Export limit exceeded: 413267 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (17512 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-74483 | 1 Linux | 1 Linux Kernel | 2026-08-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: binfmt_misc: don't leak the user namespace when the mount fails bm_get_tree() takes a reference to the user namespace and hands it to get_tree_keyed() as the sget key. sget_fc() moves that reference into sb->s_fs_info and clears fc->s_fs_info, so from that point on the superblock owns it and bm_free() doesn't see it anymore. The superblock drops it in ->put_super(). But generic_shutdown_super() only calls ->put_super() from inside the if (sb->s_root) branch, so nothing releases it when bm_fill_super() fails: - The kzalloc_obj() failure leaves s_root NULL and the whole branch is skipped. - A simple_fill_super() failure in the file loop leaves s_root set, but s_op still points at simple_super_operations, which has no ->put_super(). bm_fill_super() installs s_ops only once simple_fill_super() returned success, and installing it earlier wouldn't help either because simple_fill_super() overwrites s_op. Either way vfs_get_super() calls deactivate_locked_super() and the reference is gone for good. binfmt_misc mounts are available in a user namespace and both the inode and the dentry cache are SLAB_ACCOUNT, so an unprivileged caller under a tight memory cgroup can fail simple_fill_super() on demand and leak one user namespace per attempt. Drop the reference in ->kill_sb() instead, which runs unconditionally, the same way nfsd and rpc_pipefs release their keyed s_fs_info. That also stops ->put_super() from clearing s_fs_info while the superblock is still on @fs_supers. generic_shutdown_super() leaves it there on purpose so that sget_fc() keeps finding it until kill_sb() has run, but a NULL s_fs_info makes test_keyed_super() miss it, so a concurrent mount for the same user namespace skips the grab_super() wait and creates a second superblock for a namespace that is still being torn down. | ||||
| CVE-2026-72308 | 1 Linux | 1 Linux Kernel | 2026-08-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mlxsw: fix refcount leak in mlxsw_sp_port_lag_join() When mlxsw_sp_port_lag_index_get() fails, mlxsw_sp_port_lag_join() returns an error without releasing the lag reference obtained by the earlier mlxsw_sp_lag_get(). All other error paths in the function jump to the cleanup label that ends with mlxsw_sp_lag_put(), so this is a single missed release. Fix the leak by replacing the bare 'return err' with a goto to the existing error cleanup label, which will drop the reference safely. | ||||
| CVE-2026-72305 | 1 Linux | 1 Linux Kernel | 2026-08-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: VDUSE: avoid leaking information to userspace The bounceing is not necessarily page aligned, so current VDUSE can leak kernel information through mapping bounce pages to userspace. Allocate bounce pages with __GFP_ZERO to avoid leaking information to userspace. | ||||
| CVE-2026-72260 | 1 Linux | 1 Linux Kernel | 2026-08-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: mediatek: mt8192: Check runtime resume during probe The MT8192 AFE probe enables runtime PM temporarily while reinitializing the regmap cache from hardware, but it uses pm_runtime_get_sync() without checking the return value. If runtime resume fails, probe keeps going without the device necessarily being accessible, and pm_runtime_get_sync() may leave the PM usage count incremented. The regmap_reinit_cache() failure path also returns before dropping the temporary PM reference and before clearing pm_runtime_bypass_reg_ctl. Use pm_runtime_resume_and_get() so resume failures do not leak a usage count, and clear the temporary bypass flag after dropping the probe PM reference on all regmap_reinit_cache() outcomes. | ||||
| CVE-2026-72040 | 1 Linux | 1 Linux Kernel | 2026-08-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ipmi: fix refcount leak in i_ipmi_request() When a caller provides a `supplied_recv` message to i_ipmi_request(), the function increments the user's `nr_msgs` reference count. If an error occurs later, the out_err cleanup path only frees the recv_msg if the function allocated it itself (i.e., !supplied_recv). In the supplied_recv case the cleanup is skipped, leaving the reference count elevated. The caller ipmi_request_supply_msgs() does not release the supplied_recv on error, so the reference is permanently leaked. Fix this by explicitly reverting the reference count operations when a supplied recv_msg with a valid user pointer is present in the error path: decrement nr_msgs and drop the user's kref. | ||||
| CVE-2026-68371 | 1 Linux | 1 Linux Kernel | 2026-08-23 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: musb: omap2430: Do not put borrowed of_node in probe omap2430_probe() stores pdev->dev.of_node in a local np variable. This is a borrowed pointer and the probe function does not take a reference to it. The success and error paths nevertheless call of_node_put(np). This drops a reference that is owned by the platform device, and can leave pdev->dev.of_node with an unbalanced reference count. Do not put the borrowed platform device node from omap2430_probe(). References taken for the child MUSB device are handled by the device core, and the ctrl-module phandle reference is still released separately. | ||||
| CVE-2026-68205 | 1 Linux | 1 Linux Kernel | 2026-08-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: v4l2-fwnode: Fix subdev owner overwritten in v4l2_async_register_subdev_sensor() The v4l2 helper v4l2_async_register_subdev_sensor() calls v4l2_async_register_subdev(), which is a macro that expands to __v4l2_async_register_subdev(sd,THIS_MODULE). Since the macro is expanded inside v4l2-fwnode.c, THIS_MODULE resolves to the v4l2-fwnode module rather than the sensor driver module that originally set sd->owner. When v4l2-fwnode is built-in, THIS_MODULE evaluates to NULL, which then overwrites the sensor driver's owner with NULL. This causes the problem that the sensor module's reference count is never incremented during async registration, so the module can be removed while the subdevice is still in use by a notifier (e.g., a CSI-2 receiver bridge driver). Fix this by renaming v4l2_async_register_subdev_sensor() to __v4l2_async_register_subdev_sensor() with an added explicit module argument and introducing a wrapper macro: #define v4l2_async_register_subdev_sensor(sd) \ __v4l2_async_register_subdev_sensor(sd, THIS_MODULE) This ensures the sensor driver module is properly referenced even when the sensor driver does not init the owner field before calling v4l2_async_register_subdev_sensor() and prevents premature module removal. | ||||
| CVE-2026-68166 | 1 Linux | 1 Linux Kernel | 2026-08-23 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: userfaultfd: prevent registration of special VMAs Vova Tokarev says: userfaultfd allows registration on shadow stack VMAs. With userfaultfd access, you can register on the shadow stack, discard a page ... and inject a page with chosen return addresses via UFFDIO_COPY. Update vma_can_userfault() to reject VM_SHADOW_STACK. While on it, also reject VM_SPECIAL so that if a driver would implement vm_uffd_ops, it wouldn't be possible to register special VMAs with userfaultfd. Since VM_SPECIAL includes VM_DONTEXPAND which is set but hugetlb, exclude hugetlb VMAs from the check for VM_SPECIAL. | ||||
| CVE-2026-74718 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: devlink: fix net namespace reference leak in reload devlink_nl_reload_doit() calls devlink_netns_get(), which returns a net with a held reference. When the requested namespace differs from the current one and the reload action is not DRIVER_REINIT, the function returns -EOPNOTSUPP without releasing the reference. Add the missing put_net() on this error path. | ||||
| CVE-2026-66915 | 1 Fabrikar.com | 1 Fabrik Extension For Joomla | 2026-08-22 | N/A |
| Joomla Extension - fabrikar.com - Remote code execution in Fabrik < 4.7.2 - An unauthenticated attacker could execute arbitrary code by using the ajax_calc feature of the calc plugin. | ||||
| CVE-2026-72286 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: SEV: Do not allow intra-host migration/mirroring of SNP VMs The intra-host migration/mirroring feature is not fully implemented for SEV-SNP VMs. The proper migration requires additional SNP-specific state such as guest_req_mutex, guest_req_buf, and guest_resp_buf to be transferred or initialized on the destination. The SNP VM mirroring requires vmsa features to be copied as well otherwise ASID would be bound to SNP range while VM is detected as a SEV VM. Reject SNP source VMs in migration/mirroring until proper SNP state transfer is implemented. [sean: let lines poke past 80 chars, tag for stable] | ||||
| CVE-2026-72322 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: mcast: Fix potential UAF in MLD delayed work A race condition exists between device teardown and incoming MLD query processing, leading to a Use-After-Free in the MLD delayed work. During device destruction, the primary reference to inet6_dev is dropped, which can drop its refcount to 0. The actual freeing of inet6_dev memory is deferred via RCU. Concurrently, the packet receive path runs under RCU read lock and obtains the inet6_dev pointer. Because the memory is RCU-protected, CPU-0 can safely dereference inet6_dev even if its refcount has hit 0. However, if CPU-0 calls igmp6_event_query() and schedules delayed work, it attempts to acquire a reference using in6_dev_hold(). This increments the refcount from 0 to 1, triggering a "refcount_t: addition on 0" warning. Since the inet6_dev memory is still scheduled to be freed after the RCU grace period, the device is freed while the work is still scheduled. When the work runs, it accesses the freed memory, causing a kernel panic. Fix this by using refcount_inc_not_zero() (via a new helper in6_dev_hold_safe()) to prevent acquiring a reference if the device is already being destroyed. If the refcount is 0, we do not schedule the work. | ||||
| CVE-2026-72412 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 9.3 Critical |
| In the Linux kernel, the following vulnerability has been resolved: s390/mm: Fix handling of _PAGE_UNUSED pte bit The _PAGE_UNUSED softbit should not really be lying around. Its sole purpose is to signal to try_to_unmap_one() and try_to_migrate_one() that the page can be discarded instead of being moved / swapped. KVM has no way to know why a page is being unmapped, so it sets the bit on userspace ptes corresponding to unused guest pages every time they get unmapped. KVM has no reasonable way to clear the bit once the page is in use again. While set_ptes() checks and clears the bit, other paths that set new ptes did not. This led to used pages being thrown out as if they were unused, causing guest corruption. Fix the issue by clearing the _PAGE_UNUSED bit for present ptes in set_pte(), i.e. whenever a present pte is getting set. The check in set_ptes() is then redundant and can be removed. Also fix gmap_helper_try_set_pte_unused() to only set the bit if the pte is present; the _PAGE_UNUSED bit is only defined for present ptes and thus should not be set for non-present ptes. | ||||
| CVE-2026-72456 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: apparmor: release exe file resources on path failure get_current_exe_path() takes both an exe_file reference and a path reference before resolving the path name. If aa_path_name() failed, it returned immediately and leaked both references. Route the failure through the common cleanup path so fput() and path_put() always run after the references are acquired. | ||||
| CVE-2026-72461 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: apparmor: fix refcount leak when updating the sk_ctx Currently update_sk_ctx() transfers the plabel reference, unfortunately it is also unconditionally put in the caller. Ideally we would make the caller conditionally put the reference based on whether it was transferred but for now just fix the bug by getting a reference. | ||||
| CVE-2026-72471 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: prevent potential lcn remains uninitialized The target VCN being sought was not found within runs[0], causing run_lookup() to return false. This causes run_lookup_entry() to return false, which in turn results in a len value of 0, and the new parameter passed to attr_data_get_block() is NULL. Collectively, these factors ultimately cause attr_data_get_block_locked() to exit prematurely without initializing lcn, thereby triggering [1]. To prevent [1], the clen check within ni_seek_data_or_hole() has been moved to occur before the lcn check. [1] BUG: KMSAN: uninit-value in ni_seek_data_or_hole+0x24f/0x5f0 fs/ntfs3/frecord.c:2862 ni_seek_data_or_hole+0x24f/0x5f0 fs/ntfs3/frecord.c:2862 ntfs_llseek+0x22a/0x4a0 fs/ntfs3/file.c:1530 vfs_llseek fs/read_write.c:391 [inline] | ||||
| CVE-2026-72473 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: xprtrdma: Decouple req recycling from RPC completion rl_kref formerly served two distinct lifetimes through a single refcount: it gated when a Reply could wake its RPC task, and it gated when an rpcrdma_req could return to its free pool. The marshal path took the Send-side reference only when SGEs needed DMA-unmap (sc_unmap_count > 0), which made a Send carrying only pre-registered buffers an exception: the Reply handler dropped rl_kref from 1 to 0 and freed the req while the HCA might still be DMA-reading from its send buffer. Give rl_kref a narrower job. The RPC layer takes one reference when slot allocation hands a req out. rpcrdma_prepare_send_sges() takes a Send-side reference unconditionally after WR preparation succeeds. xprt_rdma_free_slot() and xprt_rdma_bc_free_rqst() drop the RPC-layer reference; rpcrdma_sendctx_unmap() drops the Send-side reference. The req returns to its free pool only after both owners have signed off. The existing kref_init(&req->rl_kref) call in rpcrdma_prepare_send_sges() is removed. Initialization moves to the slot-allocation paths (xprt_rdma_alloc_slot and rpcrdma_bc_rqst_get), and the release callback re-arms rl_kref before the req returns to a free pool. A re-init in the marshal path would discard the RPC-layer reference that already exists on entry. Three invariants follow: - Any rpcrdma_req held by an rpc_rqst has rl_kref >= 1. xprt_rdma_alloc_slot(), rpcrdma_bc_rqst_get(), and the backlog-wake branch in xprt_rdma_alloc_slot() each kref_init rl_kref before publishing the req. Without this invariant, an RPC task that aborts between slot allocation and marshal (gss_refresh failure or signal during call_connect, for example) would drive xprt_release() -> xprt_rdma_free_slot() -> kref_put against a refcount of zero, saturating refcount_t and stranding the slot. - The Send-side reference is taken only after WR prep succeeds. A mapping failure in rpcrdma_prepare_send_sges() runs rpcrdma_sendctx_cancel(), which DMA-unmaps the sendctx and clears sc_req without touching rl_kref. The sendctx ring walks in rpcrdma_sendctx_put_locked() and rpcrdma_sendctxs_destroy() skip entries with sc_req == NULL, so a burst of -EIO marshal failures cannot hold reqs off rb_send_bufs. - The release callback re-arms rl_kref so the next consumer enters with the invariant satisfied. Replies now complete the RPC directly. rpcrdma_reply_handler() calls rpcrdma_complete_rqst() in place of kref_put on the non-LocalInv branch. The LocalInv branch already completes the RPC from frwr_unmap_async() and is unaffected. Because Send-side references can now outlive RPC completion, connection teardown drains sendctx entries whose unsignaled Sends never had a later signaled completion to walk the ring. rpcrdma_sendctxs_destroy() walks the active range and runs rpcrdma_sendctx_unmap() on each entry with a non-NULL sc_req before the request buffers are reset, and is moved ahead of rpcrdma_reqs_reset() in rpcrdma_xprt_disconnect() so the reqs are still in their pre-reset state when the Send-side refs are released. The drain creates a teardown-ordering hazard on the backchannel path. With the new lifetime, releasing a bc_prealloc req from rpcrdma_req_release() re-adds it to bc_pa_list. The disconnect in xprt_rdma_destroy() runs after xprt_destroy_backchannel() has already emptied bc_pa_list, so the drained reqs would otherwise leak. xprt_rdma_destroy() now runs xprt_rdma_bc_destroy(xprt, 0) a second time after the disconnect to reclaim them. | ||||
| CVE-2026-72482 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: gpib: fix double decrement of descriptor_busy in command_ioctl() commit d1857f8296dc ("gpib: fix use-after-free in IO ioctl handlers") introduced a descriptor_busy reference counter to pin struct gpib_descriptor across IO ioctl operations. In command_ioctl(), the error path inside the loop decrements descriptor_busy and breaks, but execution then falls through to the unconditional decrement after the loop, underflowing the counter to -1. This re-enables the use-after-free that the original fix was meant to prevent: a concurrent close_dev_ioctl() sees descriptor_busy == 0 on an actively-used descriptor and frees it. Remove the early decrement from the error path. The post-loop decrement already handles all exit paths, matching the correct pattern used in read_ioctl() and write_ioctl(). | ||||
| CVE-2026-74577 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: mpls: initialize rtm_tos in mpls_getroute() mpls_getroute() builds the RTM_NEWROUTE reply to an RTM_GETROUTE request by filling a struct rtmsg allocated from an skb whose data area is not zeroed (alloc_skb(NLMSG_GOODSIZE, ...)). It sets every field of the header except rtm_tos: r = nlmsg_data(nlh); r->rtm_family = AF_MPLS; r->rtm_dst_len = 20; r->rtm_src_len = 0; r->rtm_table = RT_TABLE_MAIN; r->rtm_type = RTN_UNICAST; r->rtm_scope = RT_SCOPE_UNIVERSE; r->rtm_protocol = rt->rt_protocol; r->rtm_flags = 0; struct rtmsg has no padding, so the one uninitialised byte rtm_tos (offset 3) is copied straight to user space on recvmsg(), leaking a byte of uninitialised heap memory. This is in contrast to mpls_dump_route(), which fills the very same header and does set rtm_tos = 0. Initialize rtm_tos to 0, matching mpls_dump_route(). Reproduced with KMSAN by adding an MPLS route and issuing a non-RTM_F_FIB_MATCH RTM_GETROUTE for its label: BUG: KMSAN: kernel-infoleak in _copy_to_iter+0x36c/0x33f0 _copy_to_iter+0x36c/0x33f0 __skb_datagram_iter+0x196/0x12c0 skb_copy_datagram_iter+0x5b/0x210 netlink_recvmsg+0x37b/0xef0 ... Uninit was created at: __alloc_skb+0x8ca/0x10e0 mpls_getroute+0x1280/0x3a40 rtnetlink_rcv_msg+0x1138/0x15a0 ... Byte 19 of 64 is uninitialized (byte 19 = nlmsghdr(16) + rtmsg offset 3 = rtm_tos) | ||||
| CVE-2026-74381 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: gpu: host1x: Allow entries in BO caches to be freed When a buffer object is pinned via host1x_bo_pin() with a cache, the resulting mapping is kept in the cache so it can be reused on subsequent pins. Each mapping held a reference to the underlying host1x_bo (taken in tegra_bo_pin / gather_bo_pin), so as long as a mapping was cached, the bo itself could not be freed. However, the only way to remove the cached mapping was through the free path of the buffer object. This meant that if a bo got cached, it could never get freed again. Resolve the circularity by holding a weak reference to the bo from the cache side. This is done by having the .pin callbacks not bump the bo's refcount -- instead the common Host1x bo code does so, except for the cache reference. Also move the remove-cache-mapping-on-free code into a common function inside Host1x code. This is only called from the TegraDRM GEM buffers since those are the only ones that can be cached at the moment. | ||||