_GETTFILTER dump:
BUG: KMSAN: kernel-infoleak in _copy_to_iter+0x1c9/0x2620
nla_put_nohdr+0x83/0x130
em_text_dump+0x291/0x550
Local variable conf created at: em_text_dump+0x5d/0x550
Bytes 168-179 of 199 are uninitialized
I am not certain whether this constitutes a real security problem in
practice: the test was conducted in a controlled KMSAN environment and
the leaked stack bytes may or may not carry sensitive data on actual
production kernels. I am reporting it because KMSAN flagged it as a
kernel-infoleak and the fix is straightforward. I can provide a
userspace reproducer on request.
The original code used strncpy() which zero-pads to the destination size.
Commit b04202d6065c ("net/sched: replace strncpy with strscpy") replaced
it with strscpy(), which does not pad, creating this condition.
Zero-initialising the struct closes it. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: hold asoc or transport before mod_timer() in timer handlers
Take the association or transport reference before rearming a timer in the
timer handlers.
The existing code calls mod_timer() before taking the reference needed by
the rearmed timer without holding the sock lock. This creates a race with
timer cleanup: if the timer is deleted after mod_timer() returns but before
the reference is taken, the cleanup path can drop the timer's reference and
destroy the transport or association. The timer handler then takes a
reference on the already freed object and eventually drops it, causing a
refcount underflow.
Hold the object before mod_timer() and drop the reference if mod_timer()
reports that the timer was already pending in timer handlers. Apply the
same ordering to the proto-unreachable path, which can rearm a transport
timer outside the timer handlers without holding the sock lock. |
