| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vc4: Use managed KMS polling to fix UAF on unbind
vc4_kms_load() calls drm_kms_helper_poll_init() but the driver provides
no matching drm_kms_helper_poll_fini(). The output poll work stays
scheduled after unbind and runs on the freed drm_device:
# modprobe vc4; rmmod vc4; sleep 10
BUG: KASAN: slab-use-after-free in delayed_work_timer_fn
BUG: KASAN: slab-use-after-free in drm_client_dev_hotplug [drm]
Workqueue: events output_poll_execute [drm_kms_helper]
Allocated by task 171: __devm_drm_dev_alloc
Freed by task 262 (rmmod): drm_dev_put / component_del
Use drmm_kms_helper_poll_init() so polling is finalized with the device,
as other drivers do. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: 6fire: fix OOB write from device-reported iso length
usb6fire_pcm_in_urb_handler() sizes each outgoing isochronous packet as
(actual_length - 4) / (in_n_analog << 2) * (out_n_analog << 2) + 4, where
actual_length is the unsigned length the device reported for the matching
IN packet. A packet completed with status 0 and actual_length < 4 wraps
the subtraction to 0x7fffffec; a zero-length isochronous packet is legal
on the bus, and the preceding loop rejects only non-zero status. The sum
reaches memset() on out_urb->buffer, a 4832-byte object from
kcalloc(PCM_MAX_PACKET_SIZE, PCM_N_PACKETS_PER_URB).
Even without the wrap the result is out of bounds: at 88.2/96 kHz the
4-in/6-out scaling turns a full 420-byte IN packet into 628, so eight
packets span 5024 bytes of that buffer. usb_submit_urb() rejects an
over-long descriptor only after the memset() and the
usb6fire_pcm_playback() copy of user PCM data have run.
Guard the subtraction as the sibling usb6fire_pcm_capture() already does,
and limit the frame count to what fits in rt->out_packet_size, the OUT
endpoint's wMaxPacketSize. This bounds total_length by the buffer size
while keeping each packet length aligned to a whole output frame.
BUG: KASAN: out-of-bounds in usb6fire_pcm_in_urb_handler (sound/usb/6fire/pcm.c:338)
Write of size 18446744073709551456 at addr ffff88802a3d0000 by task vhci_rx/5018
Call Trace:
dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120)
print_report (mm/kasan/report.c:378 mm/kasan/report.c:482)
kasan_report (mm/kasan/report.c:595)
kasan_check_range (mm/kasan/generic.c:186 mm/kasan/generic.c:200)
__asan_memset (mm/kasan/shadow.c:84)
usb6fire_pcm_in_urb_handler (sound/usb/6fire/pcm.c:338)
__usb_hcd_giveback_urb (drivers/usb/core/hcd.c:1657)
usb_hcd_giveback_urb (drivers/usb/core/hcd.c:1741)
vhci_rx_loop (drivers/usb/usbip/vhci_rx.c:107 drivers/usb/usbip/vhci_rx.c:242)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
ret_from_fork_asm (arch/x86/entry/entry_64.S:245)
Allocated by task 10:
__kmalloc_cache_noprof (mm/slub.c:5563)
usb6fire_pcm_init (sound/usb/6fire/pcm.c:560 sound/usb/6fire/pcm.c:595)
usb6fire_chip_probe (sound/usb/6fire/chip.c:133)
usb_probe_interface (drivers/usb/core/driver.c:399)
The buggy address belongs to the object at ffff88802a3d0000
which belongs to the cache kmalloc-8k of size 8192
The buggy address is located 0 bytes inside of
4832-byte region [ffff88802a3d0000, ffff88802a3d12e0)
Kernel panic - not syncing: Fatal exception in interrupt |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm/dp: skip PUSH_IDLE when the link was never enabled
msm_dp_display_atomic_enable() returns early when link training fails,
leaving ->power_on false and the main link down.
msm_dp_display_atomic_disable() nevertheless writes DP_STATE_CTRL_PUSH_IDLE
and waits for an idle-pattern completion that cannot arrive, so every failed
enable is followed by "PUSH_IDLE pattern timedout".
Every other step of the teardown is already gated on that flag:
msm_dp_display_disable(), called from .atomic_post_disable(), returns early
on !power_on. The PUSH_IDLE write is the only one that is not, so the
controller's runtime-PM reference is then dropped without the link having
been taken down.
On glymur (Snapdragon X2 Elite) the consequence is not a warning. The SoC
does not survive it: TrustZone force-stops the SOCCP and ADSP remote
processors and the machine resets silently about 50 ms later, with no oops
and no panic. On an ASUS Zenbook A16 (UX3607OA), whose eDP panel does not
currently train, this reproduces without any compositor or GPU involvement:
# eDP enable has already failed with "Failed link training (rc=-104)"
echo 1 > /sys/class/graphics/fb0/blank
[535.645455] === marker ===
[535.694833] qcom_q6v5_pas d00000.remoteproc: fatal error received: \
sys_m_smsm.c:512:TZ force stop
[535.694875] remoteproc remoteproc0: crash detected in soccp: type fatal error
[535.728857] qcom_q6v5_pas 6800000.remoteproc: fatal error received: \
sys_m_smsm.c:783:err fatal notification received from TZ
<SoC reset>
Gate the PUSH_IDLE write on ->power_on so the disable path is consistent
with the rest of the teardown. With this applied the same sequence is
harmless and the machine stays up; without it, it resets every time.
The unconditional write dates back to the original DP driver
(c943b4948b58 ("drm/msm/dp: add displayPort driver support")), but the
surrounding code has been restructured several times since, so no Fixes:
tag is offered.
Note that the eDP link-training failure that exposes this on the A16 is a
separate problem in the glymur eDP PHY and is reported separately; this
change is about not damaging the machine when training fails, for whatever
reason.
Tested on ASUS Zenbook A16 (UX3607OA), Snapdragon X2 Elite Extreme, on
linux-next next-20260803 and next-20260807. The machine has since been
running next-20260807 with this patch as its daily driver.
Patchwork: https://patchwork.freedesktop.org/patch/745167/ |
| In the Linux kernel, the following vulnerability has been resolved:
neighbour: Enforce min/max to NDTPA_INTERVAL_PROBE_TIME_MS.
NDTPA_INTERVAL_PROBE_TIME_MS sets .type and .min but misses
.validation_type, so no validation is applied:
# ynl --family rt-neigh --do setneightbl \
--json '{"name": "arp_cache", "parms": {"interval-probe-time-ms": 0}}'
# ynl --family rt-neigh --dump getneightbl --output-json | \
jq '.[] | select(.name == "arp_cache" and has("config"))
| .parms["interval-probe-time-ms"]'
0
Moreover, nla_get_msecs() uses msecs_to_jiffies(), and u64 is
silently cast to u32, so a larger value can bypass the min check:
e.g. 4294967296 == 0x100000000
# ynl --family rt-neigh --do setneightbl \
--json '{"name": "arp_cache", "parms": {"interval-probe-time-ms": 4294967296}}'
# ynl --family rt-neigh --dump getneightbl --output-json | \
jq '.[] | select(.name == "arp_cache" and has("config"))
| .parms["interval-probe-time-ms"]'
0
msecs_to_jiffies() returns MAX_JIFFY_OFFSET if the value is
larger than INT_MAX. Also, INT_MAX ms overflows int NEIGH_VAR()
when HZ > 1000 (Alpha, MIPS), and passing a negative integer to
queue_delayed_work(unsigned long delay) causes sign extension,
which wraps around the expiry time to the past, resulting in it
being handled as 0 delay in the timer wheel.
Let's use NLA_POLICY_FULL_RANGE() and limit the max to 1 day.
The same max check is applied to sysctl as well.
Note that this controls the probe interval for NTF_MANAGED
entries, so the max of 1 day is unlikely to break any
deployments. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: mesh: release the channel if start fails
ieee80211_join_mesh() acquires a channel context and then calls
ieee80211_start_mesh(), which can fail. In that case, the chanctx
isn't released then interface removal will attempt to unassign it
after it's removed from the driver, hitting:
wlan0: Failed check-sdata-in-driver check, flags: 0x0
WARNING: net/mac80211/driver-ops.c:366 at drv_unassign_vif_chanctx
ieee80211_assign_link_chanctx
__ieee80211_link_release_channel
ieee80211_link_release_channel
ieee80211_teardown_sdata
unregister_netdevice_many_notify
_cfg80211_unregister_wdev
ieee80211_remove_interfaces
ieee80211_unregister_hw
mac80211_hwsim_del_radio
hwsim_exit_net
Correctly release the channel on start failures. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: don't get the radio mask for netdev-less wdevs
cfg80211_calculate_bi_data() calls rdev_get_radio_mask() with
wdev->netdev, which can be NULL and then crashes in mac80211.
To avoid that, invert the order of checks since wdev->netdev
is always valid for beaconing interfaces. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: mesh: reset the CSA state when leaving
ifmsh->csa is allocated in ieee80211_mesh_csa_beacon() and only freed
in ieee80211_mesh_finish_csa(), i.e. when the channel switch completes.
Leaving the mesh while a switch is still pending therefore leaks it.
Additionally, ifmsh->csa_role and ifmsh->chsw_ttl have their state leak
in this case, so things can get mixed up in addition to the memory
leak.
Refactor the reset and call it in ieee80211_stop_mesh() to fix it all. |
| In the Linux kernel, the following vulnerability has been resolved:
net: wwan: t7xx: validate the netif index in t7xx_ccmni_recv_skb()
The netif index carried in the DPMAIF PIT header is five bits wide,
but ccmni_inst[] only has room for NIC_DEV_MAX (21) entries.
t7xx_ccmni_recv_skb() indexes the array without a bounds check, so
indexes 21 to 31 read past it. The out-of-bounds value lands in the
callback table that follows the array, which is never NULL, so the
existing !ccmni check does not catch it and the driver dereferences
whatever sits there as a struct t7xx_ccmni.
Drop the skb when the index is out of range.
Verified in a QEMU guest with a fault injector setting the netif
index to 25: the unpatched driver reads a value past ccmni_inst[],
which lands in the callback table, and dereferences it far enough to
queue the skb. With this check the packet is dropped. Well-formed
traffic on index 0 is unaffected.
Changes in v2: none. |
| In the Linux kernel, the following vulnerability has been resolved:
perf: Fix null pointer access in is_include_guest_event()
A typical module unload occurring event when there is an active perf
connection leads to freeing of the pmu pointer. The call log is something
like:
..
__pmu_detach_event
pmu_detach_event
pmu_detach_events
perf_pmu_unregister
..
__pmu_detach_event() sets event->pmu to null. When the perf connection
finally is closed, the following stack trace is observed:
Oops: general protection fault, kernel NULL pointer dereference
...
RIP: 0010:_free_event+0x3e/0x370
...
Call Trace:
...
perf_event_release_kernel+0x260/0x2d0
perf_release+0x12/0x20
A call to mediated_pmu_unaccount_event() inside _free_event() is the root
cause of this crash. Adding a check inside is_include_guest_event() ensures
we don't accidentally access a null pmu ptr. In addition to this, we will
now call mediated_pmu_unaccount_event() before clearing the pmu ptr so that
nr_include_guest_events counts are maintained correctly. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: ibss: ref BSS entry for joined event
When the IBSS is joined, we only record the BSSID/channel in the event
and look up the BSS entry when processing it. However, that's racy,
e.g. a new scan with NL80211_SCAN_FLAG_FLUSH can remove it, causing a
warning in the event work:
!bss
WARNING: net/wireless/ibss.c:37 at __cfg80211_ibss_joined+0x3d3/0x440
Workqueue: cfg80211 cfg80211_event_work
cfg80211_process_wdev_events+0x39f/0x5b0 net/wireless/util.c:1144
cfg80211_process_rdev_events+0xa1/0x110 net/wireless/util.c:1179
cfg80211_event_work+0x2f/0x40 net/wireless/core.c:393
Do the lookup early (the driver is expected to only join an IBSS that
has a BSS entry) and keep a reference to it. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (pmbus/core) increase number of phases and add new mask
Increase the number of phases to 16 as a new upcoming device supports
such a number.
While at it, add a new mask for controlling the source of the output
voltage.
Note (groeck):
This patch was meant to prepare for support of MAX20826 and compatible
devices, which support more than 10 phases per page. However, Sashiko
reports that the mp2975 driver already supports up to 14 phases, and the
mp2856 driver supports up to 12 phases. This already has the potential for
out-of-bounds writes when probing the affected chips, making this patch a
bug fix. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: handle lack of space when cleaning up verity items
When enable_verity() hits the qgroup limit, rollback_verity() needs its
own metadata reservation. When the qgroup limit or lack of space refuses
the rollback, the whole filesystem is forced read-only even though the
qgroup limit was for one subvolume only. Also orphan cleanup at the next
mount fails the same way, so the leftover items are never removed: with
-EDQUOT the subvolume stays unreachable, and with -ENOSPC on a full
filesystem the next read-write mount fails.
Start transactions with btrfs_start_transaction_fallback_global_rsv() in
btrfs_orphan_cleanup(), drop_verity_items() and rollback_verity(). Those
calls only delete items and free the space in the end, so they may use
the global reserve and skip the qgroup limit, which avoids -ENOSPC and
-EDQUOT. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: set up the TX info early to fix failure paths
The previous commit 2c51457d930f ("wifi: mac80211: free ack status
frame on TX header build failure") cleaned up the leak, but still
left the code a bit messy and the failed SKB didn't get reported
to userspace.
Fix this up by initialising skb->cb[] earlier, which allows using
ieee80211_free_txskb() and therefore reports it for the failure
in ieee80211_build_hdr(), and unifies the ieee80211_skb_resize()
failure path with it. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: atr: fix dangling adapter pointer on add failure
i2c_atr_add_adapter() stores atr->adapter[chan_id] before
i2c_add_adapter() so that the I2C bus notifier can match child clients
during registration. On failure the channel is freed but the slot was
left pointing at freed memory, which can lead to use-after-free in
i2c_atr_del_adapter() / cleanup and also block reuse with -EEXIST.
Clear the slot on the i2c_add_adapter() error path before freeing chan. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mwifiex: bound the pairwise-cipher OUI walk to the IE length
mwifiex_search_oui_in_ie() reads a pairwise-cipher (PTK) count from a
beacon/probe-response RSN or WPA information element and then walks that
many 4-byte OUIs, comparing each with memcmp(). The count comes straight
from the (attacker-supplied) IE and is never checked against the
element's own length, and the callers admit the element on element_id
alone (has_ieee_hdr() / has_vendor_hdr(), no length check). A crafted
RSN/WPA IE with a large pairwise count therefore makes the walk read up
to 255 * 4 bytes past the element -- an out-of-bounds read of the
kmemdup()'d beacon buffer, reachable from any AP whose beacon/probe
response is processed during scan-result parsing.
Pass the number of IE bytes available at the OUI list and bound the walk
to the element. Keep the length signed and reject a negative value
before any unsigned arithmetic, so a small or zero IE length cannot
underflow to a large size_t and defeat the bound.
Found by 0sec automated security-research tooling (https://0sec.ai). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: p54: require a full exp_if record in PDR_INTERFACE_LIST
The PDR_INTERFACE_LIST loop only checks that the record start is within
the entry before reading an entire struct exp_if from it. A truncated
trailing record makes the if_id/variant reads cross the entry boundary
into the heap beyond the EEPROM buffer (verified with a KASAN
reproducer of the loop). The variant also feeds the synth front-end
selection, so this is not only a leak.
Advance only while a full record still fits in the entry. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: p54: validate curve data length in the calibration curve converters
p54_convert_rev0() and p54_convert_rev1() read calibration curve
data from the device-supplied EEPROM entry using channel and
points-per-channel counts taken verbatim from that same entry, so
an entry that declares more data than it carries drives an
out-of-bounds read past the EEPROM buffer (verified with a KASAN
reproducer of the conversion loop). The sibling converters
p54_convert_output_limits() and p54_convert_db() already validate
their counts against the entry length; this path was missed.
Reject the entry when the counts do not fit in the entry data. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: Serialize local codec list cleanup
hci_dev_close_sync() clears hdev->local_codecs after releasing hdev->lock.
Codec list additions and both traversals in sco_sock_getsockopt() use that
lock, but the close path does not. A close and BT_CODEC query can therefore
interleave as follows:
hci_dev_close_sync() sco_sock_getsockopt()
hci_dev_lock()
fetch codec entry
hci_codec_list_clear()
kfree(entry)
read entry->id
The reader then accesses an entry which the close path has freed. KASAN
BUG: KASAN: slab-use-after-free in sco_sock_getsockopt+0xfa0/0xfe0
Read of size 1 at addr ffff8881001c3450
Call Trace:
sco_sock_getsockopt+0xfa0/0xfe0
do_sock_getsockopt+0x537/0x7b0
__sys_getsockopt+0xf2/0x170
Allocated by task 92:
hci_codec_list_add.isra.0+0x2c/0x440
hci_read_codec_capabilities+0x224/0x590
hci_read_supported_codecs+0x2c2/0x640
Freed by task 92:
kfree+0x131/0x3c0
hci_codec_list_clear+0xd8/0x160
hci_dev_close_sync+0x92a/0xfa0
Take hdev->lock around the clear operation at its existing point in the
close path. This makes the clear wait for active readers and prevents a new
traversal until the list is empty without changing teardown ordering. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: add HE 6 GHz capability in the scan elems len
The HE 6 GHz Band Capability element is in the probe request for
every band if 6 GHz is supported, so add the size to scan_ies_len.
Otherwise, building probe request elements can fail, triggering the
WARN_ON in __ieee80211_start_scan(). |
| Use after free in Microsoft Edge (Chromium-based) allows an authorized attacker to execute code over a network. |
